Lowell 30HRK User Manual

30HRK

INSTALLATION SHEET

The 30HRK half-rack mounting kit allows the installer to mount

the Lowell MA30 mixer/amplifier in a Lowell half-size equipment

rack such as the Lowell LHFR-814 or LHFR-1214.

Step 1

The 30HRK half-rack mounting kit includes two (2) brackets, four

(4) 8-32 self-tapping screws, and four (4) 6-32 self-tapping

screws as shown in figure .

1

1

1

Step 2

Remove the two (2) chassis cover screws as shown in figure .

2

Also remove the same two (2) cover screws on the opposite side

of the chassis.

Screw Note:

The chassis screws that you removed, have a unique metric size

and thread pitch. Discard those screws. Provided with the kit are

8-32 self-tapping and 6-32 self-tapping screws that will use the
existing metric threaded holes as starter holes and will thread

new tapped holes that will securely attach the mounting brackets.

Step 3

Line up a bracket with the holes in the MA30 and securely tighten

the two (2) 8-32 self-tapping screws and the two (2) 6-32 self-

tapping screws where shown in figure .

3

Step 4

Line up the second bracket with the holes on the opposite side of

the MA30 and securely tighten the two (2) 8-32 self-tapping

screws and two (2) 6-32 self-tapping screws. The completed

assembly with the half-rack mount brackets installed is shown in

figure .

4

2

Remove

Remove

3

8-32 black self-tapping screws

6-32 black self-tapping screws

4

Step 5

Finally, mount the MA30 mixer/amplifier in a Lowell half-rack

using standard 10-32 Phillips-head machine screws (like the

Lowell model RS or RSP rack screws) with integral plastic

washers to protect the finish on the front of the mounting brackets.

Rack mounting screws are not included with the 30HRK kit.

Lowell Manufacturing Company

Call: 800-325-9660

Fax: [phone] Click: www.lowellmfg.com

100 Integram Drive Pacific, Missouri 63069 U.S.A.

REMOVABLE

PHOENIX

Instruction Sheet

CONNECTOR

P/N: 20147

Issued: 9-10-14