Lowell 10KLVC-DB Datasheet
Lowell Manufacturing Company • 100 Integram Drive • Pacific, Missouri 63069 U.S.A.
Call 800.325.9660, 636.257.3400 • Fax 636.257.6606 • Click www.lowellmfg.com
Lowell makes every effort to provide accurate information and reserves the right to change specifications and/or improve manufacturing methods.
Download and print this spec from www.lowellmfg.com to insure that you have the most current information
4a-109
pg 1 of 2
Printed in U.S.A. © 09-25-06
10KLVC Series
10k Ohm Potentiometer Control
Quality Features
10K ohm linear taper potentiometer.
Provides level adjustment of voltage controlled
amplifiers from a single remote location.
Continuous, rotary control with stops at 0 and Max plus
incremental detents for precision feel.
Clean styling matches Lowell’s LVC Series 25W, 50W
and 100W - 70V attenuators.
Model Type Taper Attenuation Resistance Plate Style** Plate Plate Control Control Control
coverplate/subplate Width Height Width Height Depth
10KLVC-DW Potentiometer Linear Continuous* 10,000 ohm White/White 2.75” 4.5” 1.0” 1.75” 1.25”
10KLVC-DI Potentiometer Linear Continuous* 10,000 ohm Ivory/Ivory 2.75” 4.5” 1.0” 1.75” 1.25”
10KLVC-DB Potentiometer Linear Continuous* 10,000 ohm Black/Black 2.75” 4.5” 1.0” 1.75” 1.25”
10KLVC-DSW Potentiometer Linear Continuous* 10,000 ohm Stainless/White 2.75” 4.5” 1.0” 1.75” 1.25”
10KLVC-DSB Potentiometer Linear Continuous* 10,000 ohm Stainless/Black 2.75” 4.5” 1.0” 1.75” 1.25”
10KLVC-RM Potentiometer Linear Continuous* 10,000 ohm Rackmount Adhesive 2” 2.5” 1.0” 1.75” 1.25”
*Continuous with stop at minimum and maximum levels. **All plates are 1-gang Decora-style except rackmount model 10KLVC-RM
Description
Potentiometer Series 10KLVC is a 10k ohm linear taper control for single-point remote level adjustment of voltage controlled amplifiers (VCA) by others. Decora-style assemblies
match other Lowell LVC Series devices and are offered in
white, ivory, black or stainless steel with white or black subplate. A rackmount version is also available with an adhesive
dial scale. All feature phoenix-style removable screw termination strips for pre-wire with capacity for 14ga wire.
Lowell Series 10KLVC is designed to interface directly with
3-wire, 0 to 10 volt control inputs that are typical on most
voltage controlled amplifiers (by others). The 10k ohm potentiometer allows the amplifier’s control voltage to be
set/adjusted from a single remote location.
Decora-style models include the control assembly on a subplate with comfortable knob and wallplate. The subplate is
printed with the words: Volume, 0, and MAX. Assemblies are
offered in white, black or stainless steel with white or black
subplate. Additionally, the 10KLVC Series share the same
plate styling as Lowell’s LVC Series 25W, 50W and 100W 70V attenuator controls for consistent appearance of control
devices.
Rackmount model includes the control assembly, black knob
and an adhesive dial scale with Lowell’s PocketID
TM
window
for inserting a 1/2”H label. The rackmount device is designed
for mounting to a field punched rack panel (2RU or larger) or
installed into Lowell’s pre-punched 2RU panel for volume
controls (Model LVC-RMP order separately). Note: When the
rackmount control is mounted in Lowell’s LVC-RMP panel
the adhesive dial scale (shipped with the device) is not used.
10KLVC-RM
Rackmount version
10KLVC-DW 10KLVC-DB 10KLVC-DSB
Decora Decora Decora
Plastic Plastic Stainless / Plastic
Mount 10KLVC-RM to Lowell’s pre-punched 2RU panel for volume controls
(order panel Model LVC-RMP separately)
Mount 10KLVC-RM to any field punched rackmount panel.
Use the adhesive dial scale (2”W x 2.5”H) to indicate level.
Adhesive dial scale with
PocketID label window. Use
with blank panels.
Dial scale not required when
mounting to Lowell’s
LVC-RMP device panel order separately)
10KLVC Series
10k Ohm Potentiometer Control
Lowell Manufacturing Company • 100 Integram Drive • Pacific, Missouri 63069 U.S.A.
Call 800.325.9660, 636.257.3400 • Fax 636.257.6606 • Click www.lowellmfg.com
Lowell makes every effort to provide accurate information and reserves the right to change specifications and/or improve manufacturing methods.
Download and print this spec from www.lowellmfg.com to insure that you have the most current information
4a-109
pg 2 of 2
AUDIO
12”/10”
Speakers &
Accessories
8”
Speakers &
Accessories
6”
Speakers &
Accessories
4”
Speakers &
Accessories
Horn
Speakers &
Accessories
Masking
Speakers &
Generators
Control
Accessories
& Electronics
A & E Specifications
Potentiometer control shall be Lowell Series 10KLVC Model
_______. It shall be a linear taper style potentiometer with
10,000 (10k) ohm resistance. It shall be compatible with 3wire 0-10 volt control inputs on voltage control amplifiers (by
others) for level adjustment from a single remote location.
Attenuation shall be continuously variable with stops at minimum and maximum levels. It shall include the control mounted to a decora-style subplate with printing (Volume, 0, MAX)
a knob and coverplate.
Rackmount style shall include the device (without subplate
and wallplate) with a separate knob and an adhesive dial
scale size 2”W x 2.5”H with PocketID label window for
mounting on a field punched (2RU or larger) rack panel or
installed into Lowell’s pre-punched 2RU panel for volume
controls (Model LVC-RMP order separately).
10KLVC Series Dimensions
Volume Controls
10KLVC Series Schematic and Connection Diagrams
1.25”
1.0”
1.75”
Loading...