Model Series
10015LVC Volume Controls
Compact, easy-install volume controls with rotary switch
provide precise level adjustment of single or multiple speaker
lines. Varied styles of wall plate. See model numbers in chart
on next page.
Features
• 100W power rating
• 1.5dB per step attenuation
• Rotary switch (10–Off). Stops at "Off" and "10" (noncontinuous rotation).
• Easy-connect, phoenix style plug-in screw termination
strips for pre-wire convenience; wire capacity up to
14-gauge.
• Standard or decorator style one-gang wall plate in various
colors
• Fits standard single gang E.O. box with minimum depth
of 2.125" (order separately)
• ETL Listed
White
Standard Style
White
Decorator Style
Spec No. 1794 [REV. 09.23.16] Page 1/2
Stainless Steel
Standard Style
Black
Decorator Style
Almond
Standard Style
Almond
Decorator Style
Options & Accessories (order separately)
• Surface-Mount Box (P1X): One-gang steel surface
box with knockouts and white nish. 4.625"H x 2.875"W
x 2.5"D. Includes two U-clips.
• Rackmount Panel with eight positions (D8P-ID-3):
3U x 19"W panel will hold up to eight volume controls.
Rear lacing ange for wire management. Plastic window
for paper label.
• Rackmount Panel with nine positions (D9P-ID-3):
3U x 19"W panel has narrow spacing to hold up to nine
volume controls. Panel also accepts two-gang devices
mounted in alternate spacing. Rear lacing ange for wire
management. Plastic window for paper label.
A&E Specications
The ETL Listed volume control shall be Lowell Model
_______________ with 100W power rating and 1.5dB per
step attenuation. It shall include a ___________ (standard,
decorator style) one-gang wall plate with _________ (black,
white, almond, stainless steel & black, stainless steel & white)
nish. The device shall mount in an E.O. box with minimum
inside dimensions of 1.875"W x 2.688"H x 2.125"D (box not
included).
Stainless Steel
& White
Decorator Style
Optional P1X
surface box
Stainless Steel
& Black
Decorator Style
Optional D8P-ID-3 rackmount panel
with mounted volume controls and
DBB blank ller plates for unused positions
Side View
Lowell makes every effort to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without notication.
©2016 Lowell Manufacturing Company, 100 Integram Dr., Pacic MO 63069 | 800.325.9660 | www.lowellmfg.com
Spec No. 1794 [REV. 09.23.16] Page 2/2
Model No. Summary
Power Switch Switch Attenuation Plate Plate
Model No. Rating Type Type Positions Step / Total Style Finish
10015LVC 100W Auto-trans Rotary 10-off 1.5dB / 13.5dB Standard Stainless steel
10015LVC-SW 100W Auto-trans Rotary 10-off 1.5dB / 13.5dB Standard White
10015LVC-DW 100W Auto-trans Rotary 10-off 1.5dB / 13.5dB Decorator White
10015LVC-DB 100W Auto-trans Rotary 10-off 1.5dB / 13.5dB Decorator Black
10015LVC-DA 100W Auto-trans Rotary 10-off 1.5dB / 13.5dB Decorator Almond
10015LVC-DSW 100W Auto-trans Rotary 10-off 1.5dB / 13.5dB Decorator Stainless steel & white
10015LVC-DSB 100W Auto-trans Rotary 10-off 1.5dB / 13.5dB Decorator Stainless steel & black
Technical
Model Plate Plate
Series Width Height A B C
10015LVC 2.75" 4.5" 2.125" 2.5" 1.875"
Mounts E.O. Boxes Noted:
• 4"Sq x 2.125"D with raised mud ring (RACO 232, 235, or equiv.)
• 1-gang handy box 2.125"D (RACO 670, 671, 678, or equiv.) **
• 2-gang switch box 2.125"D (RACO 680, 681, 683, 685, or equiv.) *
• Multi-gang switch box 2.5"D (RACO 686, 687, or equiv.) *
• Lowell P1X surface box
* Two-gang and multi-gang switch boxes noted are for use with decorator
style units in multi-device installations (multi-gang trim plate by others).
** 100W units are deeper than other LVC models so a one-gang handy box
Mounts in E.O. box with
minimum opening of 1.875"W
x 2.688"H x 2.125"D
will allow only minimal room for control and wiring.
Wiring & Schematics
Lowell makes every effort to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without notication.
©2016 Lowell Manufacturing Company, 100 Integram Dr., Pacic MO 63069 | 800.325.9660 | www.lowellmfg.com