Lovencare mirage, BP 2756 Instruction Manual

Instruction Manual

BP 2756

mirage

Congratulations on your new quality Love N Care product from our exclusive range of baby products.
This exceptional design combines the most unique features that any baby product oers.

We are condent that you will appreciate its many highlights, including its reliability and durability.
Your new product has been manufactured to comply with the Highest Quality Standards and comes
with a 12-month warranty.

As you will soon learn there are many more great features about your new Love N Care product.

2

Care should be taken if the stroller is to be used on stairs or escalators.

FOLLOW THE MANUFACTURER’S INSTRUCTIONS.

To avoid serious injury always use the harness provided to secure the child.
(Adjust the straps to suit the body size of your child)

THE MAXIMUM WEIGHT FOR THE STROLLER SEAT IS 22KG.
THE MAXIMUM WEIGHT FOR THE BOTTOM BASKET IS 5KG.

PUT ON ALL THE BRAKES WHENEVER YOU PARK THE STROLLER.
ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER IS STATIONARY.

Care should be taken whilst folding and unfolding stroller to prevent fingers being trapped.

Ensure your child’s fingers, hands and all other body parts are clear from any moving

part when adjusting the seat or handle on your stroller.

This stroller should not be used near an open fire or an exposed flame.

It is unsafe to use accessories other than those supplied or approved by Love N Care.

Safety guidelines and instructions must always be followed before making use of this product,
please retain these instructions for future reference.
This product complies with product standard AS/NZS 2088:2000

WARNING: TO AVOID INJURY OR DEATH:

DO NOT LEAVE CHILDREN UNATTENDED.

SECURE THE CHILD IN THE HARNESS AT ALL TIMES.
DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER.

MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU ADJUST THE
STROLLER, OTHERWISE THEY MAY BE INJURED.

USE THE HARNESS AT ALL TIMES.

WHEN NOT IN USE DISCONNECT SHOULDER STRAPS FROM THE WAIST STRAP
AND/OR BUCKLE.
The harness can form loops which may be a strangulation hazard. Never leave a harness
connected when not fitted to a child in the stroller.

3

CLEANING AND MAINTENANCE

ALL LOVE N CARE PRODUCTS HAVE ONE YEAR WARRANTY FROM THE DATE OF PURCHASE.

IT IS RECOMMENDED TO REGULARLY INSPECT AND MAINTAIN MOVEMENT OF LOCKING DEVICES AND SECURITY
OF ESSENTIAL COMPONENTS.
REGULARLY CHECK ALL PARTS FOR WEAR AND TEAR.
DO NOT USE SPRAY LUBRICANTS, SIMPLY WIPE CLEAN AFTER USE.
THE SEAT LINER CAN BE CLEANED BY SPONGING WITH WARM SOAPY WATER AND A MILD DETERGENT. A MILD
DISINFECTANT MAY BE USED IF DESIRED.
STUBBORN MARKS MAY BE REMOVED WITH A NON ABRASICE CREAM CLEANER.
NEVER CLEAN WITH ABRASIVE, AMMONIA BASED, BLEACH BASED OR SPIRIT TYPE CLEANERS.

THE FOOD TRAY CAN BE CLEANED WITH A DAMP CLOTH.(MIRAGE MODEL)

FABRIC CARE

- HAND WASH ONLY

- DO NOT BLEACH

- DO NOT TUMBLE DRY

- DO NOT IRON

- DO NOT WRING

- DO NOT DRY CLEAN

4

PARTS LIST

WHEN YOU OPEN YOUR STROLLER CARTON PLEASE ENSURE
YOU HAVE ALL THE ITEMS:

1. STROLLER REVERSIBLE HANDLE

2. BOOT COVER

3. STROLLER SEAT

4. FOOD TRAY

5. TETHER STRAP

6. 4-ALL SWIVEL WHEELS

1.

2.

3.

4.

5.

6.

5

ASSEMBLY INSTRUCTIONS

1. REMOVE THE STROLLER FROM THE BOX.
START WITH THE STROLLER SEAT (NO.3)
PULL THE LOCKING CLIP (AS SHOWN IN THE IMAGE )
TO RELEASE THE STROLLER.

ASSEMBLE THE FRAME

2. ONCE THE CLIP IS RELEASED YOU
SHOULD START TO PULL THE
FOOTREST AWAY FROM THE HOOD
(AS SHOWN)

3. ENSURE THAT THE LOCKING
MECHANISM SNAPS INTO PLACE.
YOU SHOULD HEAR IT CLICK.

4. REPEAT ON THE OTHER SIDE
ENSURE THAT THE LOCKING
MECHANISM SNAPS INTO PLACE.
YOU SHOULD HEAR IT CLICK.

5. THE ASSEMBLED
FRAME

6

ASSEMBLY INSTRUCTIONS

INSERTING THE WHEELS.

INSERT ONE WHEEL AT A TIME.
AT THE TOP OF EACH WHEEL THERE IS AN OPENING.
THESE OPENINGS ARE TO GO ON EACH OF THE 4 ENDS OF THE SEAT.

PUSH THE WHEELS INTO PLACE.
ENSURE YOU HEAR A CLICK.
PULL ON THEM BEFORE YOU USE THEM TO ENSURE
THEY ARE LOCKED SECURELY.

TO REMOVE EACH WHEEL PUSH THE PIN IN.

7

ASSEMBLY INSTRUCTIONS

ATTACHING THE HANDLE:

WE ARE GOING TO ATTACH PART (1)
HANDLE TO THE SEAT FRAME.

THERE ARE 2 OPENINGS ON EACH SIDE
OF THE SEAT WHERE THE ENDS OF THE
HANDLE WILL SLIDE IN.

THERE IS A BUTTON WHICH WILL LOCK THE HANDLE INTO PLACE

SLIDE THE HANDLES INTO EACH SIDE AND DEPRESS THE BUTTONS.
WHEN THEY ARE DEPRESSED SLIDE THE HANDLE DOWN UNTIL
YOU HEAR THEM CLICK INTO PLACE.
PULL ON THE HANDLE TO MAKE SURE IT IS LOCKED IN.
REPEAT ON THE OTHER SIDE.

ATTACHING THE TETHER STRAP

LOOP THE STRAP THOUGH THE OPENING.
UNTIL IT IS TENSIONED.
IT SHOULD LOOK LIKE THIS.

WARNING

USE THIS STRAP TO STOP THE
STROLLER ROLLING AWAY

LOOP THE STRAP

ENSURE THE HANDLE IS
INSTALLED LIKE THIS

8

ASSEMBLY INSTRUCTIONS

ATTACH THE FRONT BAR:

AT THIS POINT WE WILL BE INSERTING THE FOOD TRAY (4)
ONTO THE FRAME.

INSERT THE BAR (4) ONTO THE FRAME
OF THE SEAT.
ENSURE THAT IT CLICKS INTO PLACE.
(PULL ON IT TO MAKE SURE IT IS ASSEMBLED
CORRECTLY)

TO RELEASE THE BAR.
PRESS THE BUTTON LOCATED
ON EACH SIDE OF THE SEAT.
THEN LIFT THE BAR OUT.

9

ASSEMBLY INSTRUCTIONS

ATTACHING THE BOOT COVER:

WE WILL NOW ATTACH THE BOOT COVER (2) (IF REQUIRED)
SLIDE THE CLOSED END OVER THE FOOT REST OF THE PRAM.
ATTACH THE TOP WITH THE PRESS STUDS WHICH LOOP
AROUND THE FRAME (NOT THE HANDLE) AND THEN LOCK
INTO PLACE.
REPEAT ON THE OTHER SIDE.

THE ASSEMBLED BOOT COVER SHOULD LOOK LIKE THIS

10

HOW TO USE

HOW TO LOCK THE WHEELS/USE ALL SWIVEL MODE:

ALL THE WHEELS CAN BE FIXED OR USED IN ALL SWIVEL MODE.
TO HAVE THE WHEELS IN A FIXED MOTION PULL UP THE
PLASTIC LEVER ON THE FRONT OF EACH WHEEL AND ALIGN
IT WITH THE OPENING..
THIS SHOULD LOCK THE WHEELS.

TO USE THE WHEELS IN SWIVEL MODE PUSH THE LEVER
DOWN. THE WHEELS SHOULD BE ABLE TO BE MOVED IN
ALL DIRECTIONS.

HOW TO USE THE BRAKES:

TO APPLY THE BRAKES:
PUSH DOWN ON THE LEVER

TO RELEASE THE BRAKES:
PUSH THE LEVER UP

NOTE:

WHEN CHANGING THE DIRECTION
OF THE HANDLE. PLEASE ENSURE
THAT THE BRAKE ENDS ARE IN THE
SAME DIRECTION OF THE HANDLE.

PUT ON ALL BRAKES WHENEVER
YOU PARK THE STROLLER

11

HOW TO USE

HOW TO USE THE REVERSIBLE HANDLE:

LIFT BOTH LEVERS LOCATED ON THE
SIDES OF THE HANDLE UPWARDS.
THEN PUSH THE HANDLE IN THE
DIRECTION DESIRED.
THE HANDLE SHOULD SNAP INTO
A HOLDER WHERE IT WILL
LOCK INTO POSITION.
TEST THE HANDLE BEFORE
BEFORE USING.

HOLDER POSITIONS

FORWARD
FACING
POSITION

REAR
FACING
POSITION

12

HOW TO USE

HOW TO FOLD THE STROLLER:

FORWARD
FACING
POSITION

STEP 1.
MAKE SURE THE STROLLER
IS IN THE FORWARD FACING
POSITION BEFORE YOU
BEGIN TO FOLD

STEP 2.
ON THE HANDLE THERE ARE
2 LEVERS.

1.PRESS DOWN ON THE UPPER
LEVER AND

2. PUSH UP ON
THE LOWER LEVER
SIMULTANEOUSLY

1.

2.

STEP 3.
PUSH THE HANDLE FORWARD.
WITH THE SAME HAND YOU USED TO
DEPRESS THE LEVERS PUSH THE
SAFETY LOCK TOWARDS THE
FRAME WITH YOUR THUMB.
THEN CONTINUE TO PUSH THE
HANDLE FORWARD UNTIL IT
CLICKS AND IS LOCKED.

STEP 4.
MAKE SURE THAT THE LOCK IS
WORKING. GIVE IT A SLIGHT
TUG TO ENSURE IT IS LOCKED.

STEP 5.
YOU CAN CARRY THE STROLLER
WITH THE HANDLE ON THE SIDE.

13

HOW TO USE

HOW TO ADJUST THE BACKREST:

THIS STROLLER HAS 4 DIFFERENT POSITIONS FOR LAYBACK.
IN ORDER TO ADJUST THE STROLLER TO THE POSITION
REQUIRED YOU MUST LIFT THE REAR LEVER UP.
WHEN THE LEVER IS UP YOU CAN PUSH DOWN OR UP TO GET THE
DESIRED POSITION REQUIRED.
MAKE SURE CHILD IS NOT IN THE SEAT WHEN YOU ARE CHANGING
THE POSITION.

HOW TO USE ADJUST THE LEG REST:

THE LEG REST CAN BE
EITHER IN THE STRAIGHT
POSTION OR IN THE LOOSE
POSITION.
TO ADJUST THE LEG REST
YOU MUST PUSH THE LEVER
DOWN ON BOTH SIDES.
IF IN THE STRAIGHT POSTION
ENSURE YOU HEAR IT CLICK.

STRAIGHT POSITION

LOOSE POSITION

14

HOW TO USE

HOW TO USE THE 5-POINT HARNESS:

THIS STROLLER HAS BEEN DESIGNED WITH
A 5-POINT HARNESS FOR THE SAFETY OF
YOUR CHILD.

USE THIS HARNESS AT ALL TI ES

WARNING

CROTCH STRAP

WAIST STRAP

SHOULDER STRAPS

BUCKLE

CAREFULLY PLACE YOUR CHILD INTO THE
SEAT AND BRING THE SAFETY HARNESS
AROUND THE CHILDS WAIST AND OVER
THE CHILDS SHOULDERS.
PLACE THE CROTCH STRAP BETWEEN YOUR
CHILDS LEGS. TIGHTEN THE HARNESS TO BE
SNUG AROUND THE CHILDS WAIST AND OVER
ITS SHOULDERS.

ATTACH EACH OF THE SHOULDER STRAPS TO
THE CROTCH STRAP BUCKLE WITH EACH END.
REPEAT THIS FOR BOTH SHOULDER STRAPS.
ONCE EACH SHOULDER STRAP IS ATTACHED ON
THE WAIST BUCKLE INSERT THE WAIST STRAP
END TO THE BUCKLE. REPEAT FOR BOTH SIDES.
THEY SHOULD SNAP IN. (PULL ON THEM TO TEST)
TO RELEASE THE HARNESS SQUEEZE THE CENTRE
OF THE BUCKLES FOR BOTH WAIST STRAP ENDS.

ADJUST THE STRAP TO BE SNUG

YOUR CHILD SHOULD BE SECURELY HARNESSED AT
ALL TIMES AND SHOULD NEVER BE LEFT UNATTENDED

ATTACH EACH SHOULDER STRAP
END TO WAIST BUCKLE

ATTACH WAIST STRAP ENDS INTO THE
BUCKLE.

TO RELEASE THE HARNESS

HOW TO USE THE FOOT REST:

THE FOOT REST CAN BE USED EITHER UPWARDS (FOR
MORE SPACE FOR YOUR FEET), OR WITH THE FOOT REST
DOWN (TO REST YOUR FEET).
FOR UPWARDS JUST LIFT IT UP.
FOR DOWNWARDS PULL IT DOWN.

FOOT REST UPWARDS

FOOT REST DOWN WARDS

15

Head Office:

Love N Care Pty Ltd.

297-299 Canterbury Rd, Revesby

NSW 2212 Australia

Contact No: 02 9774 4655

Fax: [phone]

Email: [e-mail]

Website: www.lovencare.com.au

Contact Us

Brisbane

7-9 Eileen Street

Underwood QLD 4119 Australia

Contact No: 07 3290 4217

Fax: [phone]

Western Australia

5 Modal Crescent

Canning Vale WA 6155 Australia

Contact No: 08 9455 4972

Fax: [phone]

Ireland

DMG House

Deansgrange Industrial Estate

Deansgrange Co. Dublin

Phone: [phone]

Fax: [phone]

Website: www.lovencare.ie

16