Page 1
ASSEMBLY INSTRUCTIONS
BOOKCASE
ITEM# HHGZ006
P.1
Page 2
P.2
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are : wood
dowels , screws and bolts.
V. A Phillips head screwdriver is required for the assembly of this product .
Vl. Power tools should not be used to assemble this product .
Vll. Concealed hinges are three-way adjustable.
Horizontal
by screw adjustment
In-and-Out
by loosening the hinge-arm
mounting screw or via cam
adjustment
Vertical
Via slots in the mounting
plate or via cam adjustment
Door
Side panels
Side panels
Side panels
Door
Door
Page 3
P.3
Serious or fatal injuries can occur from furniture tip-over.
To help prevent furniture tip-over:
1/ It is recommended to use mounting hardware to secure furniture
to the wall. This may reduce but not eliminate the risk of furniture
tip-over.
2/ Do not allow children to climb on furniture.
3/ Keep remote controls, toys and other items that might attract
children off from this product.
4/ Do not allow children to step on furniture.
5/ Unless specifically designed to accommodate , do not set televisions
or other heavy objects on top of this product.
Caution:Do not allow door stay open when moving furniture.
WARNING
Page 4
Parts List
P.4
1
2
3
4
5
6
7
8
8
8
9
10
11
13
14
15
16
17
12
12
12
12
Page 5
Hardware List
A
36
pcs
M8*30(mm)
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
B
C
36
pcs
D
E
36
pcs
F
50
pcs
M3*14(mm)
36
pcs
Wooden dowel
Cam lock
Screw
Cam bolt
Sticker
Philips head screwdriver required for assembly
(not included)
G
H
I
2
pcs
2
pcs
Handle
Handle Screw
Ø4x18mm
J
M3.5*14mm
16
pcs
Screw
P.5
4
pcs
Hinge
16
pcs
Screw
Ø4x12
M6*32(mm)
Ø15*9.5
Ø30
K
Ø3.5*16
Ø3.5*30
Screw
Screw
plug
nylon strap
2
pcs
pcs
pcs
pcs
2
2
1
2
pcs
42*20*9MM
K1
K2
K3
K4
K5
Page 6
Step 1
P.6
12
12
12
12
7
H
H
H
H
7
Attach legs (12) to bottom panel (7) using screws (H).
Page 7
Screw cam bolts (B) into panel (2),Insert dowels (A) into panels (2);
Step 2
Step 3
P.7
B
B
B
B
B
B
7
7
B
B
B
B
B
B
A
A
2
2
Screw cam bolts (B) into panel (7);
Page 8
Screw cam bolts (B) into panel (4),Insert dowels (A) into panels (4);
Step 4
Step 5
P.8
B
B
B
B
B
B
A
A
3
3
B
B
A
A
4
4
4
4
B
B
Screw cam bolts (B) into panel (3),Insert dowels (A) into panels (3);
Page 9
Screw cam bolts (B) into panel (6),Insert dowels (A) into panels (6);
Step 6
Step 7
P.9
A
A
B
B
5
5
B
B
A
A
6
6
5
5
B
B
B
B
6
6
Screw cam bolts (B) into panel (5),Insert dowels (A) into panels (5);
Page 10
Screw cam bolts (B) into panel (1);
Step 8
Step 9
P.10
A
A
A
A
8
9
8
9
Insert dowels (A) into panels (8,9);
B
B
B
B
B
B
1
1
Page 11
Step 10
Step 11
P.11
8
8
4
4
8
4
8
8
8
4
5
c
c
c
c
c
Insert cam lock (C) into panel (8) tighter with a screwdriver;
Insert cam lock (C) into panel (8) tighten with a screwdriver;
1/ Attach panel (8) to panel (4) using cam bolts (B) and dowels (A) as guided ;
Insert cam lock (C) into panel (8) tighten with a screwdriver;
2/ Attach panel (5) to panel (8) using cam bolts (B) and dowels (A) as guided ;
21 3
21 3
Attach panel (8) to panel (4) using cam bolts (B) and dowels (A) as guided ;
Page 12
Step 12
P.12
8
c
8
8
8
6
5
21 3
Insert cam lock (C) into panel (8) tighten with a screwdriver;
1/ Attach panel (8) to panel (5) using cam bolts (B) and dowels (A) as guided ;
Insert cam lock (C) into panel (8) tighten with a screwdriver;
2/ Attach panel (6) to panel (8) using cam bolts (B) and dowels (A) as guided ;
4
8
8
5
4
Page 13
Step 13
P.13
6
9
c
3
2
4
5
6
c
c
c
c
c
c
c
c
Insert cam lock (C) into panel (4,5,6) tighten with a screwdriver;
2/ Join panels (2,3) together with panel (4,5,6) using cam bolts (B) and dowels (A) as guided ;
21 3
Insert cam lock (C) into panel (9) tighten with a screwdriver;
1/ Attach panel (9) to panel (6) using cam bolts (B) and dowels (A) as guided ;
8
8
5
4
8
Page 14
Step 14
P.14
c
cc
c
c
c
c
c
c
7
1
3
2
8
9
2
3
Insert cam lock (C) into panel (2,3,9) tighten with a screwdriver;
1/ Attach panel (7) to panels (2,3,9) using cam bolts (B) and dowels (A) as guided ;
21 3
Insert cam lock (C) into panel (2,3,8) tighten with a screwdriver;
2/ Attach panel (1) to panels (2,3,8) using cam bolts (B) and dowels (A) as guided ;
Page 15
Step 15
P.15
D
D
2/ Attach back panel (16) to the back of the console using screws (D). Back panel (16)
will overlap the back panels(17) as shown in insert above.
1/ Attach back panel (17) to the back of the console using screws (D).
17
16
17
Page 16
Step 16
P.16
D
D
15
14
1/ Attach back panel (15) to the back of the console using screws (D). Back panel (15)
will overlap the back panels(16) as shown in insert above.
2/ Attach back panel (14) to the back of the console using screws (D). Back panel (14)
will overlap the back panels(15) as shown in insert above.
16
15
Page 17
Step 17
P.17
D
13
1/ Attach back panel (13) to the back of the console using screws (D). Back panel (13)
will overlap the back panels(14) as shown in insert above.
14
Page 18
P.18
Step 18
F
Cover visible cam locks of the panels(2,3,8,9) with stickers (F) as desired
2
8
3
8
8
9
F
F
F
F
F
F
F
F
F
Page 19
Step 19
P.19
I
J
E
G
I
J
10
11
11
10
10
11
1/ Attach hinges (E) to doors (10,11) using screws (G).Attach handles (I) to doors
(10,11) using screws (J)
2/ Attach doors (10,11) to the console using screws (G) at hinges (E). See page 2 for
instructions on how to adjust hinges so doors align with console as desired.
E
G
E
G
E
G
E
G
Page 20
Step 20
Final Assembly
P.20
WALL
WALL
K4
K1
K3
K5
Further (K1) to panel(1) using screws(K2).
K1
K2
K1
K2
To tighten this bookcase, please
pull the pointed tip of the cable tie
through the case and past the
ratchet untill they can't be pulled
backwards.
Loading...