Lotus ILM3510 Instruction Manual
CALENDAR
ILM3510
INSTRUCTION MANUAL
3
ILM3510
MANUAL DE INSTRUCCIONES
CRONÓGRAFO
Setting the Date
_______________________________________________________________________________________________________________________________________
4
Setting the normal Time
_______________________________________________________________________________________________________________________
5
Chronograph
______________________________________________________________________________________________________________________________________________
6
Use as Alarm
____________________________________________________________________________________________________________________________________________
11
Use as Counter
_______________________________________________________________________________________________________________________________________
14
Use as Timer
____________________________________________________________________________________________________________________________________________
15
ILM3510 ILM3510
4
5
SETTING THE DATE SETTING THE NORMAL TIME
1. Be sure to Alarm switch OFF and pull the crown to the 1st Click Position.
2. Turn the crown clockwise to set the date.
3. After the date has been set, push the crown back to the normal position.
*
The date will be changed in the period from around 12:00 a.m. to around 3:30a.m.
Pay attention since the date will not change when the setting of the alarm is checked
and alarm time is set in this time zone.
Pull the crown to the 2nd Click Position and turn the crown clockwise to set the
time.
1. Second: lf the crown is pulled out to the 2nd Click Position, the second hand will
instantaneously move to the O position. When the second hand stands at between
O and 29 seconds, the minute display will remain as befare. When the second
hand stands at between 30 and 59 seconds, the minute display will increase by
1 minute.
*
In case the second hand does
not move to the O position even
if the crown is pulled out to
the 2nd Click Position, set the
second hand to the O position
by pushing the button A with the
crown pulling out to the 2nd Click
position. (A push of the button A
m oves the second hand by one
second scale.)
Loading...