Losi LOSB9878 User Manual

+ Jumper

- Adapter

2mm Bullet

Created 11/10 31406© Horizon Hobby, Inc.

- Jumper

- ESC Power Lead

Vehicle Con gurations

Vehicle Con guration using Adapter Setup

+ Jumper

When using the Adapter Setup with a high

current connector, install the LiPo battery as

shown in the image below.

ESC

2mm Bullet

- Adapter

Speed

Battery to

Power Lead

- Jumper

Lead

+ ESC Power

+ Jumper

Controller

Vehicle Con guration Using

+ Adapter

ESC

Note: Losi EC3 Connectors are used for the adapter

4mm Bullet Plugs

For use in vehicle using

adapter with plug, install the

LiPo battery as shown in the

image above.

- Jumper

and speed controller power leads.

Included Devices

Adapter Setup Jumper Cable

Charging Con guration

For LiPo balance charging, plug in the battery as shown

Plug

XH Balance

separately

pictured sold

+ Adapter

ESCs and charger

Connectors are used for the adapter

TM

and charger power leads.

Charger

in the image above.

Battery to

Power Leads

Note: Losi EC3

Note: Be sure to install all plugs, adapters, and jumper cables using the correct polarity. Failure to do so may cause damage to the LiPo battery, speed controller, or charg-

ing devices. Installing any plugs, adapters, or jumper cables incorrectly will void service warranties.