Losi LOSA1757 User Manual

LOSA

1757

STEP A-01

A1757

Front Outer Brace

A1756

Adjustment Cam

Adjustable Hinge Pin Brace Install

A6500

Hinge Pin

A4427

Front Bulkhead

A1757

Front Inner Brace

Up Position

Decrease Kick-Up

Down Position

Increase Kick-Up

Up Position

Increase Kick-Up

Down Position

Decrease Kick-Up

Front Kick-Up Angle Adjustment

Outer Front Brace Inner Front Brace

Insert

Position

Insert

Number

Insert

Position

Insert

Number

Total

Kick-Up

Up 1° Down 1° +2°

Up 0.5° Down 0.5° +1°

Middle 0° Middle 0° 0°

Down 0.5° Up 0.5° -1°

Down 1° Up 1° -2°

Remove the Bulkhead from the chassis.

•

Remove the existing Hinge Pin Braces and plastic covers.

•

Select the desired Adjustment Cam and press it into the new Adjustable Hinge Pin Braces.

•

*Note the position of the number on the outside of the Cam. Always install the same number Cam in the same orientation on each side

•

of the car.

Install the Inner Adjustable Hinge Pin Brace re-using the mounting hardware.

•

Align the Arms and Hinge Pins with the Adjustment Cam.

•

Install the Outer Adjustable Hinge Pin Brace re-using the existing hardware.

•

Re-attach the bulkhead to the chassis.

•

Check the suspension to ensure it moves freely and does not bind.

•

800-0420