Losi LOSA1755 User Manual

LOSA

1755

STEP A-01

A1755

Rear Inner Brace

A1756

Adjustment Cam

Adjustable Hinge Pin Brace Install

A6500

Hinge Pin

A4450

Rear Bulkhead

A1755

Rear Outer Brace

Outside Position

Increase Toe-In

Inside Position

Decrease Toe-In

Rear Toe-In Adjustment

Insert

Position

Insert

Number

Total

Toe-In

Inside 1° 2°

Inside 0.5° 2.5°

Middle 0 3°

Outside 0.5° 3.5°

Outside 1° 4°

Remove the Bulkhead from the chassis.

•

Remove the existing Hinge Pin Braces and plastic covers.

•

Select the desired Adjustment Cam and press it into the new Adjustable Hinge Pin Braces.

•

*Note the position of the number on the outside of the Cam. Always install the same number Cam in the same orientation on each side

•

Up Position

Increase Anti-Squat

Down Position

Decrease Anti-Squat

Rear Anti-Squat Adjustment

Insert

Position

Insert

Number

Total

Anti-Squat

Up 1° 3°

Up 0.5° 2.5°

Middle 0 2°

Down 0.5° 1.5°

Down 1° 1°

of the car.

Install the Inner Adjustable Hinge Pin Brace re-using the mounting hardware.

•

Align the Arms and Hinge Pins with the Adjustment Cam.

•

Install the Outer Adjustable Hinge Pin Brace re-using the existing hardware.

•

Re-attach the bulkhead to the chassis.

•

Check the suspension to ensure it moves freely and does not bind.

•

800-0330