Bluetooth Wireless Headset
Contents
About your LORO WAVE…………………………………………………2
What’s in your box ………………………………………………………2
User ManualUser Manual
Model : LORO WAVEModel : LORO WAVE
Headset composition……………………………………………………3
Specification………………………………………………………………4
Charge your headset…………………………………………………….5
Turn on/off your headset……………………………………………….5
Pair i
t with your phone …………………………………………………
6
Pair it with your Audio Gateway (Dongle) ……………………….…8
Figures / What the lights mean
………………………………………
7
How toHow to……....
Make a call ………………………………………………………………9
Answer a call/ End a call ……………………………………………..9
Reject a call / Volume control …………………………………..….10
Thank you for purchasing the LORO WAVE Bluetooth Headset. We hope
you enjoy it! This instruction manual will get you started and ready to
make the most of your headset.
Troubleshooting & FAQ ……………………………………………...11
Taking care of your headset ………………………………………..12
Warranty ……………………………………………………………12,13
1
! Remember, driving comes first, not the call !
Using a mobile phone while driving can distract you and increase the
likelihood of an accident. If driving conditions demand it (such as bad
weather, high traffic density, presence of children in the car, difficult
road conditions), pull off the road and park before making or answering
LORO WAVE Headset composition
1
About your LORO WAVE headset……..
calls. Also, try to keep conversations short and do not make notes or
Read documents.
2
6
LORO WAVE What’s in your box?
3
5
A/C Adaptor
USB Adaptor
4
1
LED Light
Headset
Headset Holder
Ear-ring 1,2
Charging socket
Microphone
Power button (Answer/end, On/Off)
Volume up(+), volume down(-)
2
3
4
5
Attaching Clip
Ear Hook
User Manual
S
p
eaker
6
32
LORO WAVE Specificati
on
LORO WAVE Headset chargin
g
Bluetooth Spec. Version 2.0
Your LORO WAVE comes with a built- in rechargeable battery.
Please make sure that your headset is fully charged before you
start using it. Please allow at least approx. 2 ~ 3 hours for the
+ Use the AC adaptor to charge from a power socket or USB
charging cable.
+ When your headset is charging, the LED light on your headset
Bluetooth
Profiles
Bluetooth Headset
Bluetooth Hands-free
Frequency 2.402 GHz ~ 2.480GHz
first time charging.
ygg,gy
shows steady red light.
+ When your headset battery is fully charged, the red LED light will
go off
Operating Range
Up to 10m
Temperature of
use
-20 ~ 55 ℃
Dimension
18(W) * 60(L) * 8(D)mm
Turn your headset ON/OFF
Weight
9g
Stand by time Up to 100 hours
Talk time Up to 5 hours
+ Turn on
Press and hold the answer/end button for about 6 seconds, when
red LED light flashes, your headset is on.
Battery charging
time
Approx. 2.5 hours
Battery type 3.7v/100mA Li-ion Polymer
+ Turn off
Press and hold the answer/end button for about 5 seconds, when
red LED light flashes, your headset is off.
☞ Talk time & stand by time can be reduced due to
environmental circumstances.
☞ When your headset battery is low, the LED light will flashes RED
every 2 ~ 3 seconds.
54
LORO WAVE
…..
Pair it with your phone
☞ Before you use your LORO WAVE headset, you need to
pair it with your mobile phone.
LORO WAVE
…
..Figures
1 – Press and hold answer/end button on your headset for about
9 seconds, when the LED light flashes Blue & Red alternately, y our
headset is locating any Bluetooth devices around it. In this case
your mobile phone.
2 – Please refer to your Bluetooth mobile phone manual for registration
about Bluetooth device with your phone. i.e. hands-free/headset.
3–When your headset is located and register into your phone, your
phone display will show the headset name “ LORO WAVE”
4 – In order to complete the registration process, please enter the
“
“
What the lights mean
pass code
0000 into your mobile phone using your phone keypad
.
Your phone will confirm when paring is complete. In case of
unsuccessful pairing, please repeat steps 1 ~ 4 .
①Flashing Blue light…………Flashing 3 times: Stand-by mode
② Flashing Blue light…………Flashing every 5 seconds: active on call
③ Solid Red light…………….. Charging
When you completed paring, LED light flashes Blue fo r every 5
Seconds for three times.
④ Solid Red light off…………Fully charged
⑤ Flashing Blue/Red alternately……In pairing mode
76
LORO WAVE & LORO Dongle (Audio gat
eway) pairing.
(Option)
☞ For non-Bluetooth mobile phone, you may use your headset
with Dongle by pairing , following steps.
LORO WAVE….. Make a call
1. Tap the answer/end button on your headset to display last
called number on your mobile phone.
1 – Press and hold answer/end button on your headset for about
9 seconds, when the LED light flashes Blue & Red alternately, y our
headset is location any Bluetooth devices around it. In this case
your Donlge (Audio gateway).
2. Once you found specific number, tap the answer/end button
again to make a call.
(Dependent on your phone supporting this feature)
2 – Please make sure your dongle is OFF, press and hold the power
button for about 5 seconds until LED light flashes Blue and RED
alternately. Now your headset & Dongle are locating each others.
3. When you make a call from your mobile phone using keypad and
tap the answer/end button on your headset.
(Subject to your phone setting)
alternately. Now your headset & ongle are locating each others.
Release the power button, once they located, paring will be
completed automatically. For more detail, please refer to your
Dongle user manual.
Answer a call
LORO WAVE Answer a call / End a call
When you complete paring, LED light for dongle flashes Blue for
every 5 seconds.
’
Tap
the answer/end button on your headset to answer a call
( While your are wearing your headset, you can hear ring tone
thru your headset when you receive a call. Dependent on your
phone supporting this feature.)
! Every Audio gateway (Dongle) products
specifications & pairing steps
may vary. Please refer to your Dongle user g uide for more
detail information.
End a call
Tap the answer/end button on your headset to end an active call.
98
Troubleshooting & FAQ
LORO WAVE
…
Reject a call
*** Dependent on your phone supporting this feature
Press the answer/end button when the phone rings to reject an
I hear cracklin g noises
For the best audio quality, always wear your headset on the same
side of the body as your mobile phone.
LORO WAVE….Adjust sound and volume
pgj
incoming call. Depending on your phone settings, the person who
called you will either be forwarded to your voice mail or hear a busy
signal.
I cannot hear anything in my headset
* Increase the volume on the headset
* Ensure that the headset is paired with the phone
* Make sure that the phone is connected to the headset-if it does
Press the volume up or down (+ or - ) to adjust the volume.
You will not hear any beeping sound while you are adjusting the
volume. Once you reach maximum or minimum volume then you
not connect either from the phone’s Bluetooth menu of by
tapping the answer/end button, follow the pairing procedure.
I have trouble pa iring LORO WAVE wi th my phone
will hear long beeping sound.
LORO WAVE….it is easy to operate
1. You may have deleted your headset pairing in your mobile
phone. Follow the pairing procedure.
2. You can pair your LORO WAVE with different phones or
Bluetooth devices. If your headset is connected to another
ph
one or other Bluetooth devices, disconnect the LORO
WAV
E
from the previously used phone using the phone set up menu.
3. There is also the possibility that the LORO WAVE is searching
for a device to connect to. Wait about 30 seconds and try again.
The LORO WAVE is easy to operate. The answer/end button on the
headset performs different functions depending on how long you
press it.
Instruction: Duration of press:
4. Check the phone screen to ensure that the LORO WAVE is not
awaiting a response from your mobile phone set up menu.
I can not us e Reject ca ll, Call on hold, Redial or Voice di aling
These functions are dependent on your phone supporting them.
’
Tap Press briefly
Press Approx: 1 second
Press and hold Approx: 5 seconds
1110
please check your phone s manual for further details
.
LORO WAVE
….
Taking care of your headset
For optimal performan ce, we ar th e LORO WAVE and your mob ile phone
on the same side of your body or within line of s ight. In general, you
will get better performance when there are no obstructions between
y
our headset and your mobile phone.
• Any implied warranty on BOYOUNG TECH TECHNOLOGY &
MARKETING, Inc. products is limited to one year from the date
of purchase on all parts, including any cords and connectors.
• Speciifically exempt from any warranty are limited-life
yyp
1. Always store the LORO WAVE with power off and safely
protected.
2. Avoid storage at high temperatures (above 60 deg.C/134 deg.F)
consumable components subject to normal wear and tear, such
as microphone windscreens, ear cushions, decorative finishes,
batteries, and other accessories.
• BOYOUNG TECH TECHNOLOGY & MARKETING, Inc. is not liable
for any incidental or consequential damages arising from the use
or misuse of any BOYOUNG TECH TECHNOLOGY & MARKETING,
-such as in a hot vehicle or in direct sunlight. (Storage at high
temperatures can degrade performance and reduce battery life.)
3. Do not expose the headset or any of its supplied parts to rain or
other liquids.
Warranty
I
nc. product.
• This warranty gives you specific rights and you may have other
rights which vary from area to area.
• Unless otherwise instructed in the Use Manual, the user may not,
under any circumstances, attempt to perform service,
BOYOUNG TECH TECHNOLOGY & MARKETING, Inc. warrants this
product against all
Defects in material and workmanship for a period of one year from the
Date or original purchase. The conditions of this warranty and our
adjustments or repairs on this unit, whether in or out of warranty
.
It must be returned to the purchase point, factory or authorized
service agency for all such work.
• BOYOUNG TECH TECHNOLOGY & MARKETING, Inc. will not
assume any responsibility for any loss or damage incurred in
shipping. Any repair work on BOYOUNG TECH TECHNOLOGY &
Date or original purchase. The conditions of this warranty and our
Responsibilities under this warranty are as follows:
• The warranty is limited to the original purchase.
• A copy of your receipt or other proof of purchase is required.
MARKETING, I
nc. products by unauthorized
third parti
es voids
any warranty.
• The warranty is void if the serial number, date code label or
product label is removed, or if the product has been subject to
physical abuse, improper installation, modification, or repair by
unauthorized third parties.
• The responsibility of BOYOUNG TECH TECHNOLOGY &
1312
MARKETING, I
nc. products shall be limited to the repair or
replacement of the product as its sole discretion.
Loading...