LOREX Technology SHS-2SA User Manual
4. Switcher Specifications
H O M E & B U S I N E S S S E C U R I T Y
Switcher Specifications:
Channels 2
Scan Time 1~30 Seconds
Operating Voltage
Camera Input
AV Output
Power Supply
Operating Humidity
Operating Temp
Please refer to the Camera Spec Sheets posted
online at http://www.lorexcctv.com
details on individual Camera Specifications.
12V DC 500mA
2 DIN
1 DIN
DC 12V ± 10% 500mA
90% HM Max.
14°F ~ 122°F
(-10
°~ 50°C)
for further
It’s all on the web
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
2 CHANNEL MINI
SWITCHER BOX
WITH 2 COLOR CAMERAS
Model: SHS-2SA
Dimensions:
WARNING – REGULATED 12V DC 500mA power supply
REQUIRED for use with this Switcher. Use of a non-regulated,
non-conforming power supply can damage this product and will
void the warranty.
VISIT
www.lorexcctv.com
Quick Set-up Guide
LOREX Technology Inc.
Copyright © 2007 LOREX Technology Inc. As our
products are subject to continuous improvement,
LOREX and its subsidiaries reserve the right to modify product design, specifications and prices, without
notice and without incurring any obligation. E&OE
1. Package Contents 2. Switcher Controls 3. Camera Connections
1. Connect the 65ft DIN Extension cable to the
Switcher. Run the cable as desired, and connect
1 x Mini Switcher Box
the other end of the 65ft Extension Cable to the
DIN Camera (see Setup Diagram below).
NOTE: Cameras with 6 Pin DIN
connections draw power from the
Switcher. Additional power adaptors
are not needed for these cameras.
1 x Power Adaptor
1 x AV Cable
1 x Velcro Adhesive
Strip
2 x DIN Cameras*
2 x Camera Stands
2 x 65’ DIN Extension
Cables
* Cameras may not be exactly as shown.
Features:
• Easily connects to any TV, VCR or
Monitor
• Compact design
• Easy mounting with Velcro strip
(included)
1
1. SCAN TIME SETTING - Turn to adjust the Scan
Time between cameras (when in SCAN View Mode)
from 1~30 Seconds.
2. CHANNEL SELECT - Move the switch to change
the onscreen view to CH1, CH2 or SCAN View Mode.
3. STATUS INDICATOR LEDs - The Red LED light
indicates the state of the switcher: CH1, CH2 or
SCAN Mode.
4. DC POWER PORT - Connection port for the Power
Adaptor.
5. CH1~CH2 DIN PORTS - Receives the audio and
video signal from the Cameras.
6. A/V OUT DIN PORT - Sends the outgoing video/
audio signal to a TV or VCR.
2 3
2. Attach the camera to the supplied stand. Mount
the camera stand to the desired mounting surface
NOTE: Confirm that the arrows on the DIN
Extension cable are aligned with the Camera
Cable and Observation system ports when
connecting the cable. If the pins in the DIN
Cable are bent, the Camera will NOT
function
3. Connect the DIN end of the A/V Cable to the
switcher. Connect the RCA end to the
corresponding color ports on the TV or VCR:
•Yellow Cable: RCA Video
•White Cable: RCA Audio
4. Connect the Power Adapter to the switcher.
Setup Diagram:
Note:
Test the cameras prior to selecting a permanent
mounting location by temporarily connecting the
Cameras and Cables to the switcher.
4
5 6
* Cameras may not be exactly as shown.
Loading...