LOREX Technology SG7555RB User Manual

4. Camera Specifications

H O M E & B U S I N E S S S E C U R I T Y

Image Device 1/4” Color Image Sensor

Effective Pixels 656H x 492V

Scanning System

Resolution

AES Shutter Speed

S/N Ratio

Sync. System

Min. Illumination

IR Night Vision 24 IR LED / 850nm / 50’

Video Output

White Balance

Termination 6 Pin DIN

Lens

Viewing Angle H: 59°; V:44°; D: 73°

2:1 Interlace
NTSC: 525 Lines

Horizontal 480 TV lines

1/60 ~ 1/50,000 sec.

More than 48dB (AGC off)

Internal

3 LUX @F1.2 (no LED)
0 LUX (with LED)

(15m)

1.0 Vp-p (75 ohms)

AWB

Fixed Lens (3.6mm)

It’s all on the web

Product Information

User Manuals

Quick Start Guides

Specification Sheets

Software Upgrades

Firmware Upgrades

HIGH RESOLUTION

WEATHERPROOF COLOR CAMERA

WITH NIGHT VISION AND AUDIO

Model: SG7555RB Series

Refer to the Product Package or online

Spec Sheet for specific product

configuration.

FOV (Diagonal) 70 Degrees

Power Requirement

Power Consumption

Operating Temp

Operating Humidity

Weight (With Stand) 0.81lb / 0.36 kg

DC 12V ± 10%

With IR: Max 330mA
W/o IR: Max 90mA

14°F ~ 122°F
(-10

°~ 50°C)

Within 90% RH

Dimensions:

VISIT

www.lorexcctv.com

LOREX Technology Inc.
Copyright © 2008 LOREX Technology Inc. As our
products are subject to continuous improvement,
LOREX and its subsidiaries reserve the right to mod­ify product design, specifications and prices, without
notice and without incurring any obligation. E&OE

Quick Set-up Guide

English Revision 1.0

1. Package Contents 2. Installing the Camera 3. Camera Diagram

1 x Camera
1 x Camera Stand

1 x 100’ (30m) DIN
Extension Cable

*
*

*

* Included with the SG7555RB Single Pack only. This

provides universal compatibility to industry standard
BNC and RCA connectors.

WARNING - Regulated 12V DC 500mA power supply is REQUIRED for

use with this camera, when connected to a BNC system. Use of a non­regulated, non-conforming power supply can damage this product and
will void the warranty.

Features:

• High Resolution Image Sensor

• 24 High Intensity IR LEDs provides effective night
vision range up to 50 ft. (15 m)**

• Day / Night mode: Picture automatically switches to
B&W delivering better clarity in low light conditions

• Built in microphone provides one-way audio from the
camera to the system

• Weatherproof*** Cameras ideal for indoor and outdoor
applications (IP66)

• All-in-one cable providing Video, Audio & Power, plugs
directly to the DIN ports of the system and eliminates
the need for a separate power adaptor

• 100 ft.(30m) extension cable included per camera

• Ceiling or Wall Mountable Camera with versatile stand
provides flexible mounting options

NOTE - This Camera includes a Mechanical Auto IR Cut Filter.
When the Camera changes between Day/Night lighting, an audible
clicking noise may be heard from the camera. This clicking is nor­mal, and indicates the Camera filter is working.

** Night Vision Range up to 50ft. (15m) in ideal conditions. Objects
at or beyond this range may be partially or completely obscured,
depending on the camera application.
*** Not recommended for submersion in water.

1 x DIN to BNC Coupler

1 x BNC to RCA Adaptor

1 x Power Adaptor

Note: Test the cameras prior to selecting a permanent
mounting location by temporarily connecting the
Cameras and Cables to the System.

1. Mount the camera stand to the desired mounting
surface. Attach the camera to the supplied stand.

NOTE: The camera can be mounted to either a wall or
a ceiling.

2. Aim the camera. Remove the protective film from
the lens.

Lift the plastic tab on
the lower edge of
the camera to
remove the
protective film.

3. Connect the Extension cable to the camera.
Connect the other end of the Extension Cable to
the System.

Note: Confirm that the arrows
on the DIN Extension cable
are aligned with the Camera
Cable and System ports when
connecting the cable. If the
pins in the DIN Cable are bent,
the Camera will NOT function

Infra-Red

LEDs

Camera

Lens

Adjustable

Stand

DIN

Connector

Micro­phone

DIN System Connection Diagram:

Cameras with 6 Pin DIN connections draw
power from the System. Additional power
adaptors are not needed for these cameras,
when connecting to DIN ports.

DIN to BNC System Connection Diagram:

* To connect to a TV use the included BNC to RCA Adaptor.