LOREX Technology SG7555BP User Manual

4. Camera Specifications

H O M E & B U S I N E S S S E C U R I T Y

Image Device 1/4” Color Image Sensor

Effective Pixels 512H x 582V

Scanning System

Resolution

AES Shutter Speed

S/N Ratio

Sync. System

Min. Illumination

IR Night Vision 24 IR LED / 850nm / 50’

Video Output

White Balance

Termination 6 Pin DIN

Lens

Viewing Angle H: 59°; V:44°; D: 73°

2:1 Interlace
PAL: 625 Lines

Horizontal 420 TV lines

1/50 ~ 1/100,000 sec.

More than 48dB (AGC off)

Internal

0.05 LUX without
IR LED

(15m)

1.0 Vp-p (75 ohms)

AWB

Fixed Lens (3.6mm)

It’s all on the web

Product Information

User Manuals

Quick Start Guides

Specification Sheets

Software Upgrades

Firmware Upgrades

WEATHERPROOF

COLOR CAMERA

WITH NIGHT VISION AND AUDIO

Model:SG7555BP

Refer to the Product Package or online

Spec Sheet for specific product

configuration.

FOV (Diagonal) 73 Degrees

Power Requirement

Power Consumption

Operating Temp

Operating Humidity

Weight (With Stand) 0.81lb / 0.36 kg

DC 12V ± 10%

With IR: Max 350mA
W/o IR: Max 100mA

14°F ~ 122°F

°~ 50°C)

(-10

Within 90% RH

Dimensions:

VISIT

www.lorexcctv.com

LOREX Technology Inc.
Copyright © 2008 LOREX Technology Inc. As our
products are subject to continuous improvement,
LOREX and its subsidiaries reserve the right to mod­ify product design, specifications and prices, without
notice and without incurring any obligation. E&OE

Quick Set-up Guide

English Revision 1.0

1. Package Contents 2. Installing the Camera 3. Camera Diagram

1 x Color Day/Night
Camera
1 x Camera Stand

1 x 100’ (30m) DIN
Extension Cable

1 x DIN to BNC Coupler

*

1 x Power Adaptor
1 x BNC to RCA Adaptor

* DIN to BNC Coupler and Power Adaptor are included with
the SG7555BP Single Pack only. This provides universal
compatibility to industry standard BNC connectors.

Note: Test the cameras prior to selecting a permanent
mounting location by temporarily connecting the
Cameras and Cables to the System.

1. Mount the camera stand to the desired mounting
surface. Attach the camera to the supplied stand.

2. Aim the camera. Remove the protective film from
the lens.

Lift the plastic tab on
the lower edge of
the camera to
remove the
protective film.

Infra-Red

LEDs

Camera

Lens

Adjustable

Stand

DIN Input

Cable

Micro­phone

DIN System Connection Diagram:

Cameras with 6 Pin DIN connections draw
power from the Observation System or DVR.
Additional power adapters are not needed for
these cameras.

Features:

• High Resolution Color Image Sensor

• 24 Hi Intensity IR LEDs provides effective night vision
range over 50 ft. (15 m)**

• Day / Night mode: Picture automatically switches to
B&W delivering better clarity in low light conditions

• Weatherproof*** Cameras ideal for Outdoor and indoor
applications (IP66)

• Plug and Play Cameras: all-in-one camera cable
(providing Video, Audio & Power) plugs directly to the
monitor and eliminates the need for a separate power
adaptor

• 100 ft.(30m) extension cable included per camera

• Ceiling or Wall Mountable Cameras with versatile stand
provides flexible mounting options

** Night Vision Range up to 50ft. (15m) in ideal conditions. Objects
at or beyond this range may be partially or completely obscured,
depending on the camera application.
*** Not recommended for submersion in water.

3. Connect the Extension cable to the camera.
Connect the other end of the Extension Cable to
the Observation System or DVR.

DIN to BNC System Connection Diagram:

Note: Confirm that the arrows on the DIN Extension cable

are aligned with the Camera
Cable and System ports when
connecting the cable. If the
pins in the DIN Cable are bent,
the Camera will NOT function