LOREX Technology SG7550 User Manual

4. Camera Specifications
H O M E & B U S I N E S S S E C U R I T Y
Specifications:
Image Sensor 1/4” Advanced Color
Video Format / Pixels
Horizontal Resolution
Sync. & Scan. Systems
S/N Ratio
Iris & Shutter Speed AES; 1/60 ~ 1/50,000 sec.
Minimum Illumination
Video Output
Lens / Lens Mount
FOV (diagonal)
Termination
IR / Night Vision Range
Power Requirement 12V DC ±10%
NTSC: 656(H) x 492 (V)
480 TVL
Internal; 2:1 Internlace
> 48dB
0.6 LUX @ F1.2 (IR Off) 0 LUX (IR LEDs ON)
Comp. 1.0 Vpp @ 75ohm
5.0mm F2.8/ Fixed
50 Degree
Video: BNC Female Power: Barrel Female
30IRLED/850nm/75’(23m)
It’s all on the web
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
HIGH RESOLUTION INDOOR/
OUTDOOR COLOR CAMERA
with Night Vision
Model: SG7550 Series
Power Consumption
Operating Temp.
Weight (with stand) 10.4 oz / 294.8 g
Dimensions (H x D x Dia)
220mA or 3W max
14°F ~ 122°F (-10°C ~ 50°C)
3.9” x 2.7” x 3.2” 100mm x 68mm x 80mm
Dimensions:
VISIT
www.lorexcctv.com
LOREX Technology Inc. Copyright © 2008 LOREX Technology Inc. As our products are subject to continuous improvement, LOREX and its subsidiaries reserve the right to mod­ify product design, specifications and prices, without notice and without incurring any obligation. E&OE
Quick Set-up Guide
English Version 2.0
1. Package Contents 2. Installing the Video Camera
3. Connecting the Camera
1 x High Resolution Indoor / Outdoor Color Camera with Night Vision
1 x Mounting Bracket / Stand
1 x 60 ft. extension cable 1 x BNC to RCA Adaptors
1 x AC Power Adaptor
NOTE - This camera does not support Audio. For a full line of audio
enabled cameras, visit us on the web at http://www.lorexcctv.com
1. Attach the camera to the supplied stand at either of the two connection points.
2. Mount the camera stand to the desired mounting surface
The mounting stand is designed to permanently mount the camera to a surface.
3. Connect the 60ft Extension cable to the camera:
4. Connect the BNC end of the 60ft Extension Cable to the DVR / Observation System or to a TV/VCR.
Connect the BNC to RCA Adaptor as needed to allow for proper connectivity.
5. Connect the A/C Power Adaptor to the 60ft Exten­sion cable (Black connector). Plug the Power adaptor to a wall outlet
WARNING - REGULATED 12V DC 500mA power supply is RE-
QUIRED for use with this camera. Use of a non-regulated, non-con-
forming power supply can damage this product and will void the
warranty.
Features:
Advanced Image Sensor (AIS) provides High Resolution image (480 TV Lines)
Auto Mechanical IR Cut Filter removal function ensures accurate color reproduction
Durable Weatherproof Indoor/Outdoor camera*
Enhanced Night Vision Capability - up to 75 ft **
Easily connects to any TV, VCR or DVR
Ceiling and wall mounting bracket included
* Not recommended for submersion in water ** IR Illumination range of 75 ft. (23m) under ideal conditions. Objects at or beyond this range may be partially or completely obscured, depending on the camera application.
BNC (VIDEO)
(Yellow Connector)
VIDEO INPUT
CONNECTIONS:
Connect the BNC cable to
the video input of the
monitor, and connect the
power adaptor to an outlet.
POWER
(Black Connector)
CAMERA
CONNECTIONS:
Connect the BNC and
Power cables to the
Camera
NOTE - This Camera includes a Mechanical Auto IR Cut Filter. When
the camera changes between Day/Night Lighting, an audible clicking
noise may be heard coming from the camera. This clicking is normal,
and indicates that the Camera filter is working.
Setup Diagram:
Loading...