LOREX Technology SG7525 User Manual
4. Camera Specifications
Specifications:
Image Sensor 1/3” Color CCD
Video Format / Pixels
Horizontal Resolution
Sync. & Scan. Systems
S/N Ratio
Iris & Shutter Speed AES; NTSC 1/60~1/100,000
Minimum Illumination
Video Output
Lens / Lens Mount
FOV (diagonal)
Termination
IR / Night Vision Range
NTSC: 512(H) x 492 (V)
PAL: 512 (H) x 582 (V)
420 TVL
Internal
NTSC 525 lines 2:1 Interlace
PAL 625 lines 2:1 interlace
More than 48dB @ AGC off
AES; PAL 1/50~1/100,000
0.1 LUX / F2.0 (w/o IR LED)
Comp. 1.0Vpp @ 75 ohm
4.3mm Fixed
75 Degrees
Video: BNC Female
Power: Barrel Female
18 LED 850nm / 12m (40ft)
It’s all on the web
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
COLOR DAY/NIGHT CCD
WEATHERPROOF
CAMERA
Model: SG7525 Series
Power Source 12V DC ± 10%
Power Consumption
Operating Temp. 14°F ~ 122°F
Weight 560g / 19.8 oz.
250 mA Max 12V DC
(-10°C ~ 50°C)
Dimensions:
2.36”
60mm
5.52”
140mm
6.3”
160mm
VISIT
www.lorexcctv.com
Quick Set-up Guide
LOREX Technology Inc.
Copyright © 2007 LOREX Technology Inc. As our
products are subject to continuous improvement,
LOREX and its subsidiaries reserve the right to modify product design, specifications and prices, without
notice and without incurring any obligation. E&OE
1. Package Contents
2. Installing the Camera 3. Connecting the Camera
1 x Color Bullet Camera
with Stand
1 x 60 ft. Extension Cable
1 x Quad 4-in-1 AC Power
Adaptor -OR-
OR
1 x Single AC Power
Adaptor *
* Single power adaptor provided with Single Camera pack; Quad 4-in-1
power adaptor provided with a 4-pack Camera Bundle, providing power to
all 4 cameras at once.
NOTE: Test the Cameras and Cables prior to selecting
a permanent mounting location by temporarily
connecting them to the system.
1. Attach the camera to the supplied stand.
Mount the camera stand to the desired
mounting surface
2. Connect the 60ft Extension cable:
BNC (VIDEO)
(Yellow Connector)
POWER
(Black Connector)
Setup Diagrams:
Single A/C Adaptor
Quad 4-in-1 A/C Adaptor
WARNING - The REGULATED power supply included with this product
is REQUIRED for use with this camera. Use of a non-regulated, non-
conforming power supply can damage this product and will void the
warranty.
Features:
• 1/3” advanced CCD image sensor provides
superior image quality
• Excellent low light sensitivity with 18 infrared LED
illuminators*
• Color video in standard lighting, automatically
changes to B&W video in low light conditions
• Professional Grade Weatherproof** camera ideal
for Indoor / Outdoor applications (IP66 rated).
* IR illumination range up to 40 ft (12M) under ideal conditions.
Objects at or beyond this range may be partially or completely
obscured, depending on the camera application.
** Not for use in direct exposure to water, rain or snow
A
Connect to
Monitor and Power
Adaptor
A. Connect the Barrel Power connector to a power adaptor.
B. Connect the BNC connector to a monitor
C. Connect the Male Power connector to the Camera.
D. Connect the BNC connector to the Camera.
B
C
Connect to
Camera
D
3. Connect the Power Adaptor to the wall
outlet.
Connecting a BNC to RCA Adaptor:
Connect a BNC to RCA Adaptor as needed to
allow for proper connectivity to a TV or VCR (sold
separately).
Loading...