LOREX Technology SG7221 User Manual
4. Camera Specifications
BUSINESS AND HOME
Specifications:
Image Sensor
Effective Pixels
Scanning System
Resolution
Video Output
Lens
White Balance
AES
Sync. System
Min. Illumination
Viewing Angle 70 Degree
Power Consumption
Power Supply
Operating Humidity
Operating Temp
1/4” Color CCD Image
H: 512, V: 492
2:1 Interlace NTSC
420 TV Lines
1.0 Vpp @ 75 OHM
3.6mm Fixed F 2.0
AWB
On 1/60~1/ 15,000Sec
2:1 Interlace NTSC
3.0 LUX
180mA
12 V DC
Less than 90%
14°F ~ 122°F
(-10
°~ 50°C)
It’s all on the web
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
INDOOR/OUTDOOR
DAY/NIGHT
COLOR CAMERA
Model: SG7221 Series
English Version 1.0
Dimensions:
VISIT
www.lorexcctv.com
Quick Set-up Guide
LOREX Technology Inc.
Copyright © 2008 LOREX Technology Inc. As our
products are subject to continuous improvement,
LOREX and its subsidiaries reserve the right to modify product design, specifications and prices, without
notice and without incurring any obligation. E&OE
1. Package Contents 2. Installing the Video Camera 3. Connecting the Camera
Features:
Color Bullet Camera with
Sunshade Housing, Stand,
and Mounting Hardware
60 ft. (18m) 4PIN DIN Extension Cable
NOTE: Both ends are male
*Available with SG7221R
only. AC Power Adaptor,
and 4PIN to RCA Coupler
(ACC425)
*Available with SG7221B
only. 4PIN to 6PIN
Coupler (ACC426)
1. Mount the camera stand to the desired mounting
surface. Attach the camera to the supplied stand.
Before starting permanent installation,
have another person hold the camera for
you while you verify its performance by
observing the image on a monitor.
2. Connect the Extension cable to the camera:
SG7221R
Extension Cable to
4PIN-RCA Coupler
SG7221B
Extension Cable to
4PIN-6PIN Coupler
1. Connect the A/C Power Adaptor to the 4PIN
to RCA Coupler (Black Connector). Plug the
Power adaptor into a wall outlet
Setup Diagram:
SG7221R
• Durable Weather resistant metal Camera suitable
for Indoor or Outdoor installations*
• 11 high intensity IR LEDs provide illumination in
low light conditions. **
• Color video in standard lighting, automatically
changes to B&W video in low light conditions.
• SG7221B connects to Lorex Observation Systems with 6 PIN DIN connectors (There is no
need for a power adaptor as the camera is powered by the system).
• SG7221R connects to any TV or Lorex PCI cards
(QLR Series) with RCA connector. A coupler:
RCA (female) to BNC (male) is required in order
to connect to DVRs and Observations Systems
with BNC connectors (BNCA sold separately).
* Weather resistant against dust and light rain - IP44 Rated
** IR illumination range of 16’ / 5m under ideal condition.
Objects at or beyond this range may be partially or completely obscured
SG7221B
3. Connect the Yellow RCA Connector (on the
4PIN to RCA Coupler) to the System.
BLACK: Connect to the Power Adaptor
YELLOW: Connect to the VIDEO port
Loading...