Lorex Technology LWB3801 W User Manual

Lorex Secure: Playback

Play back recorded video using the Lorex Secure app.

To play back recorded video:

1. Launch the Lorex Secure app.

2. Tap the camera you would like to view recordings from.

3. Tap .

4. The History screen opens:

HD Wire-Free Security System

GUIDE

2 / 2

English Version 1.0

Before You Start

• Upgrade your DVR firmware and mobile app to the latest versions.

• Please note that an upload speed of 2 Mbps is required for remote
video streaming (3 Mbps and above recommended). Up to 3 devices
may connect to the system at the same time.

Quick Reference Guide

www.lorextechnology.com

• Tap to select a date to search
for recordings from.

• Tap (iOS) / (Android) to
filter results by type (Motion or
Manual recording).

• Tap one of the event thumbnails
to play back the selected event.

Playback Controls:

Return to

History view

Tap to play

or pause

video

Icon

indicates

motion or

manual

recording

Channel
name

Start time

Tap the
progress
bar to
change
playback
position

• Ensure you have completed initial setup of the Lorex Secure app and
the DVR as detailed in the Quick Connection Guide.

Lorex Secure: App Overview

Homescreen

App information

Add new device

Tap to view systems, cameras or groups

View all channels.
Tap the play button ( ) on a channel to
view live video.

Configure device settings (see the section
“Lorex Secure: Device Settings” for details)

Tap a channel to view live video or
configure camera settings. See the image
below for channel screen overview.

Lorex Secure: Device Settings

Change your device settings using the Lorex Secure app.

To change device settings:

1. Launch the Lorex Secure app.

2. Tap next to your wire-free system.

3. Configure the following as needed:

• Device Name: Enter a name of your choice for
your wire-free security system (e.g., My Wire-Free
System).

• Switch User: Tap to switch to a different user for
the DVR. Password entry required.

• Update Password: Tap to change the password
used to log in for the current user.

• Recording Length: Tap to specify how long (in
seconds) the selected camera will record video for
when motion is detected.

• Resolution / Video Resolution: Tap to choose the
recording resolution for the selected camera. You
may choose 720P or 1080P.

Play back recorded video (see the section

Return to homescreen

“Lorex Secure: Playback” for details)

Date and time stamp

Signal strength

Battery life

Tap to stream live video from the camera

Recording indicator

Disable the selected camera

Configure device settings (see the section

“Lorex Secure: Device Settings” for details)

Channel Screen

• Mobile Notifications: Tap to turn all notifications
on / off (overrides channel settings – see the
section “Lorex Secure: Channel Settings” below
for details).

• Device Error Notifications: Tap to turn
notifications for hard drive issues on / off.

4. Tap SAV E to save settings.

Lorex Secure: Channel Settings

Change settings for a specific channel using the Lorex Secure app.

To change device settings:

1. Launch the Lorex Secure app.

2. Tap the channel you wish to configure on the homescreen.

3. Tap .

4. Configure the following as needed:

• Channel Name: Enter a name of your choice
for the selected channel (e.g., Living Room).

• Motion Notifications: Tap to turn motion
notifications on / off for the selected
channel.

NOTE: Turning off Mobile Notifications

in the Device Settings menu will override
notification preferences for individual
channels.

Tap to capture a snapshot of the current

camera image

Tap to manually record video, then tap

again to stop

View video in enhanced resolution

LHB900_QRG_EN_R1.indd 1 5/2/2017 6:24:28 PM

• Device Settings: Shortcut to Device Settings
menu. See the section “Lorex Secure: Device
Settings” above for details.

5. Tap Save to save settings.

LHB900_QRG_EN_R1