Wireless Digital Security Camera
Instruction Manual
English Version 3.0
LW2110 Series
Copyright © 2011 Lorex Technology Inc.
www.lorextechnology.com
Thank you for purchasing this Lorex product.
This manual refers to the following products::
• LW2110 Series
• LW2110PK2
Please visit us on the web for the most current Manuals and Quick Start Guides. Additional
Language Manuals may also be available at:
www.lorextechnology.com
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RICK OF ELECTRIC SHOCK DO NOT
REMOVE COVER. NO USER SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the products ' enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF THE PLUG TO THE WIDE SLOT AND FULLY INSERT.
B E F O R E Y O U S TA R T
THIS PRODUCT MAY REQUIRE PROFESSIONAL INSTALLATION
LOREX IS COMMITTED TO FULFILLING YOUR SECURITY NEEDS
• We have developed user friendly products and documentation.
Please read the Quick Start Guide and User Manual before you
install this product.
• Consumer Guides and Video Tutorials are available on our web
site at www.lorextechnology.com/support
• If you require further installation assistance, please visit
www.lorextechnology.com/installation or contact a
professional installer.
• Please refer to the “Need Help” insert for technical support and
customer care information.
• Please note that once the components of this product have been
unsealed, you cannot return this product directly to the store
without the original packaging.
May 5 2011 - R5
AVANT DE
ANTES DE
COMMENCER
CE PRODUIT POURRAIT EXIGER UNE
INSTALLATION PROFESSIONNELLE
LOREX S’ENGAGE À SATISFAIRE
VOS BESOINS SÉCURITAIRES
• Veuillez lire le guide de démarrage rapide et le
mode d’emploi avant d’installer ce produit
• Les guides du consommateur et les séances de tu-
torat vidéo sont disponibles sur l’Internet en visitant
www.lorextechnology.com/support
• Si vous avez besoin de l’aide pour l’installation,
veuillez visiter www.lorextechnology.com/installa-
EMPEZAR
ESTE PRODUCTO PUEDE EXIGIR UNA
INSTALACIÓN PROFESIONAL
LOREX SE COMPROMETE A SATISFACER
SUS NECESIDADES EN SEGURIDAD
• Favor de leer la guía de instalación rápida y la
guía del usuario antes de instalar este product.
• Puede conseguir las guías del consumidor y los
cursos en enseñanza video sobre el Internet visitando www.lorexcctv.com/support
• Si necesita ayuda para la instalación, visite
www.lorextechnology.com/installation o contacte
tion ou contactez un spécialiste en installation
• Veuillez référer à l’insert “Need Help” pour
ob¬tenir de l’information sur le service à la clientèle
et le support technique
• Veuillez constater qu’une fois que les
com¬posantes de ce produit ont été retirées de
l’emballage, vous ne pourrez plus retourner ce
produit directement au magasi
un especialista en instalaciones
• Favor de referir al documento “Need Help” para
obtener información acerca del servicio al cliente y
al soporte técnico
• Favor de notar que una vez que los componentes
de este producto han sido removidos del embalaje,
no podrá devolver este producto directamente a la
tienda
www.lorextechnology.com
VIEW YOUR WORLD™
VOIR VOTRE MONDE
VER SUMUNDO™
MD
ALWAYS AWARE™
TOUJOURS AU COURANT
SIEMPRE CONSCIENTE™
May 5 2011 - R5
MD
Need Help?
CONTACT US FIRST
DO NOT RETURN THIS PRODUCT TO THE STORE
Please make sure to register your product at www.lorextechnology.com
to receive product updates and information
3 Easy Ways to Contact Us:
Online:
Product Support is available 24/7 including product
information, user manuals, quick start up guides and FAQ’s at
www.lorextechnology.com/support
To order accessories, visit
www.lorextechnology.com
By Email:
Technical Support (for technical/installation issues)
support@lorexcorp.com
Customer Care (for warranty and accessory sales)
customerservice@lorexcorp.com
Customer Feedback
info@lorexcorp.com
By Phone:
North America:
Customer Service: 1-888-425-6739 (1-888-42-LOREX)
Tech Support: 1-877-755-6739 (1-877-75-LOREX)
Mexico: 1-800-514-6739
International: +800-425-6739-0
(Example: From the UK, dial 00 instead of +)
Ma y 5 20 1 1 - R 1 1
VIEW YOUR WORLD™
VOIR VOTRE MONDE
VER SUMUNDO™
MD
ALWAYS AWARE™
TOUJOURS AU COURANT
SIEMPRE CONSCIENTE™
MD
SIMPLY AWARE™
SIMPLEMENT AU COURANT
SIMPLEMENTE CONSCIENTE™
MD
Necesita Ayuda
COMUNÍQUESE PRIMERO
Vous Avez Besoin
D’aide?
CON NOSOTROS
CONTACTEZ-NOUS
D’ABORD
NO DEVUELVA ESTE PRODUCTO A LA TIENDA NE RETOURNEZ PAS CE PRODUIT AU MAGASIN
Cerciórese de por favor colocar su producto en www.
lorexcctv.com/registration para recibir actualizaciones y la información del producto
3 maneras sencillas de comunicarse con
nosotros:
En línea:
apoyo al producto disponible 24/7 incluyendo información
del producto, manuales para el usuario, guías de inicio
rápido y preguntas más frecuentes en
www.lorextechnology.com/support
Para colocar pedidos de accesorios, visite
www.lorextechnology.com
Veuillez veiller à enregistrer votre produit à www.lorexcctv.com/registration pour recevoir des mises à jour et
l’information de produit
3 façons faciles de nous contacter:
En ligne:
le support des produits est disponible 24 heures sur 24, 7
jours sur 7, y compris les informations sur les produits, les
guides de l’utilisateur, les guides de démarrage rapide et les
foires à questions
www.lorextechnology.com/support
Pour commander des accessoires, visitez
www.lorextechnology.com
Por Correo Electrónico:
soporte técnico (para asuntos técnicos/la instalación)
support@lorexcorp.com
O
servicio al cliente (respecto a la garantía y a la venta
de accesorios)
customerservice@lorexcorp.com
Comentarios de cliente
info@lorexcorp.com
Por Teléfono:
Norte América:
Atención al cliente: 1-888-425-6739 (1-888-42-LOREX)
Soporte técnico: 1-877-755-6739 (1-877-75-LOREX)
Mexico: 1-800-514-6739
Internacional: +800-425-6739-0
(Ejemplo: Desde el Reino Unido, marque el 00 en lugar del +)
Par Courriel:
support technique (pour les questions techniques et ’installation) support@lorexcorp.com
OU
service à la clientèle (pour les questions de garantie
et les ventes d’accessoires)
customerservice@lorexcorp.com
Commentaires des clients
info@lorexcorp.com
Par Téléphone:
L’Amérique du Nord:
Service à la clientèle: 1-888-425-6739 (1-888-42-LOREX)
Support technique: 1-877-755-6739 (1-877-75-LOREX)
Mexico: 1-800-514-6739
International: +800-425-6739-0
(Exemple: À partir du Royaume-Uni, composez 00 au lieu de +)
Ma y 5 20 1 1 - R 1 1
Important Safeguards
In addition to the careful attention devoted to quality standards in the manufacture process of your
video product, safety is a major factor in the design of every instrument. However, safety is your
responsibility too. This sheet lists important information that will help to assure your enjoyment
and proper use of the video product and accessory equipment. Please read them carefully before
operating and using your video product.
Installation
1. Read and Follow Instructions - All the safety and
operating instructions should be read before the
video product is operated. Follow all operating
instructions.
2. Retain Instructions - The safety and operating
instructions should be retained for future reference.
3. Heed Warnings - Comply with all warnings on the
video product and in the operating instructions.
4. Polarization - Do not defeat the safety purpose of the
polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other.
A grounding type plug has two blades
and a third grounding prong.
The wide blade or the third prong are
provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
5. Power Sources - This video product should be
operated only from the type of power source
indicated on the marking label. If you are not sure of
the type of power supply to your location, consult
your video dealer or local power company. For video
products intended to operate from battery power, or
other sources, refer to the operating instructions.
6. Overloading - Do not overload wall outlets of
extension cords as this can result in the risk of fire
or electric shock. Overloaded AC outlets, extension
cord s, fra yed po wer co rds, dama ged o r crac ked wi re
insulation, and broken plugs are dangerous. They
may result in a shock or fire hazard. Periodically
examine the cord, and if its appearance indicates
damage or deteriorated insulation, have it replaced
by your service technician.
7. Power-Cord Protection - Power supply cords should
be routed so that they are not likely to be walked on
or pinched by items placed upon or against them,
paying particular attention to cords at plugs,
convenience receptacles, and the point where they
exit from the video product.
8. Ventilation - Slots and openings in the case are
provided for ventilation to ensure reliable operation
of the video product and to protect it from
overheating. These openings must not be blocked or
covered. The openings should never be blocked by
placing the video equipment on a bed, sofa, rug, or
other similar surface. This video product should
never be placed near or over a radiator or heat
register. This video product should not be placed in
a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the video
product manufacturer’s instructions have been
followed.
9. Attachments - Do not use attachments unless
recommended by the video product manufacturer as
they may cause a hazard.
10. Camera Extension Cables – Check the rating o f your
extension cable(s) to verify compliance with your
local authority regulations prior to installation.
11. Water and Moisture - Do not use this video product
near water. For example, near a bath tub, wash bowl,
kitchen sink or laundry tub, in a wet basement, near
a swimming pool and the like.
Caution: Maintain electrical safety. Power line
operated equipment or accessories connected to
this unit should bear the UL listing mark of CSA
certification mark on the accessory itself and should
not be modified so as to defeat the safety features.
This will help avoid any potential hazard from
electrical shock or fire. If in doubt, contact qualified
service personnel.
12. Accessories - Do not place this
video equipment on an unstable
cart, stand, tripod, or table. The
video equipment may fall, causing
serious damage to the video
product. Use this video product
only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer
or sold with the video product. Any mounting of the
product should follow the manufacturer’s
instructions and use a mounting accessory
recommended by the manufacturer.
vii
Service
13. Servicing - Do not attempt to service this video
equipment yourself as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
14. Conditions Requiring Service - Unplug this video
product from the wall outlet and refer servicing to
qualified service personnel under the following
conditions.
A. When the power supply cord or plug is
damaged.
B. If liquid has been spilled or objects have fallen
into the video product.
C. If the video product has been exposed to rain
or water.
D. If the video product does not operate normally
by following the operating instructions. Adjust
only those controls that are covered by the
operating instructions. Improper adjustment of
other controls may result in damage and will
often require extensive work by a qualified
technician to restore the video product to its
normal operation.
E. If the video product has been dropped or the
cabinet has been damaged.
Use
19. Cleaning - Unplug the video product from the wall
outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
20. Product and Cart Combination - Video and cart
combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the
video product and car combination to overturn.
21. Object and Liquid Entry - Never push objects for any
kind into this video product through openings as they
may touch dangerous voltage points or “short-out”
parts that could result in a fire or electric shock.
Never spill liquid of any kind on the video product.
22. Lightning - For added protection for this video
product during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage
to the video product due to lightning and power line
surges.
F. When the video product exhibits a distinct
change in performance. This indicates a need for
service.
15. Replacement Parts - When replacement parts are
required, have the service technician verify that the
replacements used have the same safety
characteristics as the original parts. Use of
replacements specified by the video product
manufacturer can prevent fire, electric shock or
other hazards.
16. Safety Check - Upon completion of any service or
repairs to this video product, ask the service
technician to perform safety checks recommended
by the manufacturer to determine that the video
product is in safe operating condition.
17. Wall or Ceiling Mounting - The cameras provided
with this system should be mounted to a wall or
ceiling only as instructed in this guide, using the
provided mounting brackets.
18. Heat - The product should be situated away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that
produce heat.
viii
General Precautions
TRANSMITTER FCC/IC NOTICE
FCC Transmitter Notice
This equipment has been certified and found to comply with the limits regulated by the FCC part 15, subpart C.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
IC Transmitter Notice
• This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
WARNING
!
STRANGULATION HAZARD:
Infants have STRANGLED in power cords. Keep power
cords more than 3 feet away from cribs, bassinets, play
yards and other safe sleep environments for infants.
RECEIVER FCC/IC NOTICE
FCC Receiver Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
IC Receiver Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Operation is subject to the following two conditions:
1)This device may not cause harmful interference, and
2)This device must accept any interference received, including interference that may cause undesirable operation.
Son Fonctionnement est soumis aux deux conditions suivantes:
1)Le matériel ne peut étre source d'interfrences et
2)Doit accepter toutes les interférences reçue, y compris celles pouvant provoquer un fonctionnement indésirable.
CANADIAN CLASS B STATEMENT: This digital device does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus," ICES-003 of the Department of
Communications.
Cet appareil numérique respecte les limites de bruits radioelectriques applicables aux appareils numériques de Classe B
prescrites dans la norme sur le materiel brouilleur: "Appareils Numériques," NMB-003 edicles par la ministère des
Communications.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority
to operate the device.
Toute modification non approuvée explicitement par le fournisseur de licence de l'appareil peut entraîner l'annulation du droit de
l'utilsateur à utiliser l'appareil.
1. All warnings and instructions in this manual should be followed.
2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water dampened cloth for cleaning.
3. Do not use the receiver in a humid or wet place.
4. Keep enough space around the unit for ventilation. Slo
blocked.
t
s and openings in the storage cabinet should not be
It is imperative that the user follows the guidelines in this manual to avoid improper usage which may result in damage to the
unit, electrical shock and fire hazard injury. In order to improve the feature functions and quality of this product, the
specifications are subject to change without notice from time to time.
ix
1. Camera requires a wired connection to a power outlet. Power adapter included.
2. Using multiple receivers in close proximity to each other may cause a slight slowdown in frame rate performance. Try to maintain at least a few inches of space between each receiver. 3ft. extension cable included.
3. Stated IR illumination range is based on ideal conditions. Actual range and image clarity depends on installation location, viewing area and light reflection/ absorption level of object.
4. Not intended for submersion in water. Installation in a sheltered area recommended.
5. Maximum wireless transmission range. Actual range dependant upon building materials and other obstructions in path of wireless signal.
6. VGA mode has a resolution of 640 X 480 pixels; QVGA mode has a resolution of 320 X 240 pixels. Use VGA mode for best video performance. Use QVGA mode for a higher video frame rate.
Features
• FHSS Digital Wireless Technology provides excellent image quality and clarity
• Simple installation. No video cable required (1)
• Connect multiple receivers to your surveillance recorder (DVR) to create a wireless
surveillance solution (2)
• Easily connects to a TV/Monitor (RCA) or DVR (BNC)
• Night viewing up to 60ft (18m) (3)
• Install camera indoors or outdoors (4)
• Up to 150ft (46m) indoor / 450ft (137m) outdoor wireless range (5)
Receiver Features
• Compact receiver is easy to install and operate
• VGA (640x480) & QVGA (320x240) Resolution Supported (6)
• Convenient Signal Strength Indicator
• Plug directly into a TV (RCA adapter included) or surveillance recorder or use a BNC extension
cable (included) to position the wireless receiver in a more convenient location
Camera Features
• VGA Resolution Camera
• 60ft (18m) IR Night Vision (3)
• Auto infrared light filter ensures accurate color reproduction under any lighting condition
• Weather Proof Housing (IP66 rated) (4)
x
Table of Contents
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Wireless Receiver & Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Connecting The Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Camera Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Wireless Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installing Multiple Wireless Cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Powering Multiple Receivers Using The Power Splitter Cable (LW2110PK2 only) . . . 7
On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Pairing Cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Appendix A: System Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Appendix B: About Digital Wireless Technology . . . . . . . . . . . . . . . . . . . . 10
Appendix C: Facts About Digital Wireless Cameras. . . . . . . . . . . . . . . . . . 11
Appendix D: Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Appendix E: Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Appendix F: Extending Wireless Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
xi
xii
Getting Started
1 X CAMERA MOUNTING STAND
1 X BNC/RCA ADAPTER
1 X MOUNTING SCREW KIT
1 X WIRELESS CAMERA*
1 X WIRELESS RECEIVER*
2 X POWER ADAPTERS* (FOR
RECEIVER & CAMERA)
3FT/1M BNC FEMALE/BNC MALE
EXTENSION CABLE
1 X POWER SPLITTER CABLE FOR RECEIVER
(Included with 2 pack only)
*Number of cameras and receivers may vary by model.
The system comes with the following components:
CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE
SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE.
1
Wireless Receiver & Camera
1
2
3
4
5
1
6
7
*VGA mode has a resolution of 640 X 480 pixels; QVGA mode has a
resolution of 320 X 240 pixels. Use VGA mode for best video
performance. Use QVGA mode for a higher video frame rate.
1 Wireless Antenna
2 Resolution button:
3 Front LED: Gl
4 Pairing Button: F
5 BNC Connector:
6 Pairing Button: F
7 Camera Stand
Press to switch between VGA* and QVGA video resolutions.
ows green to indicate receiver is powered up.
or details, see “Pairing Cameras” on page 8.
Connect the BNC connector to the DVR or BNC extension cable.
or details, see “Pairing Cameras” on page 8.
11
2
Connecting The Camera
• Before you install the camera, carefully plan where and how it will be
positioned, and where you will route the cable that connects the camera
to the power adapter.
• Before starting permanent installation, verify its performance by
observing the image on a monitor when camera is positioned in the
same location/position where it will be permanently installed.
Installation Warnings
• Aim the Cameras to best optimize the viewing area: Select a location
for the camera that provides a clear view of the area you want to
monitor, which is free from dust, and is not in line-of-sight to a strong
light source or direct sunlight.
• Avoid installing the cameras where there are thick walls or
obstructions between the Cameras and the Receiver*.
• Select a location for the camera that has an ambient temperature
between 14°F~122°F (-10°C~50°C)
• For outdoor use, installation under a shelter is recommended.
*Avoid installing in a location which requires the wireless signal to pass through cement,
concrete, and metal structures. This will reduce the range of transmission.
For details, see “Appendix C: Facts About Digital Wireless Cameras” on page 11.
Connecting The Camera
Camera Setup
To install the camera:
1 Use the included mounting screws to mount the stand to the mounting surface:
• Mark
• Drill hol
• Firmly attach the stand to the wall using the provided screws
the position of the screw holes on the wall
es and insert the drywall plugs as needed
3
Connecting The Camera
1
2
2 Twist the camera into the head of the stand (1).
Adjust the angle of the camera until the desired view is set. Tighten the thumbscrews to
secure
the desired camera position (2).
3 Connect the power cable from the camera to the Power Adapter. Plug the power adapter to an
et or surge protector.
outl
4
Connecting The Camera
Make sure to first connect and
power on the camera(s) before
powering on the receiver; this will
ensure a proper connection.
Connect the BNC connector to the BNC to
RCA adapter (included).
BNC extension cable
Receiver
Make sure to first connect and
power on the camera(s) before
powering on the receiver; this will
ensure a proper connection.
Rear panel of TV.
Wireless Receiver Setup
To connect a wireless receiver to a surveillance recorder (DVR):
1 Connect the BNC connector on the receiver directly into an available video input.
NOTE: If necessary, attach the 3ft (1m) BNC/BNC e
xtension cable at one end to the receiver
and at the other end to the surveillance recorder.
2 Connect the power cable from the receiver to the power adapter. Plug the power adapter into
an outl
NOTE: For instructions on powering multiple receiv
et or surge protector.
ers, see “Powering Multiple Receivers
Using The Power Splitter Cable (LW2110PK2 only)” on page 7.
To connect the wireless receiver to a TV or VCR:
1 Attach the included BNC/RCA adapter to the BNC connector on the receiver and plug the
r
eceiver directly into an available video input on the TV or VCR.
NOTE: If neces
2 Co
nnect the power cable from the receiver to the cable of the power adapter. Plug the power
adapt
sary, attach one end of the 3ft (1m) BNC/BNC extension cable to the receiver
and at the other end attach the BNC/RCA adapter, then connect the BNC/RCA
adapter to the viewing/recording device.
er into a local AC power outlet or surge protector.
5
Connecting The Camera
It is not recommended to
install more than 4 digital
wireless security cameras
in the same environment to
maintain optimal video
frame rate performance.
Installing Multiple Wireless Cameras
When installing multiple digital wireless security cameras in the same environment (e.g.
LW2110PK2 - 2 pack wireless cameras) maintain as much space as possible between the
receivers using the included 3ft BNC extension cables, to optimize camera performance.
See illustrations below for examples of recommended 2 and 4 receiver installations.
Scenario A: Two Wireless Cameras
or
• Plug one receiver directly into the back of the Digital Video Rec
receiver to the included 3ft BNC extension cable and plug into the Digital Video Recorder.
der. Connect the other
Scenario B: Four Wireless Cameras
• Plug one receiver directly into the back of the Digital Video Recor
der. Connect the other
receivers to the included 3ft BNC extension cables and plug them into the Digital Video
Recorder.
NOTE: The rec
Should you require a wireless range extension, an accessory kit including an
extendable receiver and wireless antenna is available at www.lorextechnology.com.
For details, see “Appendix F: Extending Wir
eiver included does not support an extension to a range extender antenna.
el
ess Range” on page 15.
6
Connecting The Camera
Splitter cable
Power Outlet
Power Adapter
Figure A
Signal Indicator
Status Indicator
Powering Multiple Receivers Using The Power Splitter Cable
(LW2110PK2 only)
The power splitter cable allows you to connect two receivers to one power adapter.
To connect the power splitter cable to the receivers:
1 Connect the power adapter to the power splitter cable (see Figure A bel
2 Connect the ends of the power splitter cable to each of the receivers.
ow).
3 Co
nnect the power adapter to a 120V power outlet.
On-Screen Display
1 Signal Indicator:The signal indicator shows the strength of the signal being received from the
camera. The number of bars in the signal indicator shows the strength of the signal.
One or no bars indicates the signal is poor. Four bars indicate a very strong signal.
2 Status Indicator: The st
trying to locate a camera.
ATTENTION:If the signal is l
atus indicator message "Connecting" appears when the receiver is
ow (e.g. 1 or 2 bars) adjust the antennas, or reposition the
camera or receiver to improve signal strength.
7
Connecting The Camera
IMPORTANT
The camera and receiver have already been pre-paired at the
factory, which means that they are exclusively communicating
with each other. If for some reason the pairing is lost, follow
these steps to pair up the camera and receiver.
Pairing button
Pair button
Pairing Cameras
To pair the camera to the receiver:
1 Make sure that the camera and receiver are both powered up.
2 On the receiver, press and hold the Pa
iring button for 5 seconds to activate pairing function.
• The on-screen displays informs you that you have 30 seconds to press the pair button on the
cam
era.
3 Press and hold the Pa
ir button underneath the antenna on the back of the camera. You must
press the Pair button on the camera within 30 seconds of pressing the Pair button on the
Wireless Receiver. If pairing is successful, live video from the camera will immediately appear
on the monitor.
8
Appendix A: System Specifications
FPS = Frames Per Second
Appendix A: System Specifications
9
Appendix B: About Digital Wireless Technology
Appendix B: About Digital Wireless Technology
The Digital Wireless signal transmission type used by the Lorex LW2110 is also known as
FHSS -Frequency Hopping Spread Spectrum. This type of signal results in a private,
interference-free signal.
The 2.4GHz (2.400-2.480Ghz) band is being divided into sections or paths of 2MHz per
section,
sequence within this frequency range. The overall bandwidth required for frequency
hopping is much wider then 2MHz however because transmission occurs only on a small
section of this bandwidth at any given time, the signal being transmitted does not suffer
from greatly reduced signal degradation and also avoids blocked paths other devices who
act as sources of competing signals. The strength of the signal being transmitted is set to
be from 13.5-16dBm, which is much higher then the analog transmission signal allowed by
authorities around the Globe.
and each second the transmission signal hops hundreds of times in a specified
When an image is captured by the camera it is instantly converted from an analog to digital
signal and p
paths discussed above, the packets of information containing images are delivered to the
receiver and decoded into analog information. The information can then be displayed on
devices that are connected to the wireless receiver (RX).
A device pairing process is required to synchronize the transmitter (TX, Camera) and the
receiver (RX). This allows the transmitter and receiver to be on the same frequen
the same algorithm for frequency hopping. This ensures that only the paired transmitter
and receiver can maintain communication signal by hopping to the same frequency paths
at the exact same time. As a result, the chance that other devices within the same
frequency range are on the same frequency, at the same time and in the same order is
vastly reduced. Note that the pairing process is already done at the factory for products
that ship within the same packaging. Only when add-on devices are purchased is a pairing
process required.
ackaged into small packets. With each successful transmission via the 2 MHz
c
y and use
10
Appendix C: Facts About Digital Wireless Cameras
Range Limiting Factors
1
Reflection
The signal
reflects back
Scattering
The signal
scatters back
into multiple
new signals
Refraction
The signal
bends as it
travels through
an object (i.e
glass window)
Diffraction
The signal
changes
direction as it
passes around
an object
Attenuation
The signal
strength
weakens as it
passes through
an object
1
Source: Xirrus (2010). "Wi-Fi Range Dynamics". Retrieved online at
http://xirrus.gcsmarket.com/pdfs/Xirrus_Wi-Fi_Range.pdf
Appendix C: Facts About Digital Wireless Cameras
Wired VS Wireless Cameras
A wired camera has a video cable that transmits the video signal from the camera to a recording
or viewing device.
A wireless camera does no
a wireless receiver that is connected to your recording or viewing device. Although the typical
digital wireless camera is priced slightly higher than a wired camera, wireless cameras can
provide cost savings compared to standard wired setups. For example, wireless cameras do not
require cabling to be run between the camera and the viewing / recording device, which reduces
installation time and cost.
Does a wireless camera require power?
Yes. Wireless cameras require two power sources: one connected to the camera, and the other to
the receiver.
t use a video cable. Instead, it wirelessly transmits the video signal to
How far can a wireless camera transmit a video signal?
In an open field (with line of sight), a typical wireless camera has a range between 250 to 450 feet.
In a closed environment---such as an interior of a house---the wireless camera range is between
100 to 150 feet. The signal range varies depending on the type of building materials and/or objects
the wireless signal must pass through.
Cubical walls, drywall, glass, and windows
Brick, concrete floors and walls degrade signal strength
wireless camera and receiver may impact signal strength.
The signal range also depends on whether there are competing
as the camera. For example, signals from cordless phones, routers may affect signal strength.
generally
do not degrade wireless signal strength.
1
. Trees that are in the line of sight of the
signals using the same
frequency
11
Appendix C: Facts About Digital Wireless Cameras
Material Signal Reduction (%)
Plaster & Wood 10 - 30%
Brick 30 - 50%
Concrete Cinder Blocks 50 - 70%
Metal & Metal Cladding 70 - 90%
NOTE: Signals that must pass through wet or moist materials
(i.e. shrubs and trees) may be significantly reduced.
Full signal strength
(high frame rate)
Low signal strength
(low frame rate)
Signal Reduction Through Materials
Signal strength decreases as it passes through different types
of material. Try to position
your wireless camera and receiver in a location that does not pass through metal, or
concrete blocks, which can significantly reduce signal strength (as shown in the table
below).
video
The stronger the signal strength, the higher the
frame rate. The lower the signal
strength, the lower the video frame rate.
Are Digital Wireless Camera Signals Secure?
Yes. Lorex digital wireless products feature a wireless transmis
–Frequency Hopping Spread Spectrum.
This type of signal is highly resistant to eavesdropping as
sequence using an algorithm generated by the receiver, which only the camera can follow
through the "pairing" function. FHSS makes digital wireless signals secure, private, and
interference free.
How many frames per second should I expect from a digital wireless camera?
Current Lorex digital wireless cameras offer 10 - 30
performance. Actual frame rate depends mainly on signal strength and resolution (see the
chart above). Most digital wireless cameras support one or both of the following
resolutions: QVGA, and VGA.
QVGA produces video at up to 30 FPS at 320x240 resolution.
VGA produces video at up to 10-12 FPS at 640x480 resolution.
How many wireless cameras can I install?
It is recommended to install a maximum of 4 (four)
12
sion method called FHSS
it generates a channel hopping
FPS (Frames Per Second)
wireless cameras per
system.
Appendix D: Troubleshooting
Problem Solution
There is no picture from a
camera
• Check power to the camera. Make sure the adapter
is plugged in properly.
• Move the camera closer to the receiver.
The picture is dropping • Move the camera closer to the receiver.
• Try repositioning the camera, receiver, or both to
improve the reception.
The picture is or has
become choppy
• The picture may become choppy when experiencing
a lower frame rate (e.g. 6 frames per second vs. a
higher 12 frames per second).
• Try moving the camera closer to the receiver.
• Remove obstructions between the receiver and
camera.
• Try switching to QVGA mode. Resolution will be
reduced but video frame rate will increase.
The picture appears to be
unsharp
• When viewing on a large screen TV or monitor
(especially high-definition televisions), the picture
might seem unsharp as the camera is limited to VGA
resolution (640x480 pixels), while the TV or monitor
supports a much higher resolution.
• For best performance, use with TV/monitor PIP
(Picture in Picture) function. Check your TV/Monitor
product manual to see if this feature is available on
your TV/Monitor.
The picture is white • Common situation known as "washout" or "white
wash" where a strong light source is pointed at the
camera lens. The camera lens is not harmed during
a white wash.
• Do not point your camera towards a light source.
The picture is pixelated • You may be in QVGA mode. Try switching to VGA
mode by pressing the Resolution button on the
receiver.
Appendix D: Troubleshooting
If you have problems with your System, there is often a quick and simple solution. Please
try the following:
13
Appendix E: Frequently Asked Questions
Appendix E: Frequently Asked Questions
Q: What is the maximum distance I can have between the camera and the receiver?
A: Typically 45
feet (46 m) in a house. Walls, studs, furniture will interfere with the range of wireless
transmission.
Q: Why does my "wireless camera" have a power cable?
A: The term "wireless" refers to the lack of a video cable
receiver. The camera still requires a power source.
Q: What does 'line-of-sight' mean?
A: 'Line-of-sight' means that
Obstructions include walls, buildings, trees, and certain electronic devices. Materials
containing moisture (i.e wet leaves) may also act as an obstruction.
0 feet (137 m) with a clear line of sight in open space, or approximately 150
between the camera and the
there are no obstructions between
the camera and receiver.
Q: What is pairing?
A: Pairing is an electronic handshake between digital wireless devices. Pairing allows the
devices to
Q: Can digital wireless cameras be paired to more than one receiver?
A: No.
interception by 3rd parties, and prevents any other device from picking up the signal - this
also means that you cannot pair one camera to multiple receivers.
Q: How can I extend the wireless range?
A: A range extender kit is available on www.lorexcct
Extending Wireless Range” on page 15.
communicate exclusively with each other.
Digital Wireless cameras can only be paired
to one receiver. This is to prevent
v.com. For details, see “Appendix F:
14
Appendix F: Extending Wireless Range
Range Extender
Antenna
Wireless
Camera
Clear Line of Sight
Cable from range
extender
Appendix F: Extending Wireless Range
The receiver included with the LW2110 series does not support range extender antennas.
Should you require a wireless range extension, a range extender accessory kit is available.
Wireless range extension should be considered if
you experience a low
(1 or 2 signal bars) due to an extended distance between the
receiver and camera, or
signal strength
because of objects preventing line of sight between the receiver and camera.
The range extender accessory kit includes a 20ft cable
and a higher power indoor/outdoor
antenna which allows you to reposition the antenna outdoors for direct line of sight with
the camera OR simply to get around objects which are blocking the wireless signal (e.g.
metal walls). Find an example below of a typical situation in which a range extender kit is
used to achieve line of sight to improve signal strength.
Example 1: No line of sight
Example 2: Line of sight achieved through use of range extender
To order a range extender accessory kit, or to
get more information, visit
www.lorexcctv.com, and search for LW2110 Kit.
15
Appendix F: Extending Wireless Range
16
, et que ce produit (ci-après désigné comme étant le "produit"), s'il est installé
e
s
o
0
GARANTIE LIMITÉE DES PRODUITS LOREX
Lorex garantit à l'acheteur original (ci-après désigné comme étant "l'acheteur") dans un magasin au
détail seulement
correctement et - s’il y a lieu - utilisé conformément aux instructions ci-incluses, et le disque CD-
ROM qui comporte le logiciel, seront libres de tout défaut de fabrication, tant dans les pièces que la
main-d'oeuvre, pourvu que le produit soit utilisé dans des conditions normales et installé et utilisé
strictement selon les instructions incluses dans le guide qui l'accompagne.
Cette garantie couvrira la période mentionnée ci-dessous (ci-après désignée comme étant la
piles).
pas les ampoules, voyants à DEL ni les
Les obligations de Lorex selon les termes de cette garantie se limitent exclusivement aux points
"période de garantie"), commençant le jour où l'acheteur se procure le produit à l'état neuf dans un
magasin au détail.
Pièces et main-d'oeuvre : 1 année (les pièces couvertes n'incluent
suivants :
matériel.
produit ou le disque CD-ROM ou, à sa seule discrétion, le remplacement du produit jugé
défectueux.
monétaire du produit ou du disque CD-ROM en cours au moment de l'achat.
• Lorex se réserve le droit de réparer ou de remplacer, sa seule discrétion, le logiciel et/ou le
• Le remplacement des pièces sous garantie que Lorex estime être défectueuses dans le
• Si Lorex ne peut réparer ni remplacer le produit ou le disque CD-ROM, rembourser la valeur
Toutes les pièces remplacées par Lorex seront couvertes pendant la période résiduelle de la
garantie dudit produit. Exclusions de la garantie
Pour obtenir du service, veuillez vous assurer que vous avez inscrit votre produit en ligne
(www.lorexcctv.com) dans la section d'abonnement à la garantie. Cett e garantie ne couvre pas
les ampoules, voyants à DEL ni les piles incluses avec le produit ou faisant partie de celui-ci.
Should the
Cette garantie deviendra nulle si des accessoires autres que ceux vendus ou distribués par Lorex
sont utilisés ou ont été utilisés conjointement avec le produit ou si des modifications ou des
réparations ont été effectuées au produit par une entité autre qu'un centre de service autorisé par
Lorex. Cette garantie ne s'applique pas aux défauts ni aux dommages survenus suite à une utilisation
anormale du produit (incluant des conditions atmosphériques et des taux d'humidité anormaux) ou
suite à une installation ou une utilisation du produit autre que celle décrite dans le guide
accompagnant le produit. Cette garantie ne s'applique pas aux défauts ni aux dommages causés au produit suite à (i) une
proceed as follows:
utilisation insouciante du produit, (ii) mauvaise utilisation, abus, négligence, modification ou
mauvaise installation du produit, (iii) court-circuits ou transitoires électriques, (iv) tout usage de
l'acheteur qui ne correspond pas à l'installation prescrite du produit, (v) l'utilisation de pièces non
fournies par Lorex, (vi) un entretien inadéquat du produit, ou (vii) tout accident, incendie, inondation
ou autres désastres naturels.
Cette garantie ne couvre pas la performance ni la fonctionnalité de tout logiciel informatique inclus
avec le produit. Cette garantie ne couvre pas les défauts que pourrait contenir le support optique
(disque CD-ROM) ou magnétique (disquette), tel qu'un CD-ROM brisé ou comportant un défaut qui
couvre pas les frais se rapportant à l'enlèvement ni à la réinsertion de tout produit, logiciel,
l'empêcherait d'être lu adéquatement par le lecteur de disque de votre ordinateur. Lorex ne garantit
pas que le logiciel fourni avec le produit fonctionnera sans interruption ni qu'il sera libre de tout
périphérique ou disque CD-ROM installé sur votre ordinateur. Lorex se réserve le droit de modifier la conception ou d'apporter des ajouts ou des améliorations à
défaut, d'erreurs ou de 'bogues'. Lorex ne garantit pas le logiciel inclus à moins que cela ne le soit
mentionné spécifiquement dans l'entente de la licence incluse avec le produit. Cette garantie ne
ses produits, sans obligation de sa part de modifier les produits déjà fabriqués. Lorex fera tout en
son pouvoir pour fournir des améliorations et des réparations à son logiciel via son site web.
Cette garantie ne couvre pas les altérations ni les dommages effectues tout autre logiciel, ni les
bogues pouvant résider de faon permanente sur le système de l'utilisateur suite l'installation du
logiciel ci-inclus.
Lorex’s responsibility under this, or any other warranty, implied or expressed, is
limited to repair, replacement or refund, as set forth above. These remedies are the
sole and exclusive remedies for any breach of warranty. Lorex is not responsible for
direct, special, incidental, or consequential damages resulting from any breach of
warranty or under any other legal theory including but not limited to, loss profits,
downtime, goodwill, damage to or replacement of equipment and property and any
costs of recovering, reprogramming or reproducing any program or data stored in or
used with a system containing the Product CD-ROM or accompanying software. Lorex does not warrant that the software will operate with any other software except
that which is indicated. Lorex cannot be responsible for characteristics of third party
hardware or software which may effect the operation of the software included. The purchaser may have other rights under state, provincial, or federal laws and
where the whole or part of any item of this warranty is prohibited by such laws, it
proceed as follows:
Schenker Logistics
2363 E. Perry Road, Suite 171, Dock Door 44
Plainsfield, IN 46168
www.lorexcctv.com
Local: 905-940-5355
TOLL FREE CUSTOMER SUPPORT
International: 800-42-LOREX 0 (800-425-67390)
North America: 1-888-42-LOREX (1-888-425-6739)
www.strategicvista.com
www.lorexinternational.com for return instructions.
authorization number.
Always use discretion when installing video and/or audio surveillance equipment especially
when there is perceived privacy. Inquire regarding federal, state and/or local regulations
applicable to the lawful installation of video and or audio record ing or surveillance. Party
a. Please contact our customer service department to obtain a return
authorization number.
shall be deemed null and void, but the remainder of the warranty shall remain in
effect.
All expressed and implied warranties are limited in duration to the limited warranty
period. No warranties apply after that period. Some states do not allow limitation on
how long an implied warranty lasts, so this limitation may not apply to you. Some
states do not allow the exclusion or limitation of incidental or consequential
damages, so the above warranty may not apply to you. This limited warranty gives
you specific legal rights and you may also have other rights that vary from state to
state. Obtaining Service In order to obtain service, please make sure that you have registered your product
on-line (www.lorexcctv.com) in the warranty registration section.
Product require service under this warranty, the Purchaser must provide Lorex with
a copy of his/ her original, dated bill of sale; receipt or invoice, failing which Lorex
will not perform any of its obligations under this warranty. If you return the Product
and/or CD-ROM to Lorex, you must assume the risk of damage or loss during
shipment. You must use the original packaging or the equivalent, and you must pay
postage.
To claim on this warranty, proceed with the following steps. 1 Pack the Product in a well-padded sturdy carton.
b. Return the unit to: Lorex Returns
2. i). If the unit was purchased in the United States
ii). If the unit was purchased in Canada
a. Please contact our customer service department to obtain a return
b. Return the unit to: Lorex Service Center.
250 Royal Crest Court, Markham, Ont. L3R 3S1
iii) If the unit was purchased in Europe please visit:
consent may be required.
Bulbs, LED’s and Batteries)
(the “Purchaser”), that this item (the “Product”) if properly used
n 4.
i
vi
R
LOREX PRODUCT LIMITED WARRANTY Lorex warrants, to the original retail purchaser only
and installed, and where applicable, the CD-ROM on which the accompanying software is provided, is free from
manufacturing defects in material and workmanship, provided the Product is used in normal conditions and is
installed and used in strict accordance with the instructions contained.
This warranty shall be for the following warranty periods (the “Warranty Period”), commencing on the date the
Purchaser buys the Product at retail in an unused condition. Parts and Labor: 1 year (Warranted parts do not include
Lorex’s obligations under this warranty shall be limited to
• The repair and or replacement of the product by means of hardware and/or software (at option of Lorex);
• The replacement of any warranted parts found by Lorex to be defective in the Product or, in Lorex’s sole
discretion, the replacement of the Product found be Lorex to be defective.
• If Lorex is unable to repair or replace the Product or CD-ROM, refund the then-current value of the Product.
Any replacement parts furnished by Lorex in connection with this warranty shall be warranted to the Purchaser for
a period equal to the un expired portion of Warranty Period for the Product. Warranty Exclusions
This warranty does not apply to Bulbs, LED’s and Batteries supplied with or forming part of the product.
This warranty is invalidated if other than Lorex accessories are or have been used in or in connection with the
Product or in any modification or repair is made to the Product by other than a service depot authorized by Lorex. This warranty does not apply to defects or damages arising by use of the Product in other than normal (including
normal atmospheric, moisture and humidity) conditions or by installation or use of the Product other than in strict
accordance with the instructions contained in the Product’s Owner’s Manual.
This warranty does not apply to defects in or damages to the Product caused by (i) negligent use of the Product,
(ii) misuse, abuse, neglect, alteration, repair or improper installation of the Product, (iii) electrical short circuits or
transients, (iv) Purchaser usage not in accordance with product installation, (v) use of replacement parts not
supplied by Lorex (vi) improper Product maintenance, or (viii) accident, fire, flood or other Acts of God. This warranty does not cover the performance or functionality of any computer software included in the package
with the Product. This warranty only covers defects in the CD-ROM media such as a broken or a defect in the
CD-ROM that would prevent the CD-ROM from being read by your personal computer’s CD-ROM drive. Lorex
makes no warranty that the software provided with the Product will function without interruption or otherwise be
free of anomalies, errors or ‘Bugs’. Lorex makes no warranty with regard to any software provided with the
Product unless specifically set forth otherwise in a license agreement accompanying such software. This warranty
does not cover any costs relating to removal or replacement of any Product, CD-ROM, or software installed on
your computer. Lorex reserves the right to make changes in design or to make additions to or improvements in its products
without incurring any obligation to modify any product which has already been manufactured. Lorex will make
every effort to provide updates and fixes to its software via its website. This warranty does not cover any
alteration or damage to any other software that may be or may become resident on the users system as a result
of installing the software provided. This warranty is in lieu of other warranties, express or implied, and Lorex
neither assumes nor authorizes any person to assume for it any other obligation or liability in correction with the
sale or service of the Product. In no event shall Lorex be liable for any special or consequential damages arising
from the use of the Product or arising from the malfunctioning or non-functioning of the Product, or for any delay
in the performance of this warranty due to any cause beyond its control. This warranty shall not apply to the appearance or accessory items including, but not limited to cabinets, cabinet
parts, knobs etc., and the uncrating, setup, installation or the removal and reinstallation of products after repair. Lorex does not make any claims or warranties of any kind whatsoever regarding the Product’s potential, ability or
effectiveness to prevent minimize, or in any way affect personal or property damage or injury. Lorex is not
responsible for any personal damage, loss or theft related to the Product or to its use for any harm, whether
physical or mental related thereto. Any and all claims or statements, whether written or verbal, by salespeople,
retailers, dealers or distributors to the contrary are not authorized by Lorex, and do not affect this provision of this
warranty.
Local : 905-940-5355
NUMERO GRATUITO DE SERVICIO A CLIENTES:
Schenker Logistics
2363 E. Perry Road, Suite 171, Dock Door 44
Plainsfield, IN 46168
250 Royal Crest Court, Markham, Ont. L3R 3S1
iii) Si la unidad fue adquirida en Europa y desea devolver el producto por favor visite:
www.lorexinternational.com para obtener instrucciones.
Internacional: 800-42-LOREX 0 (800-425-67390)
Norteamérica: 1-888-42-LOREX (1-888-425-6739)
www.lorexcctv.com
autorización
Lorex no hace ninguna de cada declaración ni garantía de ninguna clase con respecto al potencial, capacidad o
eficacia del Producto para evitar, minimizar o en alguna forma afectar a los daños o lesiones personales o a la
propiedad. Lorex no es responsable por ningún daño personal, siniestro o robo relacionado con el Producto o a su
uso para cualquier daño, sea físico o mental relacionado con el mismo. Cualquier afirmación o declaración, sea
escrita o verbal, hecha por vendedores, minoristas o distribuidores en sentido contrario no es autorizada por
Lorex y no afecta esta disposición de esta garantía.
La responsabilidad de Lorex según ésta o cualquier otra garantía, implícita o explícita, está limitada a la
reparación, reemplazo o reembolso, como se establece anteriormente. Estas compensaciones son el único y
exclusivo remedio por cualquier incumplimiento de garantía. Lorex no es responsable por daños y perjuicios
directos, especiales, incidentes, o consecuentes resultantes de algún incumplimiento de garantía o bajo cualquier
otra teoría legal, incluyendo pero sin estar limitada a: pérdida de utilidades, paralización, plusvalía, daños o
reemplazo de equipos y propiedad y cualquier costo de recuperar, reprogramar o reproducir cualquier programa o
datos almacenados o usados con un sistema que contenga el CD-ROM del Producto o el software que lo
acompaña. Lorex no garantiza que el software operará con ningún otro software excepto con el que se indica. Lorex no
puede ser responsable de las características de hardware o software de terceras personas que puedan afectar la
operación del software incluido.
El comprador puede tener otros derechos de acuerdo con las leyes federales, provinciales o estatales y cuando
toda esta garantía o parte de la misma sea prohibida por dichas leyes, será considerada nula, pero el resto de la
garantía permanecerá vigente.
Todas las garantías expresadas e implícitas están limitadas en duración al período de garantía limitada. Ninguna
garantía se aplicará después de dicho período. Algunos estados no permiten limitación a la duración de una
garantía implícita, de modo que esta limitación puede no serle de aplicación. Algunos estados no permiten la
exclusión o limitación de daños y perjuicios incidentes o consecuentes, por lo que la garantía anterior puede no
serle de aplicación. Esta garantía limitada le otorga derechos legales específicos y usted puede también tener
otros derechos que varía de un estado a otro.
Cómo obtener servicio Con el fin de obtener servicio, por favor asegúrese de registrar haber registrado su producto en nuestra pagina
web www.lorexcctv.com en la sección de registro de garantía. Si el Producto necesitase servicio bajo esta
garantía, el Comprador debe hacer llegar a Lorex una copia del recibo o factura de compra, con su fecha
respectiva, sin lo cual Lorex no estará obligada a cumplir con ninguna de sus obligaciones bajo esta garantía. Si
devuelve el Producto y/o el CD-ROM a Lorex, debe usted asumir el riesgo de daño o pérdida durante el envío.
Debe usar el envase original o equivalente y debe pagar el flete.
Para hacer un reclamo bajo esta garantía, proceda con los siguientes pasos. 1. Empaque el Producto en una caja robusta bien acolchada.
2. i). Si la unidad fue comprada en Estados Unidos proceda en la siguiente forma:
a. Para devoluciones por favor contacte nuestro departamento de servicio para obtener un número de
b. Devuelva la unidad a: Lorex Returns
autorización.
ii). Si la unidad fue comprada en Canadá proceda en la siguiente forma:
a. Para devoluciones por favor contacte nuestro departamento de servicio para obtener un número de
b. Devuelva la unidad a: Lorex Customer Service.
Use siempre discreción cuando instale equipo de vigilancia por video y/o audio especialmente cuando se
percibe privacidad. Consulte acerca de las regulaciones federales, estatales y /o locales aplicables a la
instalación legal de equipos de grabación o vigilancia por video y/o audio. Puede requerirse el
consentimiento de las partes.
CD-ROM o, por decisión única de Lorex, al reemplazo del Producto que Lorex encuentre defectuoso.
en ese momento del Producto o CD-ROM.
GARANTÍA LIMITADA DEL PRODUCTO LOREX
Lorex garantiza, sólo al comprador original al por menor (el “Comprador”) que este artículo
(el “Producto”), si se usa e instala debidamente, y – si hay lugar - el CD-ROM en el que se proporciona el
software asociado, está libre de defectos de fabricación en materiales y mano de obra, sujeto a que el Producto
sea usado en condiciones normales y que sea instalado y usado estrictamente de acuerdo con las instrucciones
contenidas.
Esta garantía será para los siguientes períodos de garantía (el “Período de Garantía”), a partir de la fecha en que
el Comprador adquiera el Producto al por menor en la condición de no haber sido usado previamente.
Repuestos y Mano de Obra: 1 año (Las piezas garantizadas no incluyen bombillas, LEDs y baterías)
Las obligaciones de Lorex bajo esta garantía estarán limitadas a:
• la reparación o el reemplazo del producto por medio de hardware y/o software (a opción de Lorex).
• el reemplazo de cualquier parte garantizada que Lorex determine que está defectuosa en el Producto o
• Si a Lorex no le es posible reparar o reemplazar el Producto o el CD-ROM, se devolverá el valor vigente
Se garantizará al Comprador cualquier pieza de repuesto provista por Lorex en conexión con esta garantía por
un período igual a la parte no vencida del Período de Garantía del Producto. Exclusiones de la garantía
Esta garantía no se aplica a las bombillas, LEDs y baterías suministradas con el producto o que formen parte del
mismo.
Esta garantía quedará nula si se han usado accesorios que no son Lorex en el Producto o en relación con el
mismo o si se hace alguna modificación o reparación al Producto en algún taller que no sea un local de servicio
autorizado por Lorex. Esta garantía no se aplica a defectos o daños resultantes del uso del producto en condiciones diferentes a las
normales (incluyendo condiciones atmosféricas o de humedad normales) o por la instalación o uso del Producto
en forma distinta a seguir estrictamente las instrucciones contenidas en el Manual del Propietario del Producto. Exclusiones de la garantía
Esta garantía no se aplica a las bombillas, LEDs y baterías suministradas con el producto o que formen parte del
mismo.
Esta garantía quedará nula si se han usado accesorios que no son Lorex en el Producto o en relación con el
mismo o si se hace alguna modificación o reparación al Producto en algún taller que no sea un local de servicio
autorizado por Lorex. Esta garantía no se aplica a defectos o daños resultantes del uso del producto en condiciones diferentes a las
normales (incluyendo condiciones atmosféricas o de humedad normales) o por la instalación o uso del Producto
en forma distinta a seguir estrictamente las instrucciones contenidas en el Manual del Propietario del Producto. Esta garantía no se aplica a defectos o daños al Producto causados por (i) uso negligente del Producto, (ii) mal
uso, abuso, negligencia, alteración, reparación o instalación incorrecta del Producto, (iii) cortocircuitos o
corrientes eléctricas transitorias, (iv) uso por el Comprador que no está de acuerdo con la instalación del
producto, (v) uso de piezas de repuesto no suplidas por Lorex (vi) inadecuado mantenimiento del Producto, o
(vii) accidente, incendio, inundación u otros accidentes naturales. Esta garantía no cubre el rendimiento o funcionalidad de ningún software de computadora incluido en el paquete
con el Producto. Esta garantía sólo cubre defectos en el material de CD-ROM, tal como roturas o defectos en el
CD-ROM que impida que sea leído por la unidad de CD-ROM de su computadora personal. Lorex no garantiza
que el software provisto con el Producto funcione sin interrupción o que de otra forma esté libre de anomalías,
errores o “bugs”. Lorex no ofrece ninguna garantiza con respecto a algún software provisto con el equipo a
menos que específicamente se establezca de otra forma en un acuerdo de licencia que acompañe a dicho
software.
Esta garantía no cubre ningún costo relativo a la remoción o reemplazo de algún Producto, CD-ROM, o software
instalado en su computadora.
Lorex se reserva el derecho de hacer cambios en el diseño o hacer adiciones o mejoras a sus productos sin
incurrir en ninguna obligación de modificar algún producto que ya haya sido fabricado.
Lorex tratará en lo posible de proporcionar actualizaciones y arreglos a su software por medio de su página en la
red.
Esta garantía no cubre ninguna alteración ni daño a algún otro software que pueda ser instalado o pueda quedar
instalado en el sistema del usuario como resultado de la instalación del software provisto.
Esta garantía es el reemplazo de otras garantías, expresas o implícitas, y Lorex no asume ni autoriza a ninguna
persona a asumir por ella ninguna obligación en relación con la venta o servicio del producto. En ningún caso
Lorex será responsable por ningún daño o perjuicio especial o consecuente resultante del uso del Producto o de
su mal funcionamiento o incapacidad de funcionar, o por cualquier demora en la atención de esta garantía
debida a causas fuera de su control. Esta garantía no se aplicará a la apariencia o artículos accesorios incluyendo, sin estar limitado a ellos,
gabinetes, piezas de gabinetes, perillas, etc., y el desembalaje, instalación, configuración, o rem oción y
reinstalación del producto después de ser reparado.
www.lorexcctv.com
Local : 905-940-5355
Schenker Logistics
2363 E. Perry Road, Suite 171, Dock Door 44
Plainsfield, IN 46168
a. Veuillez contacter notre département de service à la clientèle pour obtenir un numéro
d'autorisation pour le retour.
b. Retournez le produit à : Lorex Returns
ii) Si l'appareil a été acheté au Canada, suivez ces
étapes-ci :
a. Veuillez contacter notre département de service à la clientèle pour obtenir un numéro
d'autorisation pour le retour. b. Retournez le produit à : Lorex Customer Service
250 Royal Crest Court, Markham, ON L3R 3S1
International : 800-42-LOREX 0 (800-425-67390)
L'Amérique du nord: 1-888-42-LOREX (1-888-425-6739)
COMPOSEZ LA LIGNE D’ASSISTANCE SANS FRAIS AUS CONOMMATEURS:
Soyez toujours très discret lorsque vous installez des systèmes de surveillance, surtout dans les endroits plus retirés. Informez-
vous au sujet des lois et règlements municipaux, provinciaux ou fédéraux qui s’appliquent à l’installation d’appareils de
Cette garantie a préséance sur toutes les autres garanties tacites ou explicites, incluant la garantie en qualité
loyale et marchande et les aptitudes visant toute autre obligation ou responsabilité de la part de Lorex, et par les
présentes, Lorex n’autorise aucune personne ni entité à assumer pour elle nulle autre responsabilité en rapport
avec la vente de ce produit. Lorex ne sera pas tenue responsable, en aucune circonstance, des dommages-
intérêts directs ou indirects survenant de l'utilisation du produit ou suite au mauvais fonctionnement ou à l'absence
de fonctionnement dudit produit, ainsi que pour tout délai dans l'exécution de cette garantie suite à des
circonstances hors du contrôle de Lorex. Lorex ne garantit d’aucune manière l'apparence extérieure du produit, ni les pièces ou accessoires incluant, mais
ne s'y limitant pas, le boîtier, les pièces du boîtier, les boutons, etc., ainsi que le déballage, l'installation,
l'enlèvement et la réinstallation du produit après une réparation. Lorex ne garantit pas et ne fait aucune revendication en ce qui a trait au potentiel, à la capacité ou l'efficacité de
prévenir, réduire ou d'une façon quelconque, d'influer sur les dommages à la propriété privée ou sur les blessures
corporelles. Lorex ne sera pas tenue responsable des blessures corporelles, dommages à la propriété
personnelle, perte ni au vol se rapportant de près ou de loin au produit ou son usage dans un cadre malveillant,
qu'il soit physique ou mental. Lorex n'autorise aucunement les représentants, détaillants ou grossistes, à faire des
revendications ou des énoncés de la part de Lorex, tant par voie écrite que verbale et ces énoncés n'influent
d'aucune manière sur les clauses de cette garantie. La seule responsabilité de Lorex, selon les termes de cette garantie, qu'ils soient tacites ou explicite s, se limite à
une réparation, un remplacement ou un remboursement, selon les clauses décrites dans les présentes. Ces
recours constituent les seuls auxquels a droit l'acheteur pour les bris des clauses de la garantie. Lorex ne sera pas
responsable des dommages-intérêts spéciaux, directs ou indirects, qui résulteraient d'un bris des clauses de cette
garantie ou de toute autre convention législative, incluant mais ne s'y limitant pas, les pertes de profits, pannes de
courant immobilisant des équipements, la valeur ajoutée des biens incorporels, les dommages effectués au produit
et à la propriété ou les coûts reliés à leur remplacement, ainsi que les frais de recouvrement, reprogrammation ou
reproduction d'un programme ou des données stockées dans un système contenant le disque CD-ROM du produit
ou le logiciel qui accompagne celui-ci.
L'acheteur peut bénéficier de certains droits provinciaux ou fédéraux additionnels et toute clause de cette garantie
qui soit prohibée par de telles lois sera jugée nulle et sans effet mais les autres clauses demeureront en vigueur. Lorex ne garantit pas que ce logiciel fonctionnera conjointement avec tout autre logiciel ou suite logicielle, ˆ
moins que cela ne soit indique. Lorex ne sera pas tenue responsable des caractéristiques ni des fonctions du
matériel ou des logiciels d'un tiers pouvant entrer en conflit avec le fonctionnement du logiciel ci-inclus. Toutes les garanties tacites ou explicites se limitent à la durée de la garantie limitée. Aucune garantie ne sera
applicable après cette période de temps. Certains états ou provinces ne permettent pas de restrictions en ce qui a
trait aux termes d’une garantie tacite, ni d’exclusions aux dommages-intérêts directs ou indirects et il se peut que
ces restrictions ne s'appliquent pas à vous. Cette garantie donne à l’acheteur original des droits spécifiques et il se
peut que d’autres droits, variant d’un état ou d’une province à l’autre, puissent lui être conférés. Obtention du service
Si l'acheteur a besoin de service pour son produit, selon les termes de cette garantie limitée, il doit fournir à Lorex
une copie de la facture d'achat affichant clairement la date et l'endroit où le produit a été acheté. Sans cette
preuve d'achat, Lorex ne sera pas dans l'obligation de remplir ses obligations envers l'acheteur. Si vous retournez
le produit et/ou le disque CD-ROM à Lorex, vous devez assumer le risque que ceux-ci soient endommagés ou
perdus au cours de l'expédition. Vous devez emballer le produit dans sa boîte originale ou un emballage adéquat
et vous devez défrayer les coûts d'expédition à l'une des adresses mentionnées ci-dessous.
Pour bénéficier du service sous garantie, vous devez suivre les étapes ci-dessous :
1. Emballez le produit dans une boîte solide et remplie de matériau d'expédition.
2. i) Si l'appareil a été acheté aux États-Unis, suivez ces étapes-ci :
iii) Si l'unité a été achetée dans Europe veuillez visiter : www.lorexinternational.com pour les
instructions de retour
surveillance audio et vidéo. Il se peut que le consentement de la partie surveillée soit exigé.
Enhance your security with genuine Lorex products and accessories.
Order whatever you need at www.lorextechnology.com
or call 1-888-42-LOREX (1-888-425-6739)
Special offer Coupon: MLLLLDCG-CM-OOJICORN
LW2702
Parking Lot
LBC6050
Home
Convenience Store
Office
LNZ4001
Restaurant
LDC6050
CVC6950B
PROTECT EVERYTHING
THAT MATTERS
Add wired or wireless cameras to expand the
“Envelope of Protection” for your business,
your home and your family
Front Door
Nursery
Drive Way
Home Office
LW2902
Backyard
May 9 2011 - R14
LW2110
LW2301
LW2003
LW2201
Loading...