Lorex WL2110KIT Quick Start Manual

www.lorextechnology.com

SMA connector

Extension cable

Final Result

Antenna

Wireless Receiver

DVR /
Monitor

Power connector

Extension
cable

WL2110KIT: Installation Instructions

Step 1 of 2: Set up the antenna and wireless receiver

1. Connect the extension cable (included with the antenna) to the SMA connector on the wireless receiver as shown below.

2. Connect the other end of the extension cable to the antenna.

3. Connect the power adapter to the wireless receiver’s DC port. Connect the wireless receiver to a DVR/monitor.

NOTE: For antenna mounting instructions, refer to the antenna installation guide.

Pairing button

Pair button

Step 2 of 2: Pair the camera and receiver

To pair the camera to the receiver:

1. Power on the camera and receiver.

2. On the receiver, press and hold the Pairing button for 5 seconds to activate the pairing function.

• The on-screen displays informs you that you have 30 seconds to press the Pair button on the

camera.

3. Press and hold the Pair button underneath the antenna on the back of the camera.

• You must press the Pair button on the camera within 30 seconds of pressing the Pair button

on the Wireless Receiver. If pairing is successful, live video from the camera will immediately
appear on the monitor.

Copyright © 2011 Lorex Technology

2

WL2110KIT_QSG_EN_R1