Lorex VQ2120 Specifications

NIGHT VISION WITH 68 POWER

INFRARED LED LAMP

MODEL VQ2120
NIGHT VISION ACCESSORY

‘Y’ CONNECTOR

METAL STAND

MOUNTING SCREWS

THIS PACKAGE CONTAINS:

1 - Night Vision Accessory
1 - 12 V DC Power Supply
1 - ‘Y’Conne ctor
1 - Metal Stand for Night Vision
3 - Mounting Screws
1 - Owners Manual
1 - Warranty Card

12V DC POWER SUPPLY

OWNERS MANUAL

FEATURES

1. Weatherproof housing ideal for indoor or outdoor use.

2. Infra-red LED emitters allows user to ‘See in the dark’ up to 35 to 40 ft distance

3. Can be used with existing LOREX / SYLVANIA B&W observation system cameras & most B&W specialty cameras

4. Clarity of the picture depends on the resolution of the camera that is used. The Night Vision LEDS cover an angle
of 50° to 60°.

5. ‘Y’ connector included with Night Vision allows user to use one power supply (700mA) for Camera and Night Vision

CONNECTION WITH ‘Y’ CONNECTOR - FOR USE WITH SPECIALTY CAMERAS

A ‘Y’ connector cable is supplied with this system. A ‘Y’ connector cable allows you to split the power; requiring
you to use only one power supply.

1. Plug the Y connectors DC socket into the supplied 12V DC 700mA power adapter

2. Plug one side of the Y connector’s DC plug into the Night Vision’s DC IN jack and the other end to the camera.

3. Plug the 12V DC power supply into an electrical outlet and proceed with the installation of the Night Vision to the
Camera (see the diagram below for more details)

NOTE: FOR OPTIMAL PERFORMANCE , PLACE THE NIGHT VISION ACCESSORY AS CLOSE AS POSSIBLE

TO THE CAMERA

NIGHT VISION

12V DC POWER ADAPTER

Y CONNECTOR

SPECIALTY CAMERA

CONNECTION WITHOUT ‘Y’ CONNECTOR - FOR USE WITH OBSERVATION SYSTEM CAMERAS

1. Plug one side of the 12V DC power supply cable to the Night Vision’s DC IN jack and other end into an electrical outlet and
proceed with the installation of the Night Vision to the Observation System Camera (see the diagram below for more details).

12V DC POWER ADAPTER

NIGHT VISION

OBSERVATION SYSTEM CAMERA

NOTE: FOR OPTIMAL PERFORMANCE , PLACE NIGHT VISION ACCESSORY AS CLOSE AS POSSIBLE TO THE

CAMERA

SPECIFICATIONS

IR Turn on Level: 8 lux ± 3 lux
Power Requirement: 12V DC Adapter 700 mA(included)
Current Consumption IR LED OFF 12VDC, <10mA

IR LED ON 12VDC, <400mA
Operating Temperature: 14°F to 113°F (-10°C to 45°C)
Wave Length: 850 NM / 74mm (dia)
Weatherproof: IP67, submersible up to 4 hours in water
Weight: 0.60 lbs
Dimensions: 74mm / 27mm

Housings: Black -Aluminum with Bracket

Distributed By:

Lorex Technology Inc

.

As our products are subject to continuous improvement, SVII and its subsidiaries reserve the right to modify product

design, specifications and prices, without notice and without incurring any obligation. E&OE

FOR INFORMATION:

www.lorexcctv.com