Lorex LW2275 Series, Vantage LW2281 SERIES Quick Start Manual
WIRELESS DIGITAL SECURITY CAMERA
LW2275 SERIES
QUICK START GUIDE
NOTE: Avoid installing in a location which
requires the wireless signal to pass through
cement, concrete and metal structures. This will
reduce the transmission range.
A. Connect the Camera
B. Connect the Receiver to an Observation System / DVR for recording or TV for Viewing**
1. Obseration Monitor
or DVR with BNC:
Attach the included RCA/BNC
adapter to RCA cable and plug
into Observation Monitor or DVR.
Connect the Audio end of the
RCA cable to the Audio input of
the Observation Monitor or DVR.
2. TV with RCA Inputs:
Connect the RCA Video and
Audio ends of the RCA Audio/
Video cable to the Video and
Audio inputs on your TV.
1
Connect power adaptor to local
120V AC power outlet
Mount camera stand to the wall.
1
2
4
Connect one end of the Camera
Power Adapter to the Camera
and the other end to an
electrical outlet.
Screw the
Antenna to the
back of the
camera.
NOTE: Wireless camera requires a power
source to operate.
NOTE: Before you install a camera, carefully plan where and how it
will be positioned, and where you will route the cable that connects the
camera to the power adaptor. Before starting permanent installation,
verify its performance by observing the image on a monitor when the
camera is positioned where it will be permanently installed.
ATTENTION: Make sure to first connect
and power on the camera before powering
on the receiver; this will ensure a proper
connection.
www.lorextechnology.com
LW2275 Series QSG_EN_R1 Page 1
Getting Started
3
Screw the camera onto
the head of the stand(1).
Adjust the angle of the
camera until the desired
view is set. Tighten the
thumbscrew to secure the
camera position (2).
1
2
Attach the included
Antenna to the receiver
by screwing it on.
Take the double
sided tape supplied
to securely attach
the receiver to a flat
surface.
OPTIONAL
2
3
View your Camera on any Observation Monitor/DVR with BNC
inputs or TV with RCA inputs.**
4
Connect one end of the Receiver
Power Adapter to the Receiver and
the other end to an electrical outlet.
IMPORTANT: If the video appears
pixelated, make sure the receiver is set to
VGA resolution as QVGA will result in a
pixelated image. Press RESOLUTION button
to switch resolution.
** Requires viewing/recording
device with RCA Video or BNC Video
input. Viewing/ Recording device
sold separately.
1
2
This Wireless Digital Security
Camera System comes with the
following components:
• Digital Wireless Color Camera
with Sunshade
• Camera Stand
• Wireless Receiver
• Antenna’s for Camera and
Receiver
• Power Adaptors for Camera and
Receiver
• RCA/BNC Adapter
• Mounting Hardware
• Double Sided Tape for Receiver
• Instruction Manual
It’s all on the Web
For detailed setup information, please refer to your
User’s Manual. For additional information and
accessory purchases, please visit our website
www.lorextechnology.com/support
REGISTER NOW!
TO RECEIVE 3 MONTHS
WARRANTY EXTENSION
www.lorextechnology.com/warranty
©2011 Lorex Technology Inc.
As our product is subject to continuous improvement, Lorex Technology & subsidiaries
reserve the right to modify product design, specifications, prices & warranty without
notice and without incurring any obligation. E&OE
Multi Digital Wireless Camera Installation
When installing multiple
digital wireless security
cameras in the same
environment maintain as
much space as possible
between the receivers
to optimize camera
performance.
NOTE: It is not recommended to install more than 4 digital wireless security cameras
in the same environment to maintain optimal video frame rate performance.
Need to extend the wireless range?
See product manual for further details.
www.lorextechnology.com
LW2275 Series QSG_EN_R1 Page 2
WIRELESS DIGITAL SECURITY CAMERA
LW2275 SERIES
QUICK START GUIDE
DVR
Loading...