Lorex SG7555RPK4 Quick Setup Manual

LOREX Technology Inc.
Copyright © 2008 LOREX Technology Inc. As our
products are subject to continuous improvement,
LOREX and its subsidiaries reserve the right to mod­ify product design, specifications and prices, without
notice and without incurring any obligation. E&OE

Quick Set-up Guide

It’s all on the web

Product Information

User Manuals

Quick Start Guides

Specification Sheets

Software Upgrades

Firmware Upgrades

VISIT

www.lorexcctv.com

4. Camera Specifications

H O M E & B U S I N E S S S E C U R I T Y

HIGH RESOLUTION

WEATHERPROOF COLOR CAMERA

WITH NIGHT VISION AND AUDIO

Dimensions:

Image Device 1/4” Color Image Sensor

Effective Pixels 656H x 492V

Scanning System

Resolution

AES Shutter Speed

S/N Ratio

Sync. System

Min. Illumination

White Balance

Video Output

Lens

Power Requirement

Power Consumption

Operating Temp

Operating Humidity

2:1 Interlace
NTSC: 525 Lines

Horizontal 480 TV lines

1/60 ~ 1/50,000 sec.

More than 48dB (AGC off)

Internal

3 LUX @F1.2 (no LED)
0 LUX (with LED)

AWB

1.0 Vp-p (75 ohms)

Fixed Lens (3.6mm)

DC 12V ± 10%

With IR: Max 330mA
W/o IR: Max 90mA

14°F ~ 122°F
(-10

°~ 50°C)

Within 90% RH

Model: SG7555RPK4

Refer to the Product Package or online

Spec Sheet for specific Packaging

Configurations.

English Revision 1.0

Viewing Angle H: 59°; V:44°; D: 73°

IR Night Vision 24 IR LED / 850nm / 50’

(15m)

Termination 6 Pin DIN

FOV (Diagonal) 70 Degrees

Weight (With Stand) 0.81lb / 0.36 kg

1. Package Contents 2. Installing the Camera 3. Camera Diagram

4 x Cameras

1. Mount the camera stand to the desired mounting
surface. Attach the camera to the supplied stand.

2. Aim the camera. Remove the protective film from
the lens.

3. Connect the Extension cable to the camera.
Connect the other end of the Extension Cable to
the Observation System or DVR.

Note: Confirm that the arrows
on the DIN Extension cable
are aligned with the Camera
Cable and System ports when
connecting the cable. If the
pins in the DIN Cable are bent,
the Camera will NOT function

6-PIN DIN Connection:

4x Camera Stands

Lift the plastic tab on
the lower edge of
the camera to
remove the
protective film.

Note: Test the cameras prior to selecting a permanent
mounting location by temporarily connecting the
Cameras and Cables to the System.

Cameras with 6 Pin DIN connections draw
power from the Observation System or
DVR. Additional power adapters are not
needed for these cameras.

System Connection Diagram:

4 x 100’ (30m) DIN
Extension Cables

Infra-Red

LEDs

Camera

Lens

Micro­phone

Adjustable

Stand

DIN Input

Connector

Features:

• High Resolution Image Sensor

• 24 High Intensity IR LEDs provides effective night
vision range up to 50 ft. (15 m)**

• Day / Night mode: Picture automatically switches to
B&W delivering better clarity in low light conditions

• Built in microphone provides one-way audio from the
camera to the system

• Weatherproof*** Cameras ideal for indoor and outdoor
applications (IP66)

• 100 ft.(30m) extension cable included per camera

• Ceiling or Wall Mountable Camera with versatile stand
provides flexible mounting options

** Night Vision Range up to 50ft. (15m) in ideal conditions. Objects
at or beyond this range may be partially or completely obscured,
depending on the camera application.
*** Not recommended for submersion in water.

NOTE - This Camera includes a Mechanical Auto IR Cut Filter .
When the Camera changes between Day/Night lighting, an audible
clicking noise may be heard from the camera. This clicking is nor­mal, and indicates the Camera filter is working.

NOTE: The camera can be mounted to either a wall or
a ceiling.