Lorex SG7555RB Quick Setup Manual

LOREX Technology Inc. Copyright © 2008 LOREX Technology Inc. As our products are subject to continuous improvement, LOREX and its subsidiaries reserve the right to mod­ify product design, specifications and prices, without notice and without incurring any obligation. E&OE
Quick Set-up Guide
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
VISIT
www.lorexcctv.com
Refer to the Product Package or online
Spec Sheet for specific product
configuration.
4. Camera Specifications
H O M E & B U S I N E S S S E C U R I T Y
HIGH RESOLUTION
WEATHERPROOF COLOR CAMERA
WITH NIGHT VISION AND AUDIO
Dimensions:
Image Device 1/4” Color Image Sensor
Effective Pixels 656H x 492V
Scanning System
Resolution
AES Shutter Speed
S/N Ratio
Sync. System
Min. Illumination
White Balance
Video Output
Lens
Power Requirement
Power Consumption
Operating Temp
Operating Humidity
2:1 Interlace NTSC: 525 Lines
Horizontal 480 TV lines
1/60 ~ 1/50,000 sec.
More than 48dB (AGC off)
Internal
3 LUX @F1.2 (no LED) 0 LUX (with LED)
AWB
1.0 Vp-p (75 ohms)
Fixed Lens (3.6mm)
DC 12V ± 10%
With IR: Max 330mA W/o IR: Max 90mA
14°F ~ 122°F (-10
°~ 50°C)
Within 90% RH
Model: SG7555RB Series
English Revision 1.0
Viewing Angle H: 59°; V:44°; D: 73°
IR Night Vision 24 IR LED / 850nm / 50’
(15m)
Termination 6 Pin DIN
FOV (Diagonal) 70 Degrees
Weight (With Stand) 0.81lb / 0.36 kg
Features:
• High Resolution Image Sensor
• 24 High Intensity IR LEDs provides effective night vision range up to 50 ft. (15 m)**
• Day / Night mode: Picture automatically switches to B&W delivering better clarity in low light conditions
• Built in microphone provides one-way audio from the camera to the system
• Weatherproof*** Cameras ideal for indoor and outdoor applications (IP66)
• All-in-one cable providing Video, Audio & Power, plugs directly to the DIN ports of the system and eliminates the need for a separate power adaptor
• 100 ft.(30m) extension cable included per camera
• Ceiling or Wall Mountable Camera with versatile stand provides flexible mounting options
** Night Vision Range up to 50ft. (15m) in ideal conditions. Objects at or beyond this range may be partially or completely obscured, depending on the camera application. *** Not recommended for submersion in water.
1. Package Contents 2. Installing the Camera 3. Camera Diagram
1 x Camera 1 x Camera Stand
1. Mount the camera stand to the desired mounting surface. Attach the camera to the supplied stand.
2. Aim the camera. Remove the protective film from the lens.
3. Connect the Extension cable to the camera. Connect the other end of the Extension Cable to the System.
Note: Confirm that the arrows on the DIN Extension cable are aligned with the Camera Cable and System ports when connecting the cable. If the pins in the DIN Cable are bent, the Camera will NOT function
DIN System Connection Diagram:
1 x 100’ (30m) DIN Extension Cable
Lift the plastic tab on the lower edge of the camera to remove the protective film.
1 x DIN to BNC Coupler
1 x BNC to RCA Adaptor
1 x Power Adaptor
*
* Included with the SG7555RB Single Pack only. This
provides universal compatibility to industry standard BNC and RCA connectors.
Note: Test the cameras prior to selecting a permanent mounting location by temporarily connecting the Cameras and Cables to the System.
Cameras with 6 Pin DIN connections draw power from the System. Additional power adaptors are not needed for these cameras, when connecting to DIN ports.
Infra-Red
LEDs
Camera
Lens
Micro­phone
Adjustable
Stand
DIN
Connector
DIN to BNC System Connection Diagram:
WARNING - Regulated 12V DC 500mA power supply is REQUIRED for
use with this camera, when connected to a BNC system. Use of a non­regulated, non-conforming power supply can damage this product and will void the warranty.
NOTE - This Camera includes a Mechanical Auto IR Cut Filter . When the Camera changes between Day/Night lighting, an audible clicking noise may be heard from the camera. This clicking is nor­mal, and indicates the Camera filter is working.
NOTE: The camera can be mounted to either a wall or a ceiling.
* To connect to a TV use the included BNC to RCA Adaptor.
* *
Loading...