Lorex SG7555B Quick Setup Manual
LOREX Technology Inc.
Copyright © 2008 LOREX Technology Inc. As our
products are subject to continuous improvement,
LOREX and its subsidiaries reserve the right to modify product design, specifications and prices, without
notice and without incurring any obligation. E&OE
Quick Set-up Guide
It’s all on the web
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
VISIT
www.lorexcctv.com
4. Camera Specifications
H O M E & B U S I N E S S S E C U R I T Y
HIGH RESOLUTION
WEATHERPROOF COLOR CAMERA
WITH NIGHT VISION AND AUDIO
Dimensions:
Image Device 1/4” Color Image Sensor
Effective Pixels 656H x 492V
Scanning System
Resolution
AES Shutter Speed
S/N Ratio
Sync. System
Min. Illumination
White Balance
Video Output
Lens
Power Requirement
Power Consumption
Operating Temp
Operating Humidity
2:1 Interlace
NTSC: 525 Lines
Horizontal 480 TV lines
1/60 ~ 1/50,000 sec.
More than 48dB (AGC off)
Internal
3 LUX @F1.2 (no LED)
0 LUX (with LED)
AWB
1.0 Vp-p (75 ohms)
Fixed Lens (3.6mm)
DC 12V ± 10%
With IR: Max 330mA
W/o IR: Max 90mA
14°F ~ 122°F
(-10
°~ 50°C)
Within 90% RH
Model: SG7555B
Refer to the Product Package or online
Spec Sheet for specific product
configuration.
English Revision 1.0
Viewing Angle H: 59°; V:44°; D: 73°
IR Night Vision 24 IR LED / 850nm / 50’
(15m)
Termination 6 Pin DIN
FOV (Diagonal) 70 Degrees
Weight (With Stand) 0.81lb / 0.36 kg
Features:
• Hi Resolution Image Sensor
• 24 Hi Intensity IR LEDs provides effective night vision
range over 50 ft. (15 m)**
• Day / Night mode: Picture automatically switches to
B&W delivering better clarity in low light conditions
• Weatherproof*** Cameras ideal for Outdoor and indoor
applications (IP66)
• Plug and Play Cameras: all-in-one camera cable
(providing Video, Audio & Power) plugs directly to the
monitor and eliminates the need for a separate power
adaptor
• 100 ft.(30m) extension cable included per camera
• Ceiling or Wall Mountable Cameras with versatile stand
provides flexible mounting options
** Night Vision Range up to 50ft. (15m) in ideal conditions. Objects
at or beyond this range may be partially or completely obscured,
depending on the camera application.
*** Not recommended for submersion in water.
1. Package Contents 2. Installing the Camera 3. Camera Diagram
1 x Color Day/Night
Camera
1 x Camera Stand
1. Mount the camera stand to the desired mounting
surface. Attach the camera to the supplied stand.
2. Aim the camera. Remove the protective film from
the lens.
3. Connect the Extension cable to the camera.
Connect the other end of the Extension Cable to
the Observation System or DVR.
Note: Confirm that the arrows on the DIN Extension cable
are aligned with the Camera
Cable and System ports when
connecting the cable. If the
pins in the DIN Cable are bent,
the Camera will NOT function
DIN System Connection Diagram:
1 x 100’ (30m) DIN
Extension Cable
Lift the plastic tab on
the lower edge of
the camera to
remove the
protective film.
1 x DIN to BNC Coupler
1 x Power Adaptor
1 x BNC to RCA Adaptor
*
* DIN to BNC Coupler and Power Adaptor are included with
the SG7555B Single Pack only. This provides universal
compatibility to industry standard BNC connectors.
Note: Test the cameras prior to selecting a permanent
mounting location by temporarily connecting the
Cameras and Cables to the System.
Cameras with 6 Pin DIN connections draw
power from the Observation System or DVR.
Additional power adapters are not needed for
these cameras.
Infra-Red
LEDs
Camera
Lens
Microphone
Adjustable
Stand
DIN Input
Cable
DIN to BNC System Connection Diagram:
Loading...