Lorex SG620F Quick Start Manual

SIMULATED (DUMMY) DOME CAMERA

WITH FLASHING LED

Installation Manual

Contents

Dummy Camera (x1)

Mounting Screws (x2)

ATTENTION: THIS IS NOT A REAL CAMERA. It is only meant for theft deterrence.

Features

• Realistic imitation CCTV

Security Camera*

• Flashing LED activates with a

Installation Instructions

1) Remove battery cover (Figure 1).

2) Insert two AA batteries (not included). Ensure battery polarities match

(Figure 2).

3) Close battery cover. Battery cover snaps shut (Figure 3).

4) Press the top of the dome to activate blinking LED (Figures 4 & 5).

5) LED blinks until you press the top of the dome again.

6) Mark two screw holes onto the wall or ceiling using the included

mounting template.

7) Fasten the two drywall anchors into the wall or ceiling.

8) Fasten the two mounting screws into the drywall anchors 3/4 of the way.

9) Align the screw holes on the base of the dome camera with the screws

on the wall or ceiling (Figure 6).

10) Twist dome camera counter-clockwise to fasten (Figure 6).

MODEL:

SG620F

single press on the dome

• Indoor and outdoor use**

Battery life

• 4 months average

Product Care

• Clean dome cover with damp

cloth as needed

• Remove batteries if not in use

for prolonged periods

*Lorex Technology Inc. assumes no liability with the use of imitation security products.

**Install camera in a sheltered area away from extreme heat or moisture.

www.lorexcctv.com

English Version 1.0

Drywall Anchors (x2)

Mounting Tem

late (x1)

Specifications and Main Features