Lorex SG4933R Owner's Manual

MODEL SG4933R
1/4” CCD COLOR WEATHERPROOF BULLET CAMERA

CAMERA

BRACKET

THIS PACKAGE CONTAINS:

1 - Color Weatherproof Bullet

Camera with finished leads

VIDEO EXT. CABLE

12 V AC POWER
SUPPLY

POWER EXT. CABLE

RCA/BNC CONNECTOR

RCA/6 PIN COUPLER

RCA/RCA ADAPTERMETAL MOUNTING

1 - Metal Mounting Bracket
1 - RCA/BNC Connector (used only

when connecting camera to

a monitor with BNC ends)
1 - 12 V AC Power Supply
1 - 65 Ft Video Extension Cable
1 - 65 Ft Power Extension Cable
1 - RCA/RCA Adapter
1 - RCA/6 Pin Coupler
1 - Owners Manual
1 - Warranty Card

OWNERS MANUAL

Connecting Camera to a TV or VCR

1. Mount the camera to ceiling or other desired mounting surface

2. Connect the 65 ft video extension cable to the camera end marked ‘Video’

3. Connect the 65ft power extension cable to the camera end marked ‘+12V’

4. Run the 65 ft extension cable and power extension cable to the television (or VCR)
which you will use for viewing camera location

5. Attach one end of the supplied RCA/RCA connector to the extension cable,
the other end to the television (or VCR)

6. Connect the supplied 12Volt AC power supply to the power extension cable

7. Turn your television (or VCR) to auxiliary (AUX) or video mode to view
camera

8. Adjust the camera to the desired angle for viewing the camera

Connecting Camera to a LOREX Observation System

1. Mount the camera to ceiling or other desired mounting surface

2. Connect the 65 ft video extension cable to the camera end marked ‘Video’

3. Connect the 65ft power extension cable to the camera end marked ‘+12V’

4. Run the 65 ft video extension cable and power extension cable to the Lorex Monitor

5. Attach the RCA end of the RCA/6 pin coupler to the video extension cable, the other
end to one of the camera inputs at the back of the Lorex Monitor

6. Connect the supplied 12Volt AC power supply to the power extension cable

7. Turn your Lorex observation monitor on to view camera location

8. Adjust the camera to the desired angle for viewing the camera

SPECIFICATIONS

Image Device 1/4” CCD Image sensor

510 H x 492 V picture elements
Scanning System 2:1 Interlace
Resolution Horizontal 380 TV lines
Shutter Control Auto 1/60 - 1/100,000
Electronic Shutter Built-In
Lens 3.6 mm lens
Minimum Illumination 1.0 Lux (F: 2.0)
Outputs/Connections Video-RCA, Power DC Jack
Power Requirement 12V DC Adapter (included)

Operating Temperature 14°F - 122°F

Weight 6 oz
Dimensions 3 1/8”(W) x 3/8” (H) x 3/8” (D)
Housings Black - Aluminum

Distributed Lorex Technology Inc

300 Alden Road, Markham, Ontario Canada L3R 4C1

Tel: [phone] Fax: [phone]

FOR MORE INFORMATION: www.lorexcctv.com

Because our products are subject to continuous improvement, SVC reserves the right to modify product designs and

specifications without notice and without incurring any obligation. E. & O.E.