Lorex LNR200 Reference Guide
netHD LNR200 Series Quick Connection Guide - English - R1
Quick Connection Guide
netHD LNR200 Series
Network Video Surveillance Recorder
30 Minutes
PACKAGE CONTENTS:
Network Video Recorder
Remote control
HDMI cable
Quick Start Guides
Power cable
Ethernet cable
(includes software
and manual)
USB mouse
CD
Connecting your system
Cameras* Monitor/TV* Router* Mouse Power
Ethernet Extension Cable*
21 3 5
4
It’s all on the Web
www.lorextechnology.com
Information in this document is subject to change without
notice. As our products are subject to continuous
improvement, Lorex Technology Inc. and our subsidiaries
reserve the right to modify product design, specifications and
prices, without notice and without incurring any obligation.
E&OE © 2013 LOREX. All rights reserved.
NOTE: It may take up to
1 minute for cameras to start up
and transmit video to your NVR.
*Not included/sold separately
HDMI
OR
VGA*
ON
netHD LNR200 Series Quick Connection Guide - English - R1
Using the Mouse Setting the Date & Time Searching & Playing Back Video
1: Left-click:
• Select a menu option
• During live view:
• Click on a camera to bring up the
Camera Toolbar.
• Double-click on a channel to view
in full-screen; double-click again to
return to split-screen view.
2: Right-click: Open the Quick
Menu or exit menus.
Quick Connection Guide
1. Right-click to open the Quick Menu and then click
Menu.
1 2
2. Click Configuration.
3
3.
a.
b.
c.
netHD LNR200 Series
Network Video Surveillance Recorder
1. Right-click to open the Quick Menu and then click
Menu.
2. Select Playback.
3.
a.
b.
c.
30 Minutes
3: Scroll wheel: During live view, scroll up / down to
change channel.
Quick Menu Overview
Right-click to open the Quick Menu.
Open the Main Menu.
Select a split screen layout.
Select the previous channel or group
of channels.
Select the next channel or group of
channels.
Open Playback Mode for the currently selected channel.
Choose color output mode for the
monitor.
Access system information.
a. Select your Time Zone from the dropdown menu.
b. Click Date Format and use the on-screen calendar to
enter the Date.
c. Click System Date and click arrows to enter the
Time.
4. Click Apply.
It is important to set the correct time to assure accurate
time stamps on video recordings.
a. Under IP Camera, check the cameras you would
like to search for video.
b. Under Start Time, select the start time for your
search. Click on the left to select the start date. Click
on the right to adjust the start time.
c. Under End Time, select the end time for your search
in the same way that you selected the start time.
Click Playback to start playback from the earliest
4.
available footage in your selected time range.
1-19022013
Loading...