Lorex LNR400 Series, LNR100 Series, LHV1000 Series Quick Mobile Manual

1C

Quick Mobile Guide

Android

e

f

Tap Connect. You will be prompted to change the NVR
password.

g

Enter a new 6 character password and tap OK. This password
will be used to log on to your system from now on.

The app opens in Live View and streams video from all
connected cameras.

Before You Start:

• Make sure you have a router and
high-speed Internet access (not
included).

LNR400 Series

d

Configure the following:

iPhone

1A

Congratulations! You can now view video from your cameras on your smartphone or tablet.

3 Minutes

iPad

c
d

Configure the following:

1

2

3

4

5

e
f

g

Install the free FLIR Cloud™ app from the App Store.
Tap the FLIR Cloud™ icon to open the app.

a

b

Tap Start Scanning and line up the
QR code on the top of the NVR using the
camera on your iPad.

OR under Device ID, manually enter the
Device ID printed on the label.

Name: Choose a name for your NVR of
your choice.

Client Port: Enter the Client Port
(default: 35000).

User Name: Enter the NVR’s User
Name (default: admin).

Password: Enter the NVR’s Password
(default: 000000).

Channel amount: Enter the number of

channels your NVR has (for example 4, 8,
or 16).

1B

• Connect your NVR to your router
using an Ethernet cable (see the
Quick Connection Guide for details).

• Upgrade your NVR firmware and
client software or mobile app to the
latest versions.

• Please note that an upload speed of
1Mbps is required for remote video
streaming. Up to 3 devices may
connect to the system at the same
time.

1

2

3

4

Tap Scan QR Code and line up the QR code on
the top of the NVR using the camera on your phone
or tablet.

OR under Device ID, manually enter the Device ID
printed on the label.

Name: Choose a name for your system of your
choice.

Client Port: Enter the Client Port
(default: 35000).

Username: Enter the NVR’s User Name
(default: admin).

Password: Enter the NVR’s Password
(default: 000000).

1

3

4

5

2

EXAMPLE

EXAMPLE

5

e

f

Tap Connect. You will be prompted to change the NVR
password.

g

Enter a new 6 character password and tap OK. This password
will be used to log on to your system from now on.

The app opens in Live View and streams video from all
connected cameras.

d

Configure the following:

1

2

3

4

Tap Scan QR Code and line up the QR code on
the top of the NVR using the camera on your iPhone.

OR under Device ID, manually enter the Device ID
printed on the label.

Name: Choose a name for your system of your
choice.

Client Port: Enter the Client Port
(default: 35000).

Username: Enter the NVR’s User Name
(default: admin).

Password: Enter the NVR’s Password
(default: 000000).

1

3

4

5

2

EXAMPLE

5

Tap Add.

Tap Start Live View. You will be prompted to change the
NVR password.

Enter a new 6 character password and tap OK. This password
will be used to log on to your system from now on.

The app opens in Live View and streams video from all
connected cameras.

Tap

Then tap

6

1

2

3
4
5
6

Device ID: xxxxxxxxxxx

Device ID: xxxxxxxxxxx

Device ID: xxxxxxxxxxx

Install the free FLIR Cloud™ app from the App Store.
Tap the FLIR Cloud™ icon to open the app.

a

c

b

Tap

Then tap +

Tap Sign up and enter your email address and password to
create a new account.

Install the free FLIR Cloud™ app from the Google
Play Store. Tap the FLIR Cloud™ icon to open the
app.

a

c

b

Tap

Then tap +

Tap Sign up and enter your email address and password to
create a new account.

Find your Device ID

Record your information below:

DEVICE ID:

Quick

Reference

Default access information:

• Default user name: admin

• Default password: 000000

Default system ports:

• HTTP Port: 80

• Client Port: 35000

Information in this document is subject to change without notice. As our products are subject
to continuous improvement, Lorex Corporation and our subsidiaries reserve the right to
modify product design, specifications and prices, without notice and without incurring any
obligation. E&OE © 2015 LOREX. All rights reserved.

lorex.ca/LNR400

It’s all on the Web

Need Help?

Visit www.lorextechnology.com/support

LNR400_SERIES_QNG_EN_R2

If you have forgotten your

password, contact

Lorex technical support.

2

b

• PC Users: Download and install the Client
Software for PC from lorex.ca/LNR400.

• Mac Users: Download and install the Client
Software for Mac from lorex.ca/LNR400. Double
click to extract the software. Then, drag the
software to Applications.

a

Once installation is finished, double-click the FLIR
Cloud Client™ icon ( ) on the desktop or

Applications list.

e

1

2

3
4

5

Enter the following information:

3

Connecting on PC or Mac

Quick PC/MAC Guide

Congratulations! You can now connect over the Internet to view
and playback video on your computer.

15 Minutes

The Device ID is printed on a label on the top panel of the NVR.

See the label on top of

your NVR for your

Device ID.

NOTE: PC/Mac setup is

not required to connect on
a smartphone or tablet.
See reverse for
smartphone/tablet setup.

Scan the QR code or visit the address below to access

the latest software and instruction manuals.

c

Log into the Client Software using the Client Software
user name (default: admin) and password (default:
admin) and then click Login.

d

Device Name: Choose a name for your system of your choice.
Device ID: Manually enter the Device ID printed on the label.
Client Port: Enter the Client Port (default: 35000).
User Name: Enter the NVR’s User Name

(default: admin).
Password: Enter the NVR’s Password

(default: 000000).

f

You will be prompted to change the NVR
password. Click OK.

g

Enter a new 6 character password and tap
OK. This password will be used to connect to
your system from now on.

h

Click then .

i

Click and drag Default Group to the display
window to open your cameras in live view.

User Name: admin
Password: admin

Click Add Device

1

2
3
4
5

Click Add

EXAMPLE

Download and install the client software.

Device ID: xxxxxxxxxxx