Lorex LNK7000X User Manual

Quick Networking Guide

LNK7000X Series

HD Network Video Surveillance Recorder

• Make sure you
have a router
and high-speed
Internet access
(not included).

2

1

Find Your Device ID

The Device ID is printed on a label on the top panel of the NVR.

Before You Start:

• Connect your NVR
to your router
using an Ethernet
cable (see the
Quick Connection
Guide for details).

• Upgrade your NVR
firmware and client
software or mobile
app to the latest
versions.

• Please note that an upload
speed of 3.5 Mbps is
required for remte video
streaming. Up to 3 devices
may connect to the system
at the same time.

2

Install the free Lorex Cirrus app

a

from the App Store or Google
Play Store.

Tap the Lorex Cirrus icon to open

b

the app.

Tap to open the menu. Tap Devices, then tap

c

Add.

Enter the following:

d

A

B

C

D

E

Smartphone / Tablet Setup

Live video from your security system will appear on

e

the app. Double-tap one of the channels to see video
from a single camera.

Live View Overview:

Configure settings

for selected channel

Select channels

Main menu

F

Channel name
Date and time

stamp

for live viewing
from all
connected
devices

Record your information below:

DEVICE ID:

Copyright © 2018 Lorex
Corporation
As our products are
subject to continuous
improvement, Lorex
reserves the right to
modify product design,
specifications and
prices, without notice
and without incurring
any obligation. E&OE. All
rights reserved.

Device ID: xxxxxxxxxxx

Need Help?

Visit us online for up-to-date

software and complete

instruction manuals

1

Search for the model number of your product

2

Click on your product in the search results

3

4

Visit lorex.com

Click on the Downloads tab

Ensure Device ID is selected.

A

Tap to scan the QR

B

code on the top of
your recorder using
the camera on your
mobile device.

C

Ensure the Client Port reads 35000.
Enter the username (default: admin).

D

Enter the the secure password you recorded on the Quick

E

Connection Guide

F

Tap Save.

Troubleshooting

If you are having trouble connecting, try the following:

• Restart the NVR by disconnecting the power adapter, then
reconnecting it.

• Ensure the NVR is connected to the router using an Ethernet cable
and then restart the NVR.

• Double-check the Username, Password, and Client Port.

• Ensure your NVR has the latest firmware.

• Ensure your mobile app is up-to-date.

Split-screen

Save a

snapshot of

the current live

NOTE: For complete app instructions, see the Lorex Cirrus

instruction manual on your product page at lorex.com

view

Tap to start

manual recording;

tap again to stop

Tap to switch to full HD

video quality; tap again for

reduced video quality that

is optimized for streaming

options

Tap to enable
the camera’s
intercom; tap
again to stop

Tap to switch

between muted

and unmuted

Quick Reference

Default access information:

• Default user name: admin

• Default password: 00000000

Default system ports:

• HTTP Port: 80

• Client Port: 35000

See the label on top of your
DVR for your Device ID

If you have forgotten your
password, contact Lorex
technical support.

LNK7000X_QNG_EN_R1