Page 1
IPSC1240P
Information in this document is subjec t to change without no tice. As our products are subject to continu ous improvement, Lorex Technology and our sub sidiaries reserve the right to
modify product design, specifications a nd prices, without not ice and without incurr ing any obligation. E& OE © 2006 LOREX. All r ights reserved.
WWW.LOREXINTERNATIONAL.COM
Step 1 should take approximately 5-10 minutes
10:00
SETTING UP YOUR SYSTEM
System Contents
1 - Color Camera
1 - Power Supply
1 - Camera Stand (with screws)
1 - Ethernet Cable
1 - Quick Setup Guide
1 - Lorex Application Software CD
Step 1 - Set Up Your Camera First
Connect one end of the ethernet
cable to the color camera
1
Power Supply
Not Included: Broadband Router & Computer
Connect the other end of the ethernet cable
to your broadband router (not included)
2
Connect the 12V AC power supply to
the color camera and electrical outlet
3
Color Camera Ethernet Cable
* This set-up guide is intented for users using Internet Explorer as their Internet browser
Page 2
IPSC1240P
Information in this document is subjec t to change without no tice. As our products are subject to continu ous improvement, Lorex Technology and our sub sidiaries reserve the right to
modify product design, specifications a nd prices, without not ice and without incurr ing any obligation. E& OE © 2006 LOREX. All r ights reserved.
WWW.LOREXINTERNATIONAL.COM
Insert the LOREX Application Software in to the computer’s CD-ROM
1
Select the Lorex IP EDIT Option
2
Single click on the item listed under ‘Monitor Lists’ to set up Local
Viewing Settings
Record the IP and MAC Addreses below
3 4
Step 2 - Set Up Local Viewing On Your PC - Second
SETTING UP YOUR SYSTEM
IP ADDRESS : 192 . 168 . 45 . 39
MAC ADDRESS : 00 69 70 63 6D 22
(record the period.
It is part of the IP Address)
(DO NOT record the colon (:))
NOTE: Active X must be enabled to set up the system. If it is
already set up on your computer proceed to Step 6, otherwise
proceed to Step 5.
NOTE: Double click
here to automatically
set viewing settings
Step 2 should take approximately 15-20 minutes
20:00
Page 3
IPSC1240P
Information in this document is subjec t to change without no tice. As our products are subject to continu ous improvement, Lorex Technology and our sub sidiaries reserve the right to
modify product design, specifications a nd prices, without not ice and without incurr ing any obligation. E& OE © 2006 LOREX. All r ights reserved.
WWW.LOREXINTERNATIONAL.COM
Step 2 - Set Up Local Viewing On Your PC - Second (Continued)
Third, set the security level to run Active X by clicking the
Security Tab
Fourth, select the ‘Custom Level’ button. Next enable Active X in the Security
Settings window followed by pressing the OK button
Enable Active X. First open your web browser to enable Active X. Click
tools and select Internet Options
5a
Second, click the Settings button in the Check for Newer Versions of Stored
Pages option and check ‘Automatically’ followed by OK.
5b
5c 5d
SETTING UP YOUR SYSTEM
Click “Tools” and
select “Internet
Options”
NOTE:
Click the
Security
tab
NOTE: Fourth, select
the ‘Custom Level’
button
NOTE: Finally,
enable all
Active X settings in the
security settings window
followed by
pressing the
OK button
Page 4
IPSC1240P
Information in this document is subjec t to change without no tice. As our products are subject to continu ous improvement, Lorex Technology and our sub sidiaries reserve the right to
modify product design, specifications a nd prices, without not ice and without incurr ing any obligation. E& OE © 2006 LOREX. All r ights reserved.
WWW.LOREXINTERNATIONAL.COM
FOR ADVANCED VIEWING OPTIONS, REFER TO YOUR OWNERS MANUAL. TO SET UP THE INTERNET REMOTE MONITORING OPTION,
PROCEED TO STEP 3.
Step 2 - Set Up Local Viewing On Your PC - Second (Continued)
Open the Web Browser. Enter on the Address Bar the IP Address
entered in Step 4 to view the picture
6
NOTE: Enter your
camera’s IP Address
you recorded in Step 2
Section 4
SETTING UP YOUR SYSTEM
Page 5
IPSC1240P
Information in this document is subjec t to change without no tice. As our products are subject to continu ous improvement, Lorex Technology and our sub sidiaries reserve the right to
modify product design, specifications a nd prices, without not ice and without incurr ing any obligation. E& OE © 2006 LOREX. All r ights reserved.
WWW.LOREXINTERNATIONAL.COM
1
Open your web browser. Enter ddns.strategicvista.net in the Address Bar
2
Step 3 - Set Up Internet Remote Monitoring - Third
SETTING UP YOUR SYSTEM
Port Forward your router to the IP recorded in Step 2.4 [PORT 80]
All Routers are different. To Port Forward your router
a. Refer to your Router’s manual for specific instructions on port
forwarding (or)
b. Check the Router configuration guide support document in the
consumer guide section on our website for information on Port Forwarding http://lorexstore.lorextechnology.com/uploads/PortFor-
ward_Guide.pdf
C. Select and print the Router Configuration Guide on your CD
http://ddns.strategicvista.net
Click the Create Account Option
3
Create Account
Complete New Account Information
4
A
B
C
A. Select IPSC1240
option from the drop
down menu
B. Enter your computer’s
MAC Address recorded
in Step 2, Part 4
C. Create your Unique URL
Name (this name will be
used) (eg. Johndoe). Note:
An URL name should not
be more than 8 characters.
Step 3 should take approximately 20-40 minutes
40:00
Page 6
IPSC1240P
Information in this document is subjec t to change without no tice. As our products are subject to continu ous improvement, Lorex Technology and our sub sidiaries reserve the right to
modify product design, specifications a nd prices, without not ice and without incurr ing any obligation. E& OE © 2006 LOREX. All r ights reserved.
WWW.LOREXINTERNATIONAL.COM
5
Open your web
browser and
enter the
camera’s
IP address
6
Step 3 - Set Up Internet Remote Monitoring - Third (Continued)
SETTING UP YOUR SYSTEM
Click the Configuration option
7
Click the DDNS
option
8
Print and Save the Automated Email Registration information
Service Provider: ddns.strategicvista.net
Domain name: house.strategicvista.net
User name: John Doe
Password: <leave this field blank>
Use Public IP to Register: Yes
NOTE: Enter the
IP Address you
recorded in Step 2
Section 4
Page 7
IPSC1240P
Information in this document is subjec t to change without no tice. As our products are subject to continu ous improvement, Lorex Technology and our sub sidiaries reserve the right to
modify product design, specifications a nd prices, without not ice and without incurr ing any obligation. E& OE © 2006 LOREX. All r ights reserved.
WWW.LOREXINTERNATIONAL.COM
9
Open your Web Browser & enter your Domain Name to view the
picture remotely
10
Step 3 - Set Up Internet Remote Monitoring - Third (Continued)
SETTING UP YOUR SYSTEM
Enable Network Surveillance option. Enter your User Name and
Domain Name
1. Enable: Click on the Radio Button (circle)
2. UserName: Enter the user name from your Confirmation of
Registration Email
3. Password: <leave blank>
4. DomainName: Enter the domain name from your confirmation
of registration email.
5. Make sure the interval is set to 15 minutes
6. Click Submit
NOTE: Please allow 15 minutes for your entries to be registered.
NOTE: Enter your
Domain Name (i.e
john.strategicvista.
net) to View
Picture.
It’s all on the web
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Updates
Firmware Upgrades
For additional information or troubleshooting help, refer to your owners
manual for assistance. you can also call or email for further support.
Toll Free Technical Support: 00-800- 4256- 7390
Email Support: info@svclhk.com
Website: www.lorexinternational.com
Loading...