Lorex DV700 Series, LHV0000 Series, LHV2000FS Series Quick Connection Manual
Package Contents
Connecting your System
MPX HD Digital Video Surveillance Recorder
DV700 Series
30 minutes
MPX DVR
HDMI Cable
Quick Start Guides
Power Adapter
Ethernet Cable
USB Mouse
Quick Connection Guide
Information in this document is subject to change without
notice. As our products are subject to continuous improvement,
Lorex Corporation and our subsidiaries reserve the right to
modify product design, specifications and prices, without
notice and without incurring any obligation. E&OE © 2016
LOREX. All rights reserved.
Need Help?
Visit www.lorextechnology.com
Search the model number of your product
Visit us online for up-to-date software and
complete instruction manuals.
Click on your product in the search results
Click on the Downloads tab
1
1
1
2
1
3
1
4
*Not included/sold separately
1
4
3 5
Cameras**Monitor/TV* Router*
Mouse
Power
2
!
DV700FS_SERIES_QCG_EN_R1
Extension Cable*
The extension cable must
be a single stretch of cable
between the DVR and camera.
You cannot connect multiple
extension cables to each other.
8 channel configuration shown. 4/16 channel will have the respective number of video inputs. For camera compatibility information,
visit www.lorextechnology.com/support.
Firmware Update
This system features automatic firmware upgrades
for enhanced functionality. It is required
to upgrade your system to the latest
firmware version.
If a firmware upgrade is available:
1. After startup, a notification will appear
asking you to upgrade the firmware. Click OK to
upgrade.
2. The system will download and install the
firmware upgrade. Wait for the firmware update
to complete. The system may restart during the
firmware upgrade process.
Important: Do not power off or
disconnect the power cable during
firmware installation.
Beeping
If the system is beeping after startup, the Ethernet
cable may not be connected or the system may
not be connected to the network.
To stop the beeping:
1. Connect an Ethernet cable from the system to
your router. OR
2. Right click and click Disable Beep.
Remote Control
HDMIVGA*
OR
For the best video output
this DVR can provide, you
must use it with a
monitor/TV that supports
1080p resolution (or
above).
6: ON
**Cameras are included only with bundled systems. Stand-alone systems do not include cameras.
***Product image might appear different than the actual product.
***
DV700FS_SERIES_QCG_EN_R1.indd 1 9/19/2016 2:49:46 PM
Right-click to open the Quick Menu.
Using the Mouse
Search & Playback
1
2
Using the Quick Menu
1. Left-click:
• During split-screen display mode: Click an
individual channel to view it in full-screen. Click
again to return to the split-screen display mode.
• While navigating menus: Click to open a
menu option.
2. Right-click:
• During live view: Right-click anywhere on the
screen to open the Quick Menu.
• Within system menus: Right-click to exit
menus.
30 minutes
MPX HD Digital Video Surveillance Recorder
DV700 Series
Quick Connection Guide
Select camera/live display view
Control PTZ cameras (not included)
Adjust camera color settings
View system information
Start/stop sequence mode
Search and playback recordings
Open manual recording controls
Open Main Menu
Disable current audible warning
Setting the Date and Time
In live view, right-click and click Main Menu.
Log in using the system user name (default: admin) and
password (default: 000000).
Click Apply to save changes.
Enter the current time and
select your time zone,
and click OK
1.
2.
4.
3.
It is important to set the correct time to ensure accurate time
stamps on video recordings.
Click GENERAL and select the Date&Time tab.
Check DST to enable auto
Daylight Savings Time
updates
(Optional) Check NTP
to sync your system with
an Internet time server.
Click Manual Update to
instantly update the time
NOTE: A constant Internet
connection is required to
use NTP
5.
From live view, right-click and then click Search.
Log in using the system user name (default: admin)
and password (default: 000000).
Use the calendar on the right to select the date to
playback.
Use the drop-down menus to select the channels you
would like to playback. Click the display options
( ) to playback multiple channels simultaneously.
Click inside the video bar to select the playback time.
Playback starts immediately at the selected time.
1.
2.
4.
3.
5.
Click inside the bar to select a
playback time.
Select the day
to playback
Select channels
to playback
DV700FS_SERIES_QCG_EN_R1
Click and
select SETTING
Quick Access to System
Information
To quickly open a window that displays vital system
information such as device ID, firmware version, device IP
address, etc.:
• Press the ENTER button on the front panel.
(OR)
• Right-click to open the Quick Menu and click Info. If prompted,
enter the system user name (default: admin) and password (default:
000000).
Note: In live view, hover the mouse cursor over the
bottom of the screen to open the Navigation Bar.
Move the mouse cursor away from the bottom of
the screen to close the navigation bar.
DV700FS_SERIES_QCG_EN_R1.indd 2 9/19/2016 2:49:46 PM
Loading...