Lorex CVC6940 SERIES Quick Start Manual
QUICK START GUIDE
www.lorexcctv.com
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
www.lorexcctv.com
VISIT:
Lorex Technologies Inc.
Copyright © 2009 Lorex Technologies Inc.
As our products are subject to continuous
improvement, Lorex reserves the right to
modify product design, specifications and
prices, without notice and without incurring
any obligation. E&OE
It’s all on the Web!
Copyright © 2009 Lorex Technology Inc.
Camera Specifications
INDOOR / OUTDOOR
COLOR CAMERA
with Night Vision
Dimensions
Image Sensor 1/4” Color
Lens / Lens Mount
Video Format / Pixels
Horizontal Resolution
Minimum Illumination
Termination
IR / Night Vision Range
FOV (diagonal)
S/N Ratio
Sync. & Scan. Systems
Video Output
Power Consumption
NTSC: 640(H) x 480 (V)
420 TVL
0.6 LUX @ F1.2 (IR off)
0 LUX (IR LEDs on)
Video: BNC Female
Power: Barrel Female
18 IR LED/850nm/50’ (15m)
50 Degrees
> 48dB
Internal; 2:1 Interlace
Comp. 1.0 Vpp @ 75ohm
170 mA or 2W max
Operating Temp.
Dimensions
LxWxH
(with sunshade)
-4°F ~ 122°F
(-10°C ~ 50°C)
3.9" x 2.7" x 3.2"
100 mm x 68 mm x 80 mm
5.0 mm F2.8/ Fixed
Iris & Shutter Speed AES; 1/30 ~ 1/62,500 sec.
Power Requirement 12V DC ±10%
Weight (with stand) 10.4 oz. / 294.8 g
MODEL: CVC6940 SERIES
English Version 3.0
4. Connect the BNC end of the 60ft Extension Cable
to the DVR / Observation System or to a TV/VCR:
Note:
Connect the BNC-to-RCA Adapter as needed to
allow for proper connectivity.
5. Connect the A/C Power Adapter to the 60ft
Extension cable (Black connector). Plug the
Power adapter to a wall outlet.
Figure 3.0 Connect the BNC cable to a DVR, CCTV, monitor or TV
ATTENTION: This camera includes a Auto Mechanical IR Cut
Filter. When the camera changes between Day/Night Lighting, an
audible clicking noise may be heard coming from the camera. This
clicking is normal, and indicates that the camera filter is working.
Figure 4.0 Connect an AC power adapter
AC Power Adapter
4-in-1 Power Adapter
(optional)
Contents Installing the camera
60 ft. BNC/Power
Extension Cable*
BNC to RCA Adapter*
Indoor / Outdoor Color
Camera with Night Vision*
To install the camera:
1. Mount the camera stand to the desired mounting
surface.
2. Attach the camera to the stand at either of the two
connection points.
3. Connect the 60ft Extension cable to the camera:
ATTENTION - Test the camera prior to selecting a permanent
mounting location by temporarily connecting the cameras and
cables to a TV, DVR, or Observation System.
Figure 1.0 Use the stand for wall, table, or ceiling mounting
Wall & Table Mount
Ceiling Mount
BNC (VIDEO)
(Yellow Connector)
POWER
(Black Connector)
To Camera:
Connect the BNC and
power connectors to the
camera.
Figure 2.0 Connect the BNC and power ends of the extension cable
Connect the BNC connector
to the video input of the
monitor/DVR, and connect
the power connector to a
power adapter.
To Monitor/DVR:
Features
• Auto Mechanical IR Cut Filter ensures accurate
color reproduction in all lighting conditions
• Enhanced Night Vision Capability - up to 50ft /
15m†
• Durable Weatherproof Indoor/Outdoor camera
(IP66)‡
• Easily connects to any TV, VCR, or DVR
• Ceiling or wall mountable
† IR illumination range of 50 ft (15m) under ideal conditions. Objects at, or
beyond this range may be partially or completely obscured, depending on the
camera application.
‡ Not recommended for submersion in water.
WARNING - A REGULATED UL/CSA APPROVED 12V DC 300mA
power supply is REQUIRED for use with this camera. Use of a nonregulated, non-conforming power supply can damage this product
and will void the warranty.
Mounting Bracket / Stand*
Connecting the camera
Setup Diagram:
AC Power Adapter**
* Model CVC6940PK4 is a 4-pack that includes four of the listed items.
** A "4-in-1" Power Adapter that provides power to four cameras may be
substituted for four individual power adapters, depending on product
configuration.
Loading...