Lorex CVC6930 Quick Start Manual

Camera Specifications

Image Sensor 1/4” Color

Lens / Lens Mount

Video Format / Pixels

Horizontal Resolution

Minimum Illumination

Termination

IR / Night Vision Range

FOV (diagonal)

S/N Ratio

Sync. & Scan. Systems

Video Output

Power Consumption

NTSC: 640(H) x 480 (V)

420 TVL

0 LUX (IR LEDs on)

Video: BNC Female
Power: Barrel Female

18 IR LED/40 ft. / 12 m

64 Degrees

> 48dB

Internal; 2:1 Interlace

Comp. 1.0 Vpp @ 75ohm

170 mA or 2W max

Operating Temp.

Dimensions
WxLxH
(with stand)

-14°F ~ 122°F
(-10°C ~ 50°C)

2.6" x 4.2"" x 5.2"
66 mm x 107 mm x 132 mm

3.6 mm F1.8/ Fixed

Iris & Shutter Speed AES; 1/30 ~ 1/62,500 sec.

Power Requirement 12V DC ±10%

Weight (with stand) 0.6 lbs. / 0.26 kg

IT’S ALL ON THE WEB!

Product Information

User Manuals

Quick Start Guides

Specification Sheets

Software Upgrades

Firmware Upgrades

INDOOR / OUTDOOR

COLOR CAMERA

with Night Vision

MODEL: CVC6930 SERIES

Dimensions

VISIT

www.lorextechnology.com

Lorex Technologies Inc.
Copyright © 2010 Lorex Technologies Inc.
As our products are subject to continuous
improvement, Lorex reserves the right to
modify product design, specifications and
prices, without notice and without incurring
any obligation. E&OE

QUICK START GUIDE

English Version 2.0

www.lorextechnology.com

Figure 3.0 Connect the BNC cable to a DVR, CCTV, monitor or TV

ATTENTION: This camera includes a Auto Mechanical IR Cut

Filter. When the camera changes between Day/Night Lighting, an
audible clicking noise may be heard coming from the camera.
This clicking is normal, and indicates that the camera filter is
working.

Figure 4.0 Connect an AC power adapter

AC Power Adapter

4-in-1 Power Adapter
(optional)

Contents Installing the camera

ATTENTION - Test the camera prior to selecting a permanent

mounting location by temporarily connecting the cameras and
cables to a DVR, or Observation System.

Figure 1.0 Use the stand for ceiling, table, or wall mounting.

Wall Mount

Ceiling Mount

Table Mount

BNC (VIDEO)

(Yellow Connector)

POWER

(Black Connector)

To Camera:

Connect the BNC and power
connectors to the camera.

Figure 2.0 Connect the BNC and power ends of the extension cable

Connect the BNC connector
to the video input of the
monitor/DVR, and connect
the power connector to a
power adapter.

To Monitor/DVR:

Connecting the camera

Indoor / Outdoor Color
Camera with Night Vision*

Mounting Stand*

60 ft. BNC/Power
Extension Cable*

AC Power Adapter**

WARNING - A REGULATED UL/CSA APPROVED 12V DC 300mA power

supply is REQUIRED for use with this camera. Use of a non-regulated,
non-conforming power supply can damage this product and will void
the warranty.

* Model CVC6930PK4 is a 4-pack that includes four of the listed items.
** A "4-in-1" Power Adapter that provides power to four cameras may be
substituted for four individual power adapters, depending on product

configuration.

To install the camera:

1. Mount the camera stand to the desired mounting
surface.

2. Attach the camera to the stand at either of the two
connection points.

3. Connect the 60ft Extension cable to the camera:

4. Connect the BNC end of the 60ft Extension Cable
to the DVR / Observation System or to a TV/VCR:

NOTE: Connect a BNC-to-RCA Adapter (optional, Lorex
model # BNCB) as needed to allow for proper
connectivity.

5. Connect the A/C Power Adapter to the 60ft
Extension cable (Black connector). Plug the Power
adapter to a wall outlet.

Features

• Auto Mechanical IR Cut Filter ensures accurate color
reproduction in all lighting conditions

• Special IR LED's do not glow red in the dark for covert
night vision operation

• Enhanced Night Vision Capability - up to 40 ft. / 12 m†

• Weatherproof Indoor/Outdoor camera (IP66)‡

• Ceiling or wall mountable

† IR illumination range of 40 ft. (12 m) under ideal conditions. Actual range and clarity may
vary depending on scene/object reflection and camera application.

‡ Not intended for submersion in water. Installation in a sheltered location
recommended.

Setup Diagram: