Lorex Battery Quick Start Manual

Align the metal
contact points to the
connector inside
the camera base.

This side faces up.

Connect the
power adapter
into the DC5V port

Charging indicator

Remove battery cover from camera base.

How To Install The Battery

www.lorextechnology.com

The camera base has a built-in battery
compartment where you can install
rechargeable and non-rechargeable
batteries. This may be useful if you want
to temporarily monitor an area with no
power outlets.

Installing a rechargeable battery

pack

To install an optional battery pack,
order the battery from Lorex
(part # ACC241BATT) . Regular
rechargeable batteries cannot be
charged in the camera base.

To install the rechargeable battery
pack:

1 Remove the battery cover and insert the

rechargeable battery pack in the battery
compartment. Replace the battery cover.

2 Plug the power adapter into a power

outlet.Connect the end of the power
adapter into the camera base. Allow the
camera to charge for 4.5 hours.

NOTE: The Charge LED indicator glows

to indicate the battery is
charging.

Installing non-rechargeable AA

batteries

You can install regular AA Alkaline
batteries (non-rechargeable) into the
camera’s battery compartment.

To install regular AA batteries in the
camera:

1 Unplug the power cord from the base of

the camera.

2 Remove the battery cover.

3 Insert four AA batteries into the battery

compartment and replace the battery
cover.

Copyright © 2011 Lorex Technology