Lorell 60115 Assembly Instruction Manual

Model Number 60115

Assembly Instruction

Carefully unpack all parts and identify them with the parts list before
attempting to assemble.

IMPORTANT: DO NOT TIGHTEN BOLTS AND SCREWS UNTIL YOU
HAVE COMPLETED ASSEMBLY.

1. Put the 5 CASTERS (A) into the holes on the 5 STAR BASE (B).

2. Insert the GAS LIFT (C) to the center hole top of the 5 STAR BASE (B).

3. Insert the BELLOW (D) over the GAS LIFT (C).

4. Attach the BACK CUSHION (I) to the SEAT CUSHION (G) by
positioning BACK SUPPORT PLATE (J) with 4 SCREWS (E) using
ALLEN KEY (K).

5. Attach both the left and right ARMRESTS (H) to the SEAT CUSHION (G)
and BACK CUSHION (I) by using the 8 SCREWS (E) with 8 CAPS (O).

6. Attach the assembled seat unit onto the gas lift by insert the top of the
gas lift into the steel plate hole located on the underside of the seat
cushion.

7. Be sure that all screws are fully tightened before using.

Parts List

Description Quantity

A. CASTERS

5
B. 5 STAR BASE

1
C. GAS LIFT

1
D. BELLOW

1
E. SCREWS (Ф1/4″ X 1″)

12
G. SEAT CUSHION

1
H. ARMRESTS (L&R)

2
I. BACK CUSHION

1
J. BACK SUPPORT PLATE

1
K. ALLEN KEY
L. CAPS

1
8