Looxcie HD, LXHD User Manual

Power Switch (3 Positions)

Wi-Fi ON = blinking blue
Power ON = blinking green
Power OFF= no light

Tip: To save power while recording,
turn Wi-Fi off when not using
Looxcie mobile app.

Battery Latch

Slide to release battery

Battery

USB Port

Charge or connect to computer

Microphone

Record Light

Red = Recording

Camera Lens

Record Button

Start & stop recording

Instant Clip Button

Instantly create 30-sec clips

Wi-Fi ON
Power ON
Power OFF

USER MANUAL
Version 2.0

FEATURES

> Full HD recording up to

1080p @30fps or 720p @60fps

> 480p mobile streaming for sharing a live

feed anytime, anywhere

> Simultaneous streaming & recording
> Sleek, hands-free design with a wide

range of mounting options

> Live video streaming over mobile

networks to Facebook and web

> Mobile app for viewfinder and controls
> Built-in Wi-Fi connectivity
> Weather-resistant enclosure for use in

virtually any climate

> Low-light sensor for use in dim lighting
> Unique Instant Clip button for creating

“instant replays” of what just happened

> Protective lens filter
> Rechargeable and replaceable battery
> Supports microSDHC card up to 64GB

(Class 4 type; Card not included)

ACCESSORIES

Looxcie HD features a variety of mounting
accessories for hats, helmets, tripods, bikes,
cars & more.

Click here to shop Looxcie HD accessories.

2 3

CHARGE

Fully charge battery before first use.

1. Remove rubber rear panel cover. Confirm power switch is

in OFF position (closest to micro-USB port).

2. Plug USB Cable into camera’s micro-USB port.

3. Plug USB Cable into USB port on computer or AC adapter.

(Power switch blinks green.)

4. Power switch turns solid green when fully charged.

5. Replace rubber rear panel cover to ensure weather-resistance.

DOWNLOAD

LOOXCIEDESKTOP UTILITY (compatibility page 6)

Click here to install LooxcieDesktop for firmware updates
& to transfer video to your computer.

1. Download, install & launch LooxcieDesktop on PC or Mac.

2. Slide camera power switch to ON position & connect to

computer via USB cable.

3. Install firmware updates if available.

4. Select “Manage” to copy or delete video clips & raw video buffer.

Note: To download raw video buffer, first copy & delete video clips.

LOOXCIE MOBILE APP (compatibility page 6)

Click here to download Looxcie mobile app for Android or iOS.

1. Download & launch Looxcie app on smartphone or tablet.

2. Setup Looxcie account & follow login steps.

3. Record & stream live video or watch friend & community videos.

Note: To live stream, connect to mobile network (3G or 4G).

BATTERY

1. Align metal prongs on battery & camera.

2. Insert front battery hooks into camera.

3. Close back of battery to lock in place.

4. To release battery, slide battery latch on

rear panel.

Note: Extra batteries available for purchase.

SETUP

MEMORY CARD (not included)

1. Slide silver slot toward USB port to unlock

and then lift to open (as shown below).

2. Insert card with metal prongs facing down

directly on top of metal prongs in slot.

3. Close slot & slide forward to lock in place.

Make sure card is seated properly.
(Card should lie flat.)

Note: Camera requires Class 4 (or higher)
microSDHC card & supports up to 64GB.

CONNECT

Android

1. Slide camera power switch to Wi-Fi ON

(farthest from micro-USB port).

2. Turn on your smartphone’s or tablet’s Wi-Fi (under Settings).

3. Launch Looxcie mobile app & login or record offline.

4. Tap red camera button to choose from camera modes.

5. Select “Looxcie” from Wi-Fi connection options.

6. Follow connections help steps on next screen.

If you are unable to connect after following the steps above,
see troubleshooting section on pages 7 & 8.

iOS

1. Slide camera power switch to Wi-Fi ON

(farthest from micro-USB port).

2. Turn on your smartphone’s or tablet’s Wi-Fi (under Settings).

3. Select your “Looxcie_######” from list of Wi-Fi networks.

4. Launch Looxcie mobile app & login or record offline.

5. Tap red camera button to choose from camera modes.

6. Select “Looxcie” from Wi-Fi connection options.

7. Follow connections help steps on next screen.

If you are unable to connect after following the steps above,
see troubleshooting section on pages 7 & 8.

GETTING STARTED

GETTING STARTED