Loop X Systems 2B User Manual

LOOP X SYSTEMS 2B

pedal based loop switcher with A/B output.

Welcome to the Loop X Systems 2B pedal. Our pedal features footswitch control
over two individual effect loops, and signal routing. The additional ‘B’ output
provides the option to send your signal to another amp, more effects, or
anywhere you can imagine.

Using individual loops within a standard pedal board increases the flexibility of
the pedal system and gives access to sounds not so easily achieved on regular
pedals in a series setup. The two loops will make sections out of your pedal
board letting you shut on and off specific parts to your pedal board.

Loop 2Xflr lets you switch on 2 or 3 pedals in advance, and then using Loop 2Xflr
to access those 2 or 3 pedals with the flick of one switch. 2Xflr may also be used
to send signal to other amplifiers, or as a splitter device for effect routing and
isolation.

Introduction to the input and output jacks of Loop 2Xflr.

1. Instrument input - plug in instrument directly, or from part of your pedal board.

2. Loop 1 input - Accepts output from pedals, or other inst. Level signal.

3. B output Pre/Post switch - Using the dual mode system, the 3rd footswitch will

be affected. Dual mode lets the footswitch turn both loops
on or off simultaneously. Toggle mode makes the pedal flip/flop
between loop 1 and loop 2.

4. Loop 2 input - Accepts output from pedals, or other inst. Level signal.

5. Instrument output – Send over to amplifier, or other part of pedal board.

6. 9 Volt input / output - Plug 9V power into one of these 9V jacks. 9V power
automatically comes out of the second 9 Volt jack. This is a 9 Volt jumper system.
DO NOT connect 9 Volt power into both jacks at the same time.

7. Loop 1 output - Send signal into pedals, or send signal to other device.

8. B output - Send signal to another amplifier, tuner, or sound system.

9. Loop 2 output - Send signal into pedals, or send signal to other device.

10. Auxiliary 9 Volt input / output - The 9 Volt jacks are either an input or an

output. Only one 9 Volt power in is required to power the 2Xflr.

Usage for the Loop 2Xflr.

The following setups have many uses for the 2B system. First off using the pedal as a

central part of your pedal board lets you turn on and off sections of your pedal board.

Especially if you have certain pedals you don’t use all the time. The 2B pedal puts

direct bypass on any pedals in the loops. This means, no more running your signal

through that wah, distortion, tremolo, phaser, when you do not use them. The 2B keeps

only your bare essentials in your signal chain when you perform. And at the touch of one

button add in any effects you like, or however you route your signal path.

In the following page we have a sample of how to setup and use the Loop 2B pedal.

ONE YEAR CONSUMER LIMITED WARRANTY

DEELEEBOB Music products are warranted to be free from defects in materials or workmanship
for one year from the date of purchase. Within this period, DEELEEBOB will, at its sole option,
repair or replace any components that fail in normal use. Such repairs or replacement will be
made at no charge to the customer for parts or labor, provided that the customer shall be
responsible for any transportation cost. This warranty does not
such as scratches, nicks and dents; (ii) consumable parts, such as batteries, unless product damage
has occurred due to a defect in materials or workmanship; (iii) damage caused by accident, abuse,
misuse, water, flood, fire, or other acts of nature or external causes; (iv) damage caused by

apply to: (i) cosmetic damage,

service performed by anyone who is not an authorized service provider of DEELEEBOB; or (v)
damage to a product that has been modified or altered without the written permission of
DEELEEBOB. In addition, DEELEEBOB reserves the right to refuse warranty claims against
products or services that are obtained and/or used in contravention of the laws of any country.

Repairs have a 90 day warranty. If the unit sent in is still under its original warranty, then the new
warranty is 90 days or to the end of the original one year warranty, depending upon which is
longer.

THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE
AND IN LIEU OF ALL OTHER WARRANTIES EXPRESS, IMPLIED, OR
STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, STATUTORY OR OTHERWISE.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM
STATE TO STATE, COUNTRY TO COUNTRY.

IN NO EVENT SHALL DEELEEBOB BE LIABLE FOR ANY INCIDENTAL, SPECIAL,
INDIRECT, OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE,
MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE
PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO
YOU.

DEELEEBOB retains the exclusive right to repair or replace (with a new or newly-overhauled
replacement product) the device or software or offer a full refund of the purchase price at its sole
discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR
ANY BREACH OF WARRANTY.

To obtain warranty service, contact DEELEEBOB Music Product’s via email for shipping
instructions and an RMA tracking number. Securely pack the device and a copy of the original
sales receipt, which is required as the proof of purchase for warranty repairs. Write the tracking
number clearly on the outside of the package. Send the device, freight charges prepaid, to
DEELEEBOB Music Products.

Full PDF manuals, updates and new product releases available on our website.
www.LoopXsystems.com

Email at : [e-mail]

DEELEEBOB Music Products
37-4 Yongsan 2 Ga, Yongsan Gu,
Seoul, Korea,140-840
Fax : [phone]

www.LoopXsystems.com

© 2013 DLB Music Products