Page 1
Assembly Instructions for Child’s Table
ank you for purchasing. Should you have any questions or need to contact sales or support, please do
not hesitate to contact our corporate oces.
Tools Needed: Phillips or Square Drive Screw Driver
Before beginning assembly, please take a few moments to carefully read the instructions, familiarize yourself
with the components and understand each step of the process. Likewise, please ensure that the hardware package
contains the items as described below.
Parts List: (1) Table Top, (2) Leg Assemblies
Hardware List: (12) Screws
Assembly Instructions:
Step 1. Remove components from shipping boxes. You may lay the cardboard on the oor to prevent marring of
nish.
Step 2. Lay table top face down on a so, non-marring surface.
Step 3. Place one leg assembly on table top and align with position marks.
Step 4. Tighten pre-started screws until secure.
Step 5. Repeat steps 3 & 4 for other leg assembly.
PLEASE NOTE: If you purchased your item “ready to nish” special care must be taken to properly apply a high
grade nal nish in a timely manner. Doing so will help protect your purchase from discoloration and damage
caused by exposure to ultra-violet light and/or weather. if the products intended use is outside, please use an
exterior rated nish to also protect from weather damage. See use and care instructions for further information.
Failure to adequately protect item by application and as needed, re-application of a nal nish may void warranty.
Loading...