Assembly Instructions
Nightstand with Concealed Compartment
1/7
Part List
A
Top Table
1 pc.
D
Shelf
1 pc.
G
Back Panel
1 pc.
H
Front Crossbar
1 pc.
B
Left Panel
1 pc.
E
Top Shelf
1 pc.
Back Crossbar
I
2 pcs.
C
Right Panel
1 pc.
F
Bottom Frame
1 pc.
J
Bottom End
1 pc.
K
Drawer Front
2 pcs.
Hardware
x 8
RF10052
Large Screw
L
Drawer Left
2 pcs.
RF40140
Metal Handle
Drawer Right
RF10019
Small Screw
x 2
M
2 pcs.
x 16
N
Drawer Back
2 pcs.
Magnet
O
Drawer Plate
2 pcs.
x 1
RF40015
Allen Key
x 1
2/7
x 4
RF10052
E
Back
D
F
Diagram 1.
C
Front
Step 1:
Place the Right Panel (C) onto a soft surface. Attach Shelf (D), Top Shelf (E)
and Bottom Frame (F) into Right Panel (C) by using Large screws (RF10052)
as per diag 1.
Back
I
I
H
E
D
J
Diagram 2.
Front
Step 2:
Put the Back Crossbars (I), Front Crossbar (H) and Bottom End (J)
into the unit as per diag 2.
3/7
Back
G
Diagram 3.
Front
Step 3:
Insert the Back Panel (G) into grooves as per diag 3.
x 4
RF10052
B
Back
Step 4:
Attach Left Panel (B) into the unit
by using screws (RF10052) as per diag. 4.
Diagram 4.
Front
4/7
Drawer
x 8
RF10019
L
N
x 1
RF40140
K
O
M
Diagram 5.
Step 5: Assemble the Drawers.
Attach the Front (K), Left (L), Right (M), Back (N) and plate (O) together by using screws
(RF10019). Then, attach
Handle
(RF40140) into the Front (K) of drawer as per Diag.5.
Diagram 6.
Step 6:
Place the drawers into the position
as per Diag.6.
5/7
Rail
A
Sliding Rail
Diagram 7.
Step 7:
Install the Top Table (A) into the unit. Alignment
the sliding rail into the same straight line of the rail,
sliding as per Diag. 7.
The Unit Completed
6/7
WARNING.
compartment are the sole responsibility of the user and are to be stored at the user's discretion.
Regardless of loss, seizure, damage, or changes in condition to the inner contents of the hidden
compartment, the manufacturer is not liable for the contents stored in the hidden compartment.
The hidden compartment is NOT a security safe. The inner contents in the hidden
How to use the concealed compartment
The hidden compartment is built in,
shipped with the locking bolt (if installed),
Diagram 8.
Solid Wood
Sticker
and is disengaged and unlocked.
In order to engage the hidden compartment lock,
please remove the sticker which blocks the bolt
(see the diagram 8).
This sticker identies the designated position.
Place the magnetic key here to unlock
the concealed drawer.
* Before removing the sticker, please note the designated position.
Diagram 9. Diagram 10.
Unlock and Open: place the magnetic key
onto the assigned position shown above
to unlock and pull out the drawer as per
diagram 9.
Close and Lock: close the drawer
and remove the magnetic key from the
assigned position to lock the drawer
as per diagram 10.
7/7
Loading...