Page 1
THANK YOU
We take great pride in making the highest quality lighting and
mailboxes.
Mailbox Maintenance Instructions
*WARNING* Cleaning products that contain Ammonia should not be used.
Also do not use anything abrasive to wipe or clean the metal surface.
*WARNING* When cleaning the front panel be careful not to get caught in metal
artwork or patterns. You may bend or break the delicate art work.
Regular cleaning of your products will help keep the
finish from tarnishing and keep them looking good for years to come. Inspect your
mailbox once a month and depending on the dirt level either remove with air or lightly dust with a soft cloth. If needed use water with a mild detergent (Dish Soap) and
lightly scrub with a soft cloth. Be careful when cleaning around the front panel on
your mailbox. The delicate patterns and artwork can get caught in your cleaning cloth
which can bend or break. Rinse and gently dry mailbox. For coastal locations you
may want to check your mailbox twice a month to help prevent the harsh salt air from
damaging your finish.
Page 2
Installation Instructions
MAILBOX MOUNTING INSTRUCTIONS - LARGE
1. Using a ¼” drill bit, mark and drill two
level holes 10” apart from each other.
2. Hammer the blue plug anchors into the
two ¼” holes. Screw the two #10 x 1 ½”
stainless steel screws into the two blue
anchors, leaving ½” of threads exposed
outside of the wall.
3. Slide the mailbox over the two stainless
steel screws using the two key slot holes in
the back of the mailbox. Once the heads
of the screws have passed the back wall
of the mailbox allow the box to drop down
and rest level on to the screws. Gently
tighten the screws until the mailbox is snug
to the wall. Do not over tighten.
GLASS INSTALLATION INSTRUCTIONS OPTIONAL MAGAZINE
RACK INSTALLATION
Loading...