Use
6
0 Wattage (Maximum) type
A
bulb
ASSEMBLY INSTRUCTIONS
1. CAREFULLY UNPACK AND PLACE ALL PARTS ON A
SMOOTH SURFACE AND LAY THEM UP AS PER THE
SKETCH.
2. CONNECT THE SOCKET GROUP (C),IRON TUBE (B),
BASE GROUP (A) AS THE SKETCH.
3. STICK THE PAD (G) INTO THE BOTTOM OF THE BASE (A).
4. INSERT HARP (D) INTO THE LAMPHOLDER CAP OF
THE SOCKET GROUP (C) .
5. PUT SHADE (E) ONTO THE HARP (D), SCREW FINIAL(F) TO
TIGHTEN THE SAHDE .YOUR NEW LAMP IS NOW READY
TO ENJOY.
(Bulb not included)
IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE
IS WIDER THAN THE OTHER) AS A FEATURE TO REDUCE THE
RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A POLARIZED
OUTLET ONLY ONE WAY. IF IT DOES NOT FIT FULLY IN THE
OUTLET,REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT
A QUALIFIED ELECTRICIAN. NEVER USE WITH AN EXTENSION
CORD UNLESS THE PLUG CAN BE FULLY INSERTED. DO NOT
ALTER THE PLUG.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Loading...