ASSEMBLY INSTRUCTIONS
2. CONNECT THE GREEN GROUND WIRE "〒" TO THE
AS ILLUSTRATED
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
*** THIS IS A DIRECT WIRED FIXTURE. WE STRONGLY RECOMMEND INSTALLATION
BY A LICENSED ELECTRICIAN.
*** TO REDUCE THE RISK OF ELECTRIC SHOCK, SHUT OFF THE MAIN ELECTRICAL SUPPLY AT
FUSE BOX/CIRCUIT BREAKER.
*** THIS FIXTURE SHOULD ONLY BE CLEANED WITH A SOFT LINT FREE CLOTH DAMPLED
WITH WATER. DO NOT USE ANY CHEMICAL OR ABUSIVE CLEANER AS THEY MAY DAMAGE
THE SURFACE OF THE PRODUCTS.
CAREFULLY UNPACK AND PLACE ALL PARTS ON A
SMOOTH SURFACE.
1. PUT THE WIRE THROUGH THE CANOPY (C) AND
MOUNTING PLATE (A)
SUPPLY WIRE, CATHODE WIRE "N" IN WHITE TO
THE SUPPLY WIRE, ANODE WIRE "L" IN BLACK TO
THE SUPPLY WIRE IN THE JUNCTION BOX
WITH WIRE NUTS
3. AFFIX THE MOUNTING
PLATE(A) TO THE JUNCTION BOX
BY SCREWS(B).
4 LEAVE DESIRED WIRE LENGTH
OUTSIDE THE CANOPY, TUCK
ADDITIONAL WIRE INSIDE THE
CANOPY AND FIX IT WITH PLASTIC
CLIP, AFFIX THE CANOPY(C) TO
THE MOUNTING PLATE BY
SIDE SCREW (D).
5. SCREW POLE(F) ONTO
SOCKET SECTION(M),
SCREW NUT(E) INTO POLE(F)
TO FIX THE WIRE.
6.UNSCREW RING(I), PUT METAL SHADE (G) AND GLASS SHADE (H)
ONTO THE SOCKET(K),TIGHTEN WITH RING(I) AGAIN.
7.INSTALL THE BULB (J).
N
L
A
B
C
D
E
F
K
G
TURN ON POWER AND ENJOY YOUR LIGHT!!!
H
I
Use 6
BULB (Edison Bulb included)
0 Watt x 4 Max type A
J
Loading...