Assembly Instructions
2’ Lighthouse with Base
Thank you for choosing Furniture Co.
We hope that this piece brings you many years of enjoyment!
For help with assembling your furniture,
or if you have missing hardware, please email us at
help@aandlfurniture.com or call us at 866-896-5747
PARTS (included)
1½” Screws (6)
Ground Stakes (2)
Square Drive Bit (1)
TOOLS NEEDED
Screw gun
Hammer
Cap
b
a
c
Base
photo 2 photo 3
b
b
Body
HARDWARE (included)
photo 5
b
STEP 1
Set the lighthouse body upside down. Place the base upside down on the bottom of the body aligning the
sides as shown. (See photo 1.) Place the six 1½” screws in the predrilled holes in the inside of the base &
screw into the body with the screw gun. (See photos 2 & 3.)
photo 4
STEP 2
Place the cap on top of the head. (See photo 4.) Take the lighthouse to the desired location & pound in the
2 ground stakes in the predrilled holes in the base ring. (See photo 5.)
photo 1
Loading...