Page 1
Use and Safety
During Use:
• Perfect for patio setting and holds 50lbs of sand. Other weight bearing materials may be used.
Not recommended are any wet materials or water.
• Base tube will accept any umbrella with up to a 2” pole.
Safety After Use:
• Do not stand on side table stand.
• Remove umbrella when moving the table.
• Place in a cool dry place, or use a protective cover (sold separately) to prevent
damage caused by exposure to the elements outdoors.
• Rmove weight from the table when moving.
Side Table Stand
Safety and Instructions
Page 2
Assembly
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY
Thank you for purchasing our product! We hope you enjoy many years of safe
and useful ownership. Please see below for instructions on assemebly of
your new Umbrella Stand.
Assembly
A 1 pcsA 1 pcs B 2 pcs
F 1 pcs1 pcs G 10 pcs
One:
On a at stable surface, place part A upside down.
Place part B upside.
C 28 pcs
1 pcs
H
D 2 pcs
I 1 pcs
E 1 pcs
C
Two:
Use 8 of part C to secure part B to part A.
Five:
Carefully place part E to part A
Seven:
Attach part F to the completed part B using 10
of part C.
Six:
Fasten part E to part A with 2 of part C.
Eight:
Take part H and screw into part E.
Three:
Place part D aligned within the space between
part B's, and attach using 4 of part C.
Four:
Repeat Step 3 with remaining part D.
Nine:
Lastly, ip the entire unit over and nish by
placing in part I. Once completed it is ready to use.
Loading...