Quickstart Guide
Version B
www.logtag-recorders.com
Quickstart Guide Contents
What's Included 3
Downloading Analyzer 4
Confi guring your UHADO-16 5
Starting your UHADO-16 6
During Recording 7
Downloading Data 8
What’s Included
Please check you have each of the items
shown below before continuing with setting
up your UHADO-16.
UHADO-16
Optional:
LTI Interface
(Not included)
Note: The UHADO-16 can be used with
a Micro-USB cable or any of the LogTag
Interface Cradles
USB Cable
(Not included)
Page 3
Downloading LogTag Analyzer
To use the UHADO-16, you will need the latest
version of LogTag Analyzer. To download, open your
browser and navigate to:
https://logtagrecorders.com/software/LTA3/
1. Fill in the form with your details, then click ‘Go to
downloads page’
2. Click ‘Download Now’ to start the download
3. Click ‘Run’ or ‘Save File’ then double-click the
downloaded file to open the LogTag Analyzer Setup
Wizard
4. Follow the on-screen prompts to install LogTag
Analyzer
5. Click ‘Finish’ to exit the LogTag Analyzer Setup
Wizard
Warning: Please ensure no other LogTag software
is currently running on your computer before running
the Analyzer software.
Page 4
Confi guring your UHADO-16
Connect your UHADO-16 to the
computer via the USB cable. The USB
socket on the device is located on the
bottom, protected by a rubber seal.
Alternatively, you can dock your UHADO-16 into any LogTag
Alternatively, you can dock your UHADO-16 into any LogTag
interface cradle.
interface cradle.
1. Open LogTag Analyzer
2. Click ‘Configure’ from the ‘LogTag’ menu or click the ‘Wizard’
icon
3. Adjust your logger configuration settings as required.
For more information on configuration settings, please refer to
Configuring UHADO-16 in the Product User Guide or press ‘F1’ for
help from your keyboard
4. Click ‘Configure’ to upload the configuration settings to the
logger
5. Click ‘Close’ to exit the configuration page
Page 5
Starting your UHADO-16
Display overview:
Press and hold the
START/Clear/Stop button.
STARTING will appear along
with READY.
Release the button once
READY disappears.
The UHADO-16 now records
temperature and humidity
data.
The Logger will not start if
you release the button before
READY disappears.
Alarm/OK Indicator
Battery Low Symbol
Recording State
Indicators
Temperature
Temperature units
Clock
Humidity
Alarm
Markers
Page 6
During Recording
To view more information about clearing
alarms and resetting and reviewing trip
statistics, please refer to the Product User
Guide.
End of page
Page 7
Downloading Results
Connect your UHADO-16 to the
computer via the USB cable. The USB
socket on the device is located on the
bottom, protected by a rubber seal.
A new device drive will appear in file
explorer with the files containing the
recorded data.
Alternatively, you can dock your UHADO-16 into any LogTag
Alternatively, you can dock your UHADO-16 into any LogTag
interface cradle.
interface cradle.
1. Open LogTag Analyzer
2. Click ‘Download’ from the ‘LogTag’ menu or press F4
3. Click ‘Close’ to exit the download page
By default, auto-download is enabled in LogTag
Analyzer so when you open the program, data
results will be displayed after connecting your
UHADO-16 to the computer.
Page 8
Loading...