LogiLink WL0130 User guide

According to the European WEEE directive, electrical and electronic equipment must not be disposed with consumers waste. Its components must be recycled or disposed apart from each other. Otherwise contaminative and hazardous substances can pollute
You as a consumer are committed by law to dispose electrical and electronic devices to the producer, the dealer, or public collecting points at the end of the devices lifetime for free. Particulars are regulated in national right. The symbol on the product, in the user's manual, or at the packaging alludes to these terms. With this kind of waste separation, application, and waste disposal of used devices you achieve an important share to environmental protection.
our environment.
1.0 Safety Instructions
Put the Device always on a stable and straight Surface. In case of falling it can be damaged. Don’t place the Device into direct Sunlight or in Places with high Temperature. This can damage the Device or shorten his average useful Life. Don’t place it in the near of Heat Sources, like Radiators or other heat producing Devices. Don’t expose the Device to Rain, Water, Wetness or high Humidity. Don’t place it in the Bathroom or the Kitchen in the near of a Sink. Avoid the direct Contact with Water. Don’t try to open the Device. Prior to the first use of our product make a backup of your data. We are not liable for any loss of data, unless you can accuse us intention or gross negligence. In any case, liability for loss of data is limited to the effort that is necessary to restore from existing backup copies.
Congratulations to the Purchase of LogiLink WL0130!
Please read the Manual and Safety Instructions before using the product for the first time. Otherwise damage can be the result.
2.0 Introduction
2.1 Specification
Comply with IEEE 802.11n/g/b
standards
Supports high data rate up to 300Mbps Comply with IEEE 802.3af Powered
Device (PD) standard
High transmit power with good receive sensitivity Supports point-to-point and point-to-multi point bridge function Supports WDS (Wireless Distributed System) repeater mode Supports Universal Repeater and AP Client mode Supports 64/128-bit WEP, WPA, WPA2 and IEEE 802.1x
wireless securities
Supports WPS hardware button Provides MAC access control Provides hidden SSID function Supports Web-based configuration Firmware upgradeable Supports Green WLAN for smart Tx power saving, Implicit Rx
power saving and CPU offload
2.2 Package Contents
1 x Wireless N 300Mbps POE Access Point 1 x AC Power Adapter 1 x Quick Installation Guide 1 x CD (Driver + Manual)
3.0 Installation
3.1 Installing the access point to your Network
Please follow the following instruction to build the network connection between your new wireless access point and your computers, network devices:
Loading...
+ 6 hidden pages