Do not throw the appliance away with the normal
household waste at the end of its life, but hand it in
at an official collection point for recycling. By doing
this you will help to preserve the environment.
1.0 Safety Instructions
Put the Device always on a stable and straight Surface. In case of
falling it can be damaged.
Don’t place the Device into direct Sunlight or in Places with high
Temperature. This can damage the Device or shorten his
average useful Life.
Don’t place it in the near of Heat Sources, like Radiators or other
heat producing Devices.
Don’t expose the Device to Rain, Water, Wetness or high Humidity.
Don’t place it in the Bathroom or the Kitchen in the near of a Sink.
Avoid the direct Contact with Water.
Don’t try to open the Device.
Prior to the first use of our product make a backup of your data.
We are not liable for any loss of data, unless you can accuse us
intention or gross negligence.
In any case, liability for loss of data is limited to the effort that is
necessary to restore from existing backup copies.
Congratulations to the Purchase of Logilink Internet Camera!
Please read the Manual and Safety Instructions before using the
product for the first time. Otherwise damage can be the result.
- 1 -
2.0 Introduction
2.1 Specification
Camera/Image:
- Dual Mode: MPEG4 and Motion-JPEG Image Video
- Multiple Profiles: Output M-JPEG and MPEG4 at the same time
- Multi-area Motion Detection
- Provides Fixed Focus Lens, F = 2.8
- Supports Up to 30 fps Video Frame Rate
- High Speed Hardware-Based Image Compression
HTTP/Utility:
- Includes easy-to-use Viewer & Recorder utility
- Provide Admin utility, Camera Viewer & WEB browser Management
- Supports Wireless 802.11b/g/n Standard (for WC0041 only)
- View multiple cameras simultaneously - Up to 16 at a time
- Supports 4 additional user accounts for viewing camera
- Manual/Schedule/Cycle Record, Video playback/ Forward/
Pause/ Stop
- Auto sending Video by E-mail and FTP
- Firmware Upgradeable
- Supports Windows 2000/XP/Vista/7
2.2 package contents
1 x Internet Camera (WC0040)/ Wireless 11N Internet Camera
(WC0041)
1 x Power Adapter
1 x Camera Stand accessory kit
1 x 100cm Category 5 Ethernet Cable
1 x User Manual
1 x CD (Including Manual/Utility/Driver)
- 2 -
2.3 System Requirement
OS System: Windows 2000, XP + SP2, Server 2003,
Vista32/64, Win7
CPU: Intel Pentium III 750MHz above or Intel Celeron 1GHz
above
Memory Size: 128MB (256MB recommended)
VGA Card Resolution: 800 x 600 or above
3.0 Hardware Installation
3.1 LED and Focusing
The Camera head and its focus ring allow you to modify the aim
and focus of the Camera.
To adjust the Camera’s focus, rotate the dark focus ring.
There are two LEDs indicating the camera status and networking
status.
Green
Steady: System is ready
Blinking: System is booting.
Blue
Steady: LAN is connected.
Blink: WLAN is activated.
Focusing LENs
LED Green: Status
LED Blue: WLAN Status
(Wireless WC0041 Only)
Antenna
- 3 -
3.2 Camera Ports
The Camera features two ports and a button.
WPS Button: click for WPS function (wireless model) or reset
function or hold for more than 5 seconds to reset the camera
settings to factory default value.
Power Jack: Connect to power adapter for power supply with 5V
DC.
LAN Jack: Connect to your local area network by network cable.
Stand ho le
Power Jack
5V DC
WPS
Reset to Default
LAN port
- 4 -
3.3 Installation Procedure
1. Connect the Internet Camera to your network by attached the
network cable from the switch/router to the LAN port of the
Internet Camera.
2. Connect the power adapter to the Internet Camera and plug
the power adapter to power outlet. The Internet Camera will
be powered on. When the Internet Camera is ready, the
Green LED will light.
Note: It is highly recommended to use the power adapter
shipped with the Internet Camera, do NOT use any other
power adapter from any sources.
- 5 -
4.0 Software Installation
Follow the simple steps below to run the Install Wizard to guide
you quickly through the Installation process. The following
installation is implemented in Windows XP. The installation
procedures in Windows 2000/XP/Server 2003/Vista/Win7 are
similar.
1. Insert the provided CD into your CD-ROM drive. The
“Autorun.exe” program should be executed automatically. If
not, run “Autorun.exe” manually from “Autorun” folder in the
CD.
2. The Install Wizard will show three selections, select the
program you want to install or click “Exit” to install the
program later. The following installation steps are the
demonstration of “Install Administrator Utility” and ‘’Install
16 Chan Camera Viewer’’.
- 6 -
3. Click ‘’Install Administrator Utility’’ and when the following
window appears, click ‘Next’.
4. You can specify the destination folder of software installation.
You can just use the default folder, and click ‘Next’ to
continue.
- 7 -
5. If you need installation program to create a desktop icon or a
quick launch icon for you, click all items you need here, and
click ‘Next’ to continue.
6. Here lists all options you chose in previous steps, if
everything’s correct, click ‘Install’ to start installing procedure,
or click ‘Back’ to go back to previous step to modify installing
settings.
- 8 -
7. The installing procedure will take some time, please be
patient.
8. When you see this window, it means the software installing
procedure is complete. Please click ‘Finish’ to finish the
procedure (IP camera surveillance software will start after you
click ‘Finish’ button, if you want to start it later, uncheck
‘Launch IP Cam Surveillance Software’ box).
- 9 -
9. After finished the installation of Administrator Utility, please go
back to wizard page and click ‘’Install 16 Chan camera
viewer’’, the system will start running viewer installation and the
procedures are similar to the installation of administration utility.
10. When the installation is completed. Please
run ”Administrator Utility“. On the Internet
Camera first page, the cameras found in the
network are listed. Choose the one you want to
configure and click “Setting Wizard” to proceed.
- 10 -
11. Please enter the default password “1234” and click “OK” to
login to the IP setup page.
12. Internet Camera is working through the network (TCP/IP
Protocol). The IP address setting must be correct, or you
cannot access to the camera. The wizard program will detect
the IP address status of your network automatically and
suggest a free IP address for the Camera. You can accept the
suggested value or enter the value manually. If you enter the
value manually, please be aware that the “Subnet Mask” must
be the same for both the camera and the PC. Click “OK” to
apply the configuration.
- 11 -
Or select ‘’DHCP’’ to obtain an auto IP setting from DHCP
server and click ‘’OK’’ to apply the configuration.
13. Click ‘IP Cam Surveillance Software’ icon from
desktop, quick launch bar, or start menu to start
the IP camera surveillance software.
- 12 -
14. Please cl ick ‘System configure’ button and a popup
menu will appear
Please select ‘Configure Cameras’ to configure cameras
15. In this table you can configure all cameras you wish to
connect. Up to 16 cameras can be connected simultaneously,
choose the camera you want to connect on the ‘’Camera
Search’’ list and click ‘’Select’’ to add it into the channel you
want to view then click ‘’ok’’
- 13 -
16. The IP Cam Viewer will pop out and the video will show on the
channel you choose automatically. Congratulations!! You have
settled the camera successfully.
The CE mark confirmed that this product meets the
main requirements of the Directive 2004/108/EC and
2006/95/EC of the European Parliament and the
Council of Europe concerning telecommunications
and terminals regarding the Safety and health of
users and of electro-magnetic interference
compliance. The CE has been demonstrated. These
statements are deposited by the manufacturer.
- 14 -
Loading...