Do not throw the appliance away with the normal
household waste at the end of its life, but hand it in
at an official collection point for recycling. By doing
this you will help to preserve the environment.
1.0 Safety Instructions
Put the Device always on a stable and straight Surface. In case of
falling it can be damaged.
Don’t place the Device into direct Sunlight or in Places with high
Temperature. This can damage the Device or shorten his average
useful Life.
Don’t place it in the near of Heat Sources, like Radiators or other heat
producing Devices.
Don’t expose the Device to Rain, Water, Wetness or high Humidity.
Don’t place it in the Bathroom or the Kitchen in the near of a Sink.
Avoid the direct Contact with Water.
Don’t try to open the Device.
Prior to the first use of our product make a backup of your data.
We are not liable for any loss of data, unless you can accuse us
intention or gross negligence.
In any case, liability for loss of data is limited to the effort that is
necessary to restore from existing backup copies.
Congratulations to the Purchase of VG0009!
Please read the Manual and Safety Instructions before using the
product for the first time. Otherwise damage can be the result.
2.0 Introduction
Logilink VG0009 DVBT Express card for you to watch, record,
pause, replay live Digital TV, Teletext and FM radio on PC.
2.1 Features
• Compliant Digital DVB-T standard.
• Compliant with Express Card/34 mm module standard
• Watch, record, pause, replay digital live TV, Teletext and FM
radio
• Intelligent EPG guides you through what and when to watch
-1-
• TimeShift to pause live TV shows for a break or skip
commercial
• Smart search to quickly locate favorite TV shows
• Search filter helps to display program by time, by type: TV or
Radio, Free to Air or Scrambled
• Real-time record while watching live TV show
• Schedule record
• Remind to watch at scheduled time
• Auto & manually scan all available channels
• Display subtitle, support multiple language & audio channels
• Capture TV show/DVD video as still image
• Freely manage favorites channels
• Multi-channel preview to quickly access favorite programs
• Smart Stretch lets video smart fit on all monitor, avoid video
loss or distortion
• Advanced power saving scheme for Notebook PC
• Auto wakeup to perform schedule task at PC hibernation
status
2.3 System Requirements
• CPU: Intel Celeron 600MHz or above
• 128MB RAM or above
• Windows 2000/XP/Vista/Win 7
• Direct 9.0 or later
• At east 512 MB temporary space for Timeshifting
• Display card have 24bit resolution and support DirectX, 8MB
Video-ROM
• Sound Card compatible with windows and stereo
2.4 Package Content
• 1 x DVB-T Express Card
• 1 x Antenna
• 1 x Remote Control
• 1 x User Manual
• 1 x CD (Driver and Software)
-2-
3.0 Installation
3.1 Driver installation
1. Insert the VG0009 Express Card into a free Express Card
slot of your notebook.
2. Insert device driver CDROM into the CD/DVD ROM drive of
your computer.
3. Then the wizard will display on the screen as below and
please click “Driver Installation” to install the driver.
4. Please select the setup language and click “Next” to
continue.
-3-
5. Please click “Install” and then “Finish” to finish the driver
installation.
3.2 BlazeDTV application software installation
1. After driver is installed, please click “BlazeDTV“ on main
menu of the wizard to install the application software for
HDTV Player.
2. Please select Setup Language and then follow the steps to
finish the installation
-4-
-5-
-6-
3. For the Initial implementation of the program installed,
please retrieve the package to get the CD serial number to
complete the registration.
4. Please click "Yes" to channel scan and then “OK”.
5. Press "OK" to complete channel scan.
-7-
4.0 Blazevideo HDTV Player Introduction
Button/Icon Name Description
EPG Open HDTV EPG window
Play Play HDTV or Media
TimeShift/
Pause
Stop Stop playback
Record Record HDTV or DVD
Previous Skip to play previous HDTV
Browse Browse channel
Next
TimeShift (for HDTV) or pause
playback
channel / DVD chapter
Skip to play next HDTV channel /
DVD chapter
-8-
Open Select playback type
Subtitles Select Subtitles
Audio Select Audio
Capture Capture video as .bmp still image
Volume
Control
Drag slider bar to adjust volume
Mute Turn on/off audio
Media
Type
Playback
Display playback type
Display playback status
status
Signal
Quality
Signal
Display HDTV signal quality
Display HDTV signal strength
Strength
Channel/
chapter
Time Display current time of HDTV /
Fast
backward
Slider bar
Fast
Forward
Open
Display current HDTV channel /
DVD chapter
DVD
Fast backward, switch between
1X, 2X, 4X, 8X, 16X at each press
Drag the slider to new position for
playback.
Fast forward, switch between 1X,
2X, 4X, 8X, 16X at each press
Show Floating Panel
Floating
Panel
Show
Advanced
Show/Hide Advanced Panel
Panel
-9-
5.0 Operation Guide
BlazeVideo HDTV Player features very easy usage and below
we just guide you through the HDTV operation for DVD and
medial files playback. For detail, please refer to the Help file
attached with the software.
5.1 Scan Channels
1. Auto Scan Channels
If a HDTV device installed or connected to your PC, and its
driver has been properly installed, after launch BlazeVideo
HDTV Player, a box will pop up to enquire you whether to
scan channels.
Click “Yes”, the "Scan" box ejects for you to set scan options.
Advanced Setting: Check in "Advanced Scan" and click
"Advanced..." to popup "Advanced Setting" box. Here you
can set advanced scan properties.
2. Manually Scan Channels
- Click on TV Advanced
Panel
;
- Click on EPG Channels
window
- Go to Options-> DTV
;
window, click "Scan"
button under "DTV
Source".
-10-
3. Abort Scanning:
Just press "Abort" button to stop scanning. (It is recommended
you finish scanning one time at least).
5.2 Watch Live TV Show
1. Select Channel: In EPG Channels window, double click a
desired channel; or click
to open channel list to select.
2. Switch Channel: click
3. Browse channel: click
or to switch channel.
to open channel list, all of the
channels will be displayed.
4. Return to Last Channel: click
to resume play the last
viewed channel.
5. Select Subtitle: click
6. Select Audio: click
to select your desired subtitle.
to select your desired audio.
5.3 Display Teletext
Note: The Teletext is activated only if HDTV service provider
1. Display Teletext:
- Click
- Click
2. Go To: Go to specified teletext page, or press
3. Hold: Keep displaying current teletext during other operations.
4. Transparent: Display Teletext over the current video by
has provided such service.
and tick "Teletext" in popup menu.
and tick "Show Teletext" in popup menu.
, to
go to previous or next page.
transparent mode.
-11-
5.4 Receive FM Radio
In EPG Channels window, the channel displayed with Radio
type or marked with
radio channel, you will begin to listen to radio, and the
Visualization effect will be default activated, video window will
display multi-colored shapes and patterns that change in
harmony with the audio track being played.
5.5 TimeShift
TimeShift means you can pause watching a live program to
have a break, when you come back you will resume watching
from the point at which you paused.
- Click to pause, The video screen will freeze, but the
recording will continue.
- Click
or to continue watching TV show from the
point at which it was paused.
- Click
two times to stop TimeShift and return to the live
program.
will be Radio channel. Double click a
Note: The record duration depends on your TimeShift Buffer
Size, which can be set in DTV Setting.
5.6 Program Guide
In EPG Guide panel, click a program to access program
details: program title, start time, end time and program
description.
-12-
Smart Search: Type the start time or
keyword of your desired programs in Search
box, all the relative program guide will be
displayed.
Click
, you will clear the search result and
resume display all the program guide.
5.7 Live Record TV Show
While you are watching a TV show, click
to pop up Record floating panel, you will
begin to record live HDTV show into MPEG2
file. You can also stop record, play record or
delete record file in this record panel.
5.8 Create Schedule Task
- In EPG_Schedule window, click to create a task.
- In EPG_Channel window, select a program with EPG guide
and click
- In EPG_Programs window, right click a program and select
“Add to Schedule”.
- In EPG_Favorite window, select a program with EPG guide
and click
Through one of above
steps to create a task
and eject below Task
box: here you can set
task name, task type
and task time.
Auto wakeup to perform
schedule task at PC
hibernation status:
.
.
-13-
Your PC can auto wakeup to launch schedule task in
hibernation status for power saving, the operation is below:
1. Set schedule task
2. Hibernate your PC
Note: To hibernate your PC, you must activate “Enable
Hibernation” in your PC’s Power Option Properties.
3. Your PC will auto wake up perform task at the schedule
time.
5.9 Schedule Record TV Show
Following 5.8 chapter “Create Schedule Task”, set task type as
“Recording File” and set task start time, it will auto record the
preset TV show by the task start time, even though you are
away from PC or your PC is hibernated.
5.10 Reminded to Watch
You will be reminded to watch TV show at the schedule time,
thus you will never miss any of your favorite program. Just set
Task Type as Viewing Reminder when you create schedule
task. The other operations are as schedule record TV.
5.11 Multi-channel Preview
- Preview while scanning channels: Tick
"Preview found channels" box while
scanning channels, each found channel
will sequentially display on video window.
- Multi-channel preview in EPG window:
Click
refresh channels, each program will
display on video window by sequence,
after refresh finishes, all programs’
snapshot will be listed in EPG Channels
window. Double click a program, you will
directly playback it.
in EPG-Channels window to
-14-
5.12 Favorite Management
- Add to favorite: In EPG_Channels
window, select a channel and click
or right click to add favorite.
- Watch favorite channel: double click
the favorite channel to directly watch
this channel's program.
- Favorite management: in
EPG_Favorite window, you can freely
create, rename, change or delete
favorite folder.
5.13 Take Snapshot
Click to take snapshot, the captured
image will display in Capture floating
panel, default saved as .bmp file in "My
Pictures" by sequence number 1, 2, 3,
etc.
You can freely capture, preview, delete,
copy or save the snapshot in Capture
floating panel.
6.0 Setting
Right click Video window and click Options, you will open
Options box for advanced setting, below we just take DTV and
Record setting as examples.
-15-
6.1 DTV Setting
1. Device: If a HDTV device installed or connected to your PC,
the device name will display.
2. Scan: click to launch channel scanning.
3. TimeShift:
- Buffer File: display the directory of buffer file. Please select
a directory with large enough space.
- Buffer Size: Hard disk size for buffer and saving paused
programs, the bigger size, the longer time of saving program.
Note: After you change the buffer file or buffer size, please
4. Days to keep EPG history: Set the days to keep the EPG
history, maximum 7 days to keep EPG history.
5. Clear History: Delete the EPG history.
6. Scroll browse programs: Selected to scroll browse
programs after click
restart the program to activate the change.
.
6.2 Record Setting
1. Record Type:
- MPEG2: record HDTV
show/DVD movie as
MPEG2 video file.
- MP3: record DVD audio
as MP3 audio file.
-16-
2. Save Record File to: Specify the patch to save the record
file.
3. Locate on Disk: To quickly open the record file’s folder.
7.0 Trouble Shooting
1. How to clear the saved channel:
Please exit the program firstly, then locate “DVB_T.gsl” file in
program installation folder and delete it.
2. Fail to search channel:
a. Expand frequency range
b. Adjust off-center frequency
c. Change parameter in Advanced Setting box
3. Fail to playback HDTV show:
Current channel has no data stream, please research channel.
Note: Please view the clock in Main Control Panel to check: if
clock change with the time, there is data stream; clock
4. Can not record some channel’s program:
The channel adopts AC-3 audio encoding mode
unchanged, no data stream.
The CE mark confirmed that this product meets the
main requirements of the Directive 1995/5/EC and
2006/95/EC of the European Parliament and the
Council of Europe concerning telecommunications
and terminals regarding the Safety and health of
users and of electro-magnetic interference
compliance. The CE has been demonstrated. These
statements are deposited by the manufacturer.
-17-
Loading...