Digital TV USB 2.0 Dongle
VG0002A
Quick Installation Guide
Table of Contents
1.0 Safety Instructions
2.0 Introduction
3.0 Installation
4.0 Total Media Software
5.0 CE – Declaration
1.0 Safety Instruction
1. Put the Device always on a stable and straight Surface. In case
of falling, the Device can be damaged.
2. Don’t place the Device into direct Sunlight or in Places with high
Temperature. This can damage it or shorten his average usefu l
Life.
3. Don’t place the Device in the near of Heat Sources, like
Radiators or other heat producing Devices.
4. Don’t expose the Device to Rain, Water, Wetness or high
Humidity.
5. Don’t place it in the Bathr oom or the Kitchen in the near of a
Sink. Avoid the direct Contact with Wa ter .
6. Don’t try to open the Device.
Congratulations on the purchase of the VG0002A!
Read the instructions and warning references in this operating
instructions carefully, before you use the product for the first time.
During neglect it can come to damages of the equipment.
1
2.0 Introduction
2.1 Product
2.2 Package Contents
1 x VG0002A Digital TV USB 2.0 Device
1 x portable Antenna
1 x Remote Control
1 x Quick Installation Guide (QIG)
1 x CD (Driver/Arcsoft TotalMedia/Software Manual)
2.3 System Requirements
Windows XP (SP2) 32/64bit / V i sta 32/64bit
Pentium IV 1.6GHz (Pentium 4 2.4GHz recommended)
mind. 256 MB RAM (512 MB empfohlen)
4 GB free hard drive space
(for DVB-T TV recording an d T i me S hi fting )
16-bit color display at 1024 x 768
DirectX 9.0
2
3.0 Installation
3.1 Software Installation
ATTENTION!! Please install following driver & software
before you plug VG0002A into y our PC or N B .
Driver Installation
Arcsoft TotalMedia Software Installation
Manual (TotalMedia Help files in Multi-Language
CD Autostart – Main Menu
)
1. Before using DVB-T USB device, please insert the Installation
CD and install all necessary driver and software.
2. If you are XP user, please make sure if you have installed
“DirectX9.0” before. (If you are VISTA user, the DirectX9.0 has
been installed. You don’t need to install it again)
3. Install driver by clicking “driver installation”. You only need to
follow the instruction to finish the driver installation.
4. When driver is installed, please install Arcsoft TotalMedia for
running DVB-T TV.
5. For TotalMedia application detail operation manual, please
refer to TotalMedia Help files. Click “Manual” and find an
appropriate language for TotalMedia manual.
3
3.2 Hardware Installation
When driver and software are installed, please connect Digital TV
USB Device to USB port and portable antenna to the connector
on device. For better TV signal reception, please shift the
portable antenna close to window as close as possible.
Note: Inform yourself about the Availability of DVB-T Transmitter
and offer of Telestation in your Region.
The reception signal may be influent by the distance / obstacle
objects, such as buildings, mountain area.
If the signal is not as good as expected, please change the
portable antenna to roof antenna for better reception.
4.0 Total Media Software
4.1 Introduction
1. Before launching TotalMedia, please make sure the Digital TV
USB device has been connected.
2. Total Media is a MCE like software, so when launched, you will
see different features on the front panel.
3. Click „TV“ to watch DVB-T
Click „Picture“ to manage your pictures
Click „Video“ to watch video clips
Click „Setup“ to adjust different parameter for functions
4
4.2 Total Media DVB-T TV Scanning
For the first time to use TotalMedia to watch DVB-T TV, the TV
program scanning is required. Please follow the following TV
scanning process to run the TV program scanning.
1. Press “Next” to start the TV signal scanning
2. Select your region and press “Next”
5
3. Press “Start” to run the Channel scanning.
4. When the scan is finished, please press “Finish” to fi nalize the
DVB-T TV program scanning
6
4.3 TotalMedia Interface Interview
7
4.4 Remote Control
1. POWER 6. VOLUME -
2. DOWN 7. Enter
3. UP 8. CHANNEL +
4. NUMBERS 9. CHANNEL -
5. VOLUME +
Note: the Remote Controller supports Total Media only.
5.0 The CE mark confirms that this product meets the main
requirements of Directive 1999/5 / CE of the European Parliament and the
Council of Europe concerning telecommunications and terminals regarding
the. The health and safety of users and to comply with regard to
electromagnetic interference. The CE conformity has been proven. The
corresponding declarations are lodged with the manufacturer.
8
Loading...