N211_system_V0.9
H.264 NETWORK CAMERA
USER MANUAL
Please read instructions thoroughly before operation and retain it for future reference.
Powerful Remote Surveillance
Distance makes no difference
To Our Valuable Customers,
Thank you for choosing this product. You’ll be amazed by those useful
functions this product provides, especially for the powerful mobile
surveillance support.
Remote access via different platforms is widely supported:
EagleEyes
a) For mobile platforms, iPhone®, BlackBerry®,
Nokia® Symbian®, Windows® Mobile & Android™
are available with our self-developed and free
program,
EagleEyes, installed.
b) For web browsers, Internet Explorer®, Mozilla®
Firefox®, Safari® and Google Chrome™ are
supported.
c) Apple’s media player, QuickTime®, is also one tool
you can use.
To monitor and control multiple network devices, you can also install our
free CMS software provided within the CD manual.
To know more about our mobile phone program, “EagleEyes”, and where to
download, please visit:
http://www.eagleeyescctv.com
To know more about feature applications, please visit:
www.eagleeyescctv.com/video
To seek for technical support, please contact:
support@eagleeyescctv.com
To give us your precious suggestions and comments, please contact:
marketing@eagleeyescctv.com
IMPORTANT SAFEGUARD
All lead-free products offered by the company comply with the requirements of the
European law on the Restriction of Hazardous Substances (RoHS) directive, which means
our manufacture processes and products are strictly “lead-free” and without the hazardous
substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the product
must be collected separately at the product end-of-life. This applies to your product and
any peripherals marked with this symbol. Do not dispose of these products as unsorted
municipal waste. Contact your local dealer for procedures for recycling this equipment.
Trademark Acknowledgements
iPhone® is the registered trademark of Apple Inc.
BlackBerry® and related trademarks, names and logos are the property of Research In Motion Limited and
are registered and/or used in the U.S. and countries around the world. Used under license from Research In
Motion Limited.
Android™ is a trademark of Google Inc. Use of this trademark is subject to Google Permissions.
Microsoft, Windows, Internet Explorer, Mozilla FireFox, Google Chrome, QuickTime, Windows Mobile &
Symbian mentioned in this document are the registered trademarks of their respective holders.
Disclaimer
We reserve the right to revise or remove any content in this manual at any time. We do not warrant or
assume any legal liability or responsibility for the accuracy, completeness, or usefulness of this manual. The
content of this manual is subject to change without notice.
Trademark Acknowledgements
Internet Explorer, Microsoft, Windows, Mozilla & QuickTime are registered trademarks of the respective
holders.
MPEG4 Licensing
THIS PRODUCT IS LICENSED UNDER THE MPEG4 VISUAL PATENT PORTFOLIO LICENSE FOR
THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN
COMPLIANCE WITH THE MPEG4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING
MPEG4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY
MPEG LA TO PROVIDE MPEG4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY
OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL
AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE
HTTP://WWW.MPEGLA.COM.
GPL Licensing
This product contains codes which are developed by Third-Party-Companies and which
are subject to the GNU General Public License (“GPL”) or the GNU Lesser Public License
(“LGPL”).
The GPL Code used in this product is released without warranty and is subject to the
copyright of the corresponding author.
Further source codes which are subject to the GPL-licenses are available upon request.
We are pleased to provide our modifications to the Linux Kernel, as well as a few new
commands, and some tools to get you into the code. The codes are provided on the FTP
site, and please download them from the following site or you can refer to your distributor:
http://download.dvrtw.com.tw/GPL/076D_Series/arm-linux-2.6.tar.gz
TABLE OF CONTENTS
1. OVERVIEW......................................................................................................................................... 1
1.1 Product Features....................................................................................................................................... 1
1.2 Package Content....................................................................................................................................... 1
1.3 Hardware Overview................................................................................................................................... 1
1.4 Rear Panel ................................................................................................................................................ 2
2. BEFORE USING THE NETWORK CAMERA ..................................................................................... 3
3. ACCESSING THE CAMERA VIA VIDEO VIEWER ............................................................................. 4
3.1 Accessing the camera............................................................................................................................... 4
3.2 Control panel overview.............................................................................................................................. 4
3.2.1 Simplified Version (Default)..............................................................................................................................4
3.2.2 Full Function Version........................................................................................................................................5
3.2.3 Main Button Overview ......................................................................................................................................5
3.3 Frequently-used functions......................................................................................................................... 6
3.3.1 Record..............................................................................................................................................................6
3.3.2 Playback...........................................................................................................................................................6
3.3.3 Firmware Upgrade ...........................................................................................................................................7
3.3.4 E-Map...............................................................................................................................................................7
4. SYSTEM CONFIGURATION ............................................................................................................ 12
4.1 General ................................................................................................................................................... 13
4.1.1 Log .................................................................................................................................................................13
4.1.2 Account...........................................................................................................................................................13
4.1.3 OnLineUser ....................................................................................................................................................15
4.1.4 Trigger ............................................................................................................................................................15
4.2 Network ................................................................................................................................................... 16
4.2.1 QoS ................................................................................................................................................................16
4.2.2 DDNS .............................................................................................................................................................16
4.2.3 SNTP..............................................................................................................................................................17
4.2.4 FTP.................................................................................................................................................................17
4.2.5 MAIL ...............................................................................................................................................................17
4.2.6 Filter ...............................................................................................................................................................18
4.2.7 UPnP ..............................................................................................................................................................18
4.3 Video ....................................................................................................................................................... 19
4.4 Color........................................................................................................................................................ 19
4.5 Time ........................................................................................................................................................20
5. ACCESSING THE CAMERA VIA WEB BROWSER.......................................................................... 21
5.1 Accessing the camera............................................................................................................................. 21
5.2 Control panel overview............................................................................................................................ 22
5.2.1 Live View Panel..............................................................................................................................................22
5.2.2 System Configuration Panel...........................................................................................................................23
1
1. OVERVIEW
1.1 Product Features
Low-latency video streaming with H.264 compression format for sharp and clear images
Hybrid digital / analog video output
It is friendly to use by wizard with browser
Motion detection
Complete IP surveillance system, such as the Central Management System (CMS) software,
Network-Attached Storage (NAS), Network Video Recorder (NVR), etc.
1.2 Package Content
□ Network camera □ RJ45 network cable
□ Installation Guide □ Adapter
□ CD-ROM disc (including user manuals & CMS
software “Video Viewer”)
□ Bracket
1.3 Hardware Overview
2
1.4 Rear Panel
CONNECTOR / BUTTON DESCRIPTION
Reset Default This button is hidden in the pinhole. Press and hold the reset button until the
network camera rebooted. This will reset all parameters, including the IP address
to factory default settings.
Power Indicator When the camera is power-supplied, this indicator will be on as red.
Video Output Connect to the video input connector of your monitor with a video cable (i.e. a RCA
cable with the BNC connector, or a coaxial cable for video output.
* The video cable is optional.
LAN Connect the camera to the network with the supplied RJ45 cable.
Power Connector Connect the DC 12V adapter for power supply.
3
2. BEFORE USING THE NETWORK CAMERA
Before using the network camera, make sure:
1) You have installed the supplied CMS software, “Video Viewer”.
2) You have configured the network settings, and the network connection is fine.
If not, please refer to your the installation guide.
This network camera can be accessed via our supplied CMS software “Video Viewer”, or the web
browser “Microsoft Internet Explorer” or “Mozilla Firefox” depending on different using situations.
To check or configure up to 16 surveillance devices simultaneously with the record function, please use
“Video Viewer”.
For details about using Video Viewer, please refer to “3. ACCESSING THE CAMERA VIA VIDEO
VIEWER” at page 4, and “4. SYSTEM CONFIGURATION” at page 12.
To check or configure this network camera only, it’s recommended to use the web browser “Microsoft
Internet Explorer” or “Mozilla Firefox”.
For details about using the web browser, please refer to “5. ACCESSING THE CAMERA VIA WEB
BROWSER” at page 21.
4
3. ACCESSING THE CAMERA VIA VIDEO VIEWER
3.1 Accessing the camera
Step1: Double-click “ ” on your PC desktop to open Video Viewer. By defaults, the “Address
Book” panel will be displayed on the right side of the control panel.
Step2: Click “
” to select the IP address of the camera you intend to connect, and double-click
it.
Step3: The live view is displayed in the Video Viewer.
3.2 Control panel overview
Two control panels are available and can be switched depending on your using habit.
3.2.1 Simplified Version (Default)
5
3.2.2 Full Function Version
3.2.3 Main Button Overview
Button
Simplified Full Function
Function Description
Address Book
Click to show the predefined IP address(es). You can add, remove or
search the IP address to log in the DVR remotely.
Remote
Config
Click to go to the detailed system configuration.
For details, please refer to “4. SYSTEM
CONFIGURATION” at page 12.
Record
Setting
Click to go to the detailed record setting. For
details, please refer to “3.3.1 Record” at page 6.
Miscellaneous
Control
Custom
Setting
Click to choose the language of this program, or
set the password when activating this program.
The changes will take effect when this program
is closed and executed again.
Log
Click to view all event and recording logs, search the desired log(s) by
date, or playback the recording of the selected log.
/ /
Record / Record
Stop
Click to start / stop the manual recording.
The record button will be disabled when the reserved disk capacity set in
“Record Setting” is larger than the current disk capacity. For details,
please refer to “3.3.1 Record” at page 6.
Snapshot
Click to take a snapshot of the current view. The snapshot will be saved
in the path you specified in “Record Setting”.
Information Click to show the current network connection details.
6
3.3 Frequently-used functions
3.3.1 Record
To record remotely, click “ ” or “ ” → “ ” to go to the “Record Setting” page.
In the “Record Setting” page, you can set the following items:
‧Record type
‧Pre- / post-event record time (0~10 seconds)
‧Record time setting
‧Record path
Note: The record function will be disabled when the reserved disk capacity in “Reserved(MB)” is larger
than the current disk capacity in “Free(MB)”.
When “Manual” is checked, click “ ” or “ ” on the main control panel to start the manual recording
immediately, and the recordings will be saved in the location specified in “Record Path”.
When “Motion” and / or “Alarm” are checked, the recording function will be enabled for any motion or alarm event,
and the recordings will be saved in the location specified in “Record Path”.
3.3.2 Playback
To play a recording, click “ ” or “ ”, and select the “Record” tab. A list of all the recordings will be shown by
defaults, and you can also sort out the logs you want to speed up the search time.
7
3.3.3 Firmware Upgrade
This function is used when users need to upgrade the network camera for function scalability.
Note: Before using this function, make sure you have the correct upgrade files provided by your installer
or distributor.
Step1: Click “ ”, and select the IP address of your network camera in the address book.
Step2: Click “
” to show the upgrade page, “Update Server”.
Step3: Click “Add” to browse to the upgrade files.
Step4: Click “Upgrade Firmware” to start firmware upgrade.
Note: It takes a few minutes to finish the upgrade process. Do not disconnect the power during firmware
upgrade, or the upgrade may be failed. The camera will reboot after the upgrade.
Step5: Select the IP address of the camera and click “ ” again to check if the firmware is upgraded.
3.3.4 E-Map
Video Viewer is also a Central Management System (CMS) software, which allows network device control &
management for up to 16 devices simultaneously.
Note: Before using this function, make sure Video Viewer is connected to all the devices (up to 16) you
want to monitor.
E-Map is ONLY available when the control panel is switch to the full function version.
How to Add an E-Map Group
STEP1: In the simplified version, click “ ” to switch the control panel to the full function version, and click “ ”
to enter the E-Map page as follows.
Note: To know where the buttons are, please refer to “3.2.1 Simplified Version (Default)4 at page 4, and
“3.2.2 Full Function Version” at page 5.
8
STEP2: Right-click to show the shortcut menu on the top-left panel, and select the E-Map group you want to add.
There are three E-Map groups you can add: Google E-MAP, Single E-MAP, and Building E-MAP.
9
STEP3: When the E-Map group is created, you will see the tree on the top-left panel, showing all the devices
you’ve added to this group.
Icon Description
The connected device is camera. When it’s selected, it will become red.
The connected device is DVR. When it’s selected, it will become red.
For any motion or alarm event, it will appear on the screen to catch your attention.
To know what’s happening quickly, double-click the device icon on the E-Map to show the live view.
10
How to Edit / Remove an Existing E-Map Group
For Google E-Map Group
Right-click on the group name to show the shortcut menu list, and select
“Edit E-MAP” or “Remove E-MAP” as needed.
You can also add a single E-Map group (Add Single E-MAP) or Building
E-Map group (Add Building E-MAP) into the existing Google E-Map
group.
For Single E-Map Group
Right-click on the group name to show the shortcut menu list, and select
“Edit E-MAP” or “Remove E-MAP” as needed.
11
For Building E-Map Group
Right-click on the group name to show the shortcut menu list, and select
“Edit Building E-MAP” or “Remove E-MAP” as needed.
12
4. SYSTEM CONFIGURATION
Before using the network camera, make sure you have installed the supplied software, “Video
Viewer”, and configure network settings. If not, please refer to your installer or the installation guide.
Note: It’s recommended to consult with your installer before changing system
configurations.
Note: You need to be the supervisor to enter the system configuration page. If not,
please re-log into the camera with the supervisor user level.
Click “ ” and select “ ” to enter the system configuration page. All the system configurations
are listed as a tree structure on the left panel as follows.
Main Menu Sub-menu What you can do for this function?
General 1. Check the firmware version & MAC address of the camera.
2. Change the camera title.
Log Check the system event logs.
Account 1. Create a new user account with different access privilege.
2. Modify or delete an existing user account.
OnLineUser Check the current online user(s).
Trigger 1. Enable / disable the motion detection.
2. Set the motion detection area.
3. Select the event notification method.
Network Configure network settings.
QoS Limit the data flow for live streaming.
DDNS Enter DDNS information when the network type is PPPOE or DHCP.
SNTP Synchronize your camera time with the networked computer systems.
FTP Enter the FTP information for event notifications when “FTP” is chosen in “General” →
“Trigger”.
MAIL Enter Email information for event notifications when “Email” is chosen in “General” →
“Trigger”.
Filter Choose to permit or block the IP address(es) which can access this camera.
UPnP Allow this camera to be detected among devices within the same network area for easy and
quick usage.
Video Set the image resolution, quality and frame rate.
Color Adjust the color performance.
Time Set daylight saving time and the current time.
13
4.1 General
In “General”, you can check the general information for your network camera, such as the firmware
version and MAC address, and also modify the identification name of your camera (up to 15
alphanumeric characters).
4.1.1 Log
To quickly search the system log you want by event type, click the drop-down list to select the
system log type you want to check, and click “Reload” to refresh the list.
To clear all system event logs, click “Clear”.
4.1.2 Account
You can create a new account with different user access privilege, or delete or modify an
existing account setting.
How to create a new account
Step1: Click “New”, and fill in the following columns.
14
Column Description
User Name Set a user name that will be used for camera access. The user name allows up to 16 alphanumeric characters.
Password Set the password that will be used for remote login. The password allows up to 16 alphanumeric characters.
User Level Set the security level of an account to give the permission to control different functions. There are four user
levels: Supervisor, Power User, Normal User and Guest.
Life Time Select how long this account is allowed to stay online (1 MIN / 5 MIN / 10 MIN / 1 HOUR / 1 DAY / INFINITE)
Step2: Then, click “Apply” to save your setting and create a new account.
How to modify or delete an existing account
Step1: Select the account you want to modify or delete.
Step2: To modify the account, change the setting directly, and click “Apply”.
To remove the account, click “Delete”.
Note: It’s not allowed to remove an account when there’s only one account in the
account list.
15
4.1.3 OnLineUser
You can check the current online user(s) with respective online information. To refresh the list,
click “Refresh”.
4.1.4 Trigger
You can set the motion or alarm detection and select the notification function.
Trigger Setting
In this section, you can select to enable or disable the alarm or motion detection.
Item Description
Select to enable or disable the motion detection function.
‧ Motion Detection Area Setting
When “Enable” is selected, click “Setting” to enter the motion detection area setting page as follows:
Sensitivity:
Set the detection sensitivity (High / Normal / Low).
Area Setting:
Motion
Set the motion detection area by selecting the area grids with your mouse. Pink grids represent the area that is not being
detected while the transparent grids are the area under detection. You can set multiple areas under detection.
Click “－” (Clear All) to set the whole area undetected.
Click “＋” (Select All) to set the whole area under detection.
Duration Set the duration time for trigger recording (5 / 10 / 20 / 40 seconds).
16
Notification Setting
In this section, you can select to enable E-mail and/or FTP notification when an alarm or a
motion happened.
Item Description
Method ‧Email
When this option is checked, the network camera will send the captured video clip or image to the
assigned E-mail address(s) once motion or alarm recording happened.
‧FTP
When this option is checked, the network camera will upload the captured video clip or image to the
specified FTP site once motion or alarm recording happened.
Video Type Select the file type of the notification files: H264 (video) / MPEG4 (video) / JPEG (image).
Total Set the record time of the notification video clip (1 ~ 5 seconds).
4.2 Network
You can set the network configuration of the network camera depending on your network type. For
details, please refer to your installation guide.
4.2.1 QoS
QoS, Quality of Service, is the ability to control the data flow for real-time streaming. This
function is important if your network bandwidth is insufficient and you have other devices to
share the network bandwidth.
Check “QoS Enable”, and set the max. upload rate from 256 to 10240 kbps.
4.2.2 DDNS
Select “On” when the selected network type in “Network” is “PPPOE” or “DHCP”. For details,
please refer to the installation guide.
17
4.2.3 SNTP
SNTP (Simple Network Time Protocol) is used to synchronize your camera time with the
networked computer systems.
Function Description
GMT (Greenwich Mean Time) Once users choose the time zone, the network camera will adjust the local area time
of the system automatically.
Server Name Simply use the default SNTP server (For example, tock.stdtime.gov.tw) or change to
another server with which users are familiar.
Sync. Period Select “Daily” to synchronize the camera time with the network time every day or
“None” to turn off this function.
Sync Server Time Click and the network camera will synchronize the time with the network time.
4.2.4 FTP
Enter the detailed FTP information and click “Apply” to confirm. The information you set here
will be applied when “FTP” is selected in “General” → "Trigger".
4.2.5 MAIL
Enter the detailed E-mail information and click “Apply” to confirm. The information you set here
will be applied when “Email” is selected in “General” → "Trigger".
18
Function Description
Server Enter the SMTP server address provided from your e-mail system supplier.
Mail From Enter the entire mail address to ensure E-mails will not be blocked by SMTP.
Verify Password Some mail servers are required to verify the password. Please enter the “user name” and
“password”.
Email Address Add the E-mail address(s) of the assigned recipient(s).
4.2.6 Filter
Choose to permit or block the IP address(es) which can access this camera.
Function Description
Error Login Count Set the maximum count for login failure. When the maximum count is reached, the IP address
trying to access the network camera will be locked.
Error Lock Time Set the lock time in minutes when the maximum count of error login for an IP address is reached.
Echo Request Select “Non-Block” to allow other users to use the ping command to detect the IP address of your
network camera, or “Block” to deny the ping command request.
Filter Choose to enable (YES) or disable (NO) the filter function.
If “YES” is selected, choose whether you want to permit (Allow) or block (Deny) the IP address list
below.
‧ To add an item to the IP address list, key in the IP address in “IP Address”, and click “Add”.
‧ To remove an existing item in the IP address list, click the item you want to remove, and click
“Delete”.
Apply Click “Apply” on the bottom right corner when any change is made in this menu, or the change will
not be recorded in the system.
4.2.7 UPnP
“UPnP” stands for “Universal Plug and Play”, which allows devices to connect seamlessly in
the home and corporate environments and simplify installation of computer components.
Check “Enable UPnP” to allow the network camera to be detected among devices within the
same network area, and set the identification name of the camera in “Friendly name”.
19
When this function is activated, the other PC within the same domain as this camera will be
able to search this camera in “Network Neighbor” with the identification name set in “Friendly
name”. Double-click it to quickly open the web browser for camera access.
For details about camera access via the web browser, please refer to “5. ACCESSING THE
CAMERA VIA WEB BROWSER” at page 21.
4.3 Video
Set the image resolution, quality and frame rate.
Item Description
JPEG / MPEG / H264 Select the image resolution and quality.
Image Resolution: CIF / 4CIF
Image Quality: BEST / HIGH / NORMAL / LOW
Frame Rate The frame rate allowed to each viewer can be adjusted to adapt to the bandwidth on the network.
Set the desired image frequency to the maximum (FULL) or to a specified frame rate (1/2; 1/3; 1/4;
1/5; 1/10; 1/15; 1/20; 1/25; 1/30).
The actual frame rate depends on the actual network connection, and may be lower than the specified
one.
4.4 Color
Adjust the color performance from Brightness, Contract, Hue and Saturation. Click and drag the
slider to preview the color change on the live view panel and adjust the image color. Then, click
“Apply” to confirm the change.
To restore the default values, click “Default”, and click “Apply” to confirm the change.
20
4.5 Time
Set daylight saving time and the current time.
Function Description
Daylight Saving
Specify whether to use daylight saving time (ON / OFF).
If this function is enabled, set the time period (START / END), and adjust the daylight saving time in hours
(ADJUST).
Time Set the current time.
21
5. ACCESSING THE CAMERA VIA WEB BROWSER
Users can also access the network camera via a web browser, such as Microsoft Internet Explorer or
Mozilla Firefox.
However, the web browser is only available for single device access. If users want to access more
than two devices through one interface, it’s recommended to use our supplied CMS software, Video
Viewer. For details, please refer to “3. ACCESSING THE CAMERA VIA VIDEO VIEWER” at page 4.
Before using the network camera, make sure you have configured the network settings and have the
IP address, user name and password used for accessing the camera in hand. If not, please refer to
the installation guide.
5.1 Accessing the camera
Step1: Open your web browser, and key in http://ipaddress:portnum in the URL address box.
For example, for IP address 60.121.46.236 and port No. 888, please key
in ”http://60.121.46.236:888” into the URL address box, and press “Enter”.
Step2: In the login page, key in the user name and password, and enter the security code from the
image below. Then, click “LOGIN”.
Step3: The wizard is then starting analyzing your network environment, and shows your network
environment.
‧ To continue setting the password, date & time, and network, click “Next” and follow the step-by-step
instructions.
‧ To skip the wizard and directly access the camera live view, click “Close”.
‧ To directly access the camera live view without starting the wizard for the login next time, check “Do not start
wizard at login”.
Step3: When the login is successful, the live view is shown similar as follows.
22
5.2 Control panel overview
5.2.1 Live View Panel
Function Icon User Level Description
Media Type -- Supervisor / Power User /
Normal User / Guest
Select the web transmission format from the
drop-down list:
H.264 / MPEG-4 / Motion JPEG / QuickTime
For users using Mozilla Firefox, only “QuickTime” is
selectable.
QuickTime is Apple Inc.’s multimedia software. You
need to have QuickTime installed in you operating
system before selecting “QuickTime”. When it is
selected, you will be promoted to enter the user name
and password to access the camera.
Video Quality -- Supervisor / Power User /
Normal User
Click & drag the slider to select the video quality:
Basic / Normal / High / Best.
Video Resolution Supervisor / Power User /
Normal User
Select the video resolution from the drop list: 4CIF /
CIF.
Snapshot
Supervisor / Power User /
Normal User
Click to take a snapshot for the current view, and a
new browser window will be opened to display the
23
Function Icon User Level Description
captured image.
Flip
Supervisor / Power User /
Normal User
Click to rotate the image 180
0
counterclockwise when
necessary.
Full Screen
Supervisor / Power User /
Normal User
Click to display the image in full screen.
5.2.2 System Configuration Panel
Click “Configuration” to enter the configuration page.
Note: You need to be the supervisor to enter the system configuration page. If not,
please re-log into the camera with the supervisor user level.
The functions are categorized into three menus: Network, Camera and General.
For details about “Network”, please refer to “4.2 Network” at page 16.
For details about “Camera”, please refer to “4.4 Color’ at page 19, and “4.5 Time” at page 20.
For details about “General”, please refer to “4.1 General” at page 13, and “4.3 Video” at page 19.
24
Main Menu Sub-menu Reference
Network Network
Remote Config Network
QoS
Remote Config Network QoS
DDNS
Remote Config Network DDNS
SNTP
Remote Config Network SNTP
FTP
Remote Config Network FTP
Mail
Remote Config Network MAIL
Filter
Remote Config Network Filter
UPnP
Remote Config Network UPnP
Camera Color
Remote Config Color
Time
Remote Config Time
General General
Custom Setting
Server Log
Remote Config General Log
Login
Remote Config General Account
Account
Remote Config General Account
Trigger
Remote Config General Trigger
Video
Remote Config Video
Google Maps
Allows you to know where the network camera is.
The system will prompt you to apply a Goole Maps Key if your access is
denied. Please follow the instructions below when you’re denied:
1. Click “Sign up for a Google Maps key” to enter the application page.
2. Check the terms and conditions, and enter the IP address of the network
camera. Then, click “Generate API Key”.
3. Copy the generated API key, and click “Update Google Maps Key” on the
web browser to paste it.
Upgrade
.
For details, please refer to “3.3.3 Firmware Upgrade” at page 7.
25
APPENDIX PRODUCT SPECIFICATIONS
▓ Network
LAN Port YES
LAN Speed 10/100 Based-T Ethernet
Supported Protocols
DDNS, PPPoE, DHCP, NTP, SNTP, TCP/IP,
ICMP, SMTP, FTP, HTTP, RTP, RTSP
Frame Rate NTSC:30, PAL:25
Number of Online Users 10
Security Multiple user access levels with password
Web management software YES (Control up to 16 network cameras simultaneously)
▓ Video
Video Compression H.264 / MPEG4 / MJPEG
Video Remote Control YES
Video Adjustment Brightness, Contrast, Saturation and Hue
Mobile Supports 3GPP mobile surveillance
▓ Camera
Image Sensor 1/3” H.R. image sensor
Pixels 768(H) x 494(V) <NTSC> / 752(H) x 582(V) <PAL>
Lens f4.6mm
F-number F1.9
Viewing Angle 60°
Shutter Speed 1 / 60 (1/50) to 1 / 100,000 sec.
Min Illumination 1 Lux
Video Output 1.0 Vp-p. 75Ω
BLC AUTO
White Balance ATW
▓ Others
Remote Control YES
Motion Detection YES
Power DC12V, 0.5A
Operating Temperature 0~40℃
Humidity 85%
Minimum Web Browsing Requirements
‧Pentium 4 CPU 1.3 GHz or higher, or equivalent AMD
‧256 MB RAM
‧AGP graphics card, Direct Draw, 32MB RAM
‧Windows XP, Windows 2000 Server, ME, 98, DirectX 9.0 or later
‧Internet Explorer 6.x or later
Dimensions (mm)** 152.5(L) x 115.2(W) x 40.2(H) (6.00” x 4.54” x 1.58”)
Shipping Weight 812g (1.79 lbs) including mounting bracket and power supply
In/Out Door Use Indoor
** The specifications are subject to change without notice.
** Dimensional tolerance: ± 5mm
Loading...